Date: 23 Feb 2003 18:48:12 -0600 From: "John R. Makosky" <jrm@crackpot.org> To: freebsd-stable@freebsd.org Subject: burncd problem with NEC NR-7500A CD burner in DAO mode Message-ID: <1046047691.17201.19.camel@benny.wirgl.net>
next in thread | raw e-mail | index | archive | help
Hello,
When attempting to burn audio tracks to CD-R in DAO mode with an NEC
NR-7500A CD burner, I get errors, regardless of media used, and burning
speed. The same hardware works fine under Linux, using cdrecord. I am
able to burn both data and audio in non-DAO mode with no problems.
burncd output:
-------------
# burncd -f /dev/acd0c -s 8 -v -d audio *.raw fixate
adding type 0x00 file audio_01.raw size 149859 KB 65245 blocks
adding type 0x00 file audio_02.raw size 97353 KB 42385 blocks
adding type 0x00 file audio_03.raw size 43445 KB 18915 blocks
adding type 0x00 file audio_04.raw size 57518 KB 25042 blocks
adding type 0x00 file audio_05.raw size 50584 KB 22023 blocks
adding type 0x00 file audio_06.raw size 97180 KB 42310 blocks
adding type 0x00 file audio_07.raw size 51684 KB 22502 blocks
adding type 0x00 file audio_08.raw size 80500 KB 35048 blocks
adding type 0x00 file audio_09.raw size 96278 KB 41917 blocks
adding type 0x00 file audio_10.raw size 81883 KB 35650 blocks
next writeable LBA 0
CUE sheet:
01 00 00 01 00 00 02 00
01 01 01 00 00 00 04 00
01 02 00 00 00 0e 21 46
01 02 01 00 00 0e 23 46
01 03 00 00 00 17 3b 05
01 03 01 00 00 18 01 05
01 04 00 00 00 1c 0b 14
01 04 01 00 00 1c 0d 14
01 05 00 00 00 21 2d 0c
01 05 01 00 00 21 2f 0c
01 06 00 00 00 26 26 3c
01 06 01 00 00 26 28 3c
01 07 00 00 00 30 02 46
01 07 01 00 00 30 04 46
01 08 00 00 00 35 02 48
01 08 01 00 00 35 04 48
01 09 00 00 00 3c 32 14
01 09 01 00 00 3c 34 14
01 0a 00 00 00 46 09 0c
01 0a 01 00 00 46 0b 0c
01 aa 01 01 00 4e 04 25
addr = 150 size = 153456240 blocks = 65245
writing from file audio_01.raw size 149859 KB
only wrote -1 of 37632 bytes err=5
addr = 65395 size = 99689520 blocks = 42385
writing from file audio_02.raw size 97353 KB
only wrote -1 of 37632 bytes err=5
addr = 107780 size = 44488080 blocks = 18915
writing from file audio_03.raw size 43445 KB
only wrote -1 of 37632 bytes err=5
addr = 126695 size = 58898784 blocks = 25042
writing from file audio_04.raw size 57518 KB
only wrote -1 of 37632 bytes err=5
addr = 151737 size = 51798096 blocks = 22023
writing from file audio_05.raw size 50584 KB
only wrote -1 of 37632 bytes err=5
addr = 173760 size = 99513120 blocks = 42310
writing from file audio_06.raw size 97180 KB
only wrote -1 of 37632 bytes err=5
addr = 216070 size = 52924704 blocks = 22502
writing from file audio_07.raw size 51684 KB
only wrote -1 of 37632 bytes err=5
addr = 238572 size = 82432896 blocks = 35048
writing from file audio_08.raw size 80500 KB
only wrote -1 of 37632 bytes err=5
addr = 273620 size = 98588784 blocks = 41917
writing from file audio_09.raw size 96278 KB
only wrote -1 of 37632 bytes err=5
addr = 315537 size = 83848800 blocks = 35650
writing from file audio_10.raw size 81883 KB
only wrote -1 of 37632 bytes err=5
-------------------------------------------------------------------------------
dmesg output:
------------
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.7-STABLE #1: Tue Feb 18 23:04:36 CST 2003
root@benny:/usr/obj/usr/src/sys/BENNY
Timecounter "i8254" frequency 1193182 Hz
CPU: AMD-K6(tm) 3D+ Processor (451.03-MHz 586-class CPU)
Origin = "AuthenticAMD" Id = 0x591 Stepping = 1
Features=0x8021bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,PGE,MMX>
AMD Features=0x80000800<SYSCALL,3DNow!>
real memory = 268369920 (262080K bytes)
avail memory = 257167360 (251140K bytes)
Preloaded elf kernel "kernel" at 0xc03e7000.
K6-family MTRR support enabled (2 registers)
md0: Malloc disk
Using $PIR table, 7 entries at 0xc00fdde0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <VIA 82C598MVP (Apollo MVP3) host bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <VIA 82C598 (Apollo MVP3) host to PCI bridge> mem
0xd8000000-0xdbffffff at device 0.0 on pci0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0
on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Rage128-RL graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <VIA 82C596 ATA66 controller> port 0xe000-0xe00f at device 7.1
on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
uhci0: <VIA 83C572 USB controller> port 0xe400-0xe41f irq 10 at device
7.2 on pci0
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x1106, dev=0x3050) at 7.3
sis0: <NatSemi DP83815 10/100BaseTX> port 0xe800-0xe8ff mem
0xe3000000-0xe3000fff irq 5 at device 18.0 on pci0
sis0: Ethernet address: 00:02:e3:05:47:5d
miibus0: <MII bus> on sis0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pcm0: <AudioPCI ES1373-B> port 0xec00-0xec3f irq 9 at device 19.0 on
pci0
pcm0: <Cirrus Logic CS4297A ac97 codec>
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
orm0: <Option ROM> at iomem 0xc0000-0xc7fff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 17206MB <WDC AC418000D> [34960/16/63] at ata0-master UDMA66
acd0: CD-RW <_NEC NR-7500A> at ata1-master WDMA2
Mounting root from ufs:/dev/ad0s4a
cd9660: RockRidge Extension
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
acd0: WRITE_BIG - ILLEGAL REQUEST asc=0x21 ascq=0x02 error=0x04
Can anyone shed any light on this problem?
Thanks in advance,
John
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1046047691.17201.19.camel>