Date: Wed, 08 Sep 2004 18:47:14 +0200 From: Tomas Randa <lists@hosting50.cz> To: freebsd-mobile@freebsd.org Subject: Re: Help with Ath0 Message-ID: <1094662034.652.21.camel@ares.office.internetservice.cz> In-Reply-To: <005c01c4959c$b5d6da50$da18b4c8@everton> References: <005c01c4959c$b5d6da50$da18b4c8@everton>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, I am running ath, but 2.4 GHz (DWL-G520) on FreeBSD 5.3 BETA3 without problems. Did tou tryied to fix speed for example on 18Mbps on both sides? try ifconfig ath0 mode 11a media OFDM/18Mbps on both sides. Or try any other configuration - ifconfig -m With new drivers from Sam I have problems on 11g, system is unstable Tomas Randa On Wed, 2004-09-08 at 14:09, Everton - Matrix wrote: > Hi there folks, > > This issue has been discussed before on this list, but i could not solve my > problems reading the previous messages...so, here it go! :-) > > I´m trying to use the ath0 drivers on a FreeBSD 5.3Beta2 box, but i´m having > some problems with it... > > While trying to use the old drivers, things wasn´t going that great, I was > getting a bunch of duplicate packets, then following Sam instructions (to > another guy who was having the same problems...) I´ve upgraded the ath0 > drivers to the newest one, but after that, I can´t even "ping" anymore...and > I´m getting the error message, as follows: > > ath0: bogus xmit rate 0x3 > > Can anyone give me a help on this issue? > > Here follows some specifications of my setup, it´s a FreeBSD 5.3BETA2 server > with a DLink AG 520 PCI wireless card, the mode is 802.11a and the link > distance is 5,5km long. I´m also using a 22db/5.8G Anthen. > > One interesting fact is that I´ve tested this in a shorter distance link > (1km), and it all worked great. (with the old drivers!!!) > > Thanks in advance and Best Regards. > > []´s > > Everton > > _______________________________________________ > freebsd-mobile@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-mobile > To unsubscribe, send any mail to "freebsd-mobile-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1094662034.652.21.camel>