Date: Mon, 23 Sep 2024 21:08:13 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: jrm@FreeBSD.org, dougm@FreeBSD.org, dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #25549 - Failure Message-ID: <1118512593.7843.1727125694102@jenkins.ci.freebsd.org>
next in thread | raw e-mail | index | archive | help
------=_Part_7842_759310733.1727125693641 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable FreeBSD-main-amd64-test - Build #25549 (0a7e5f1f02aad2ff5fff1c60f44c6975fd0= 7e1d9) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25549= / Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25549/c= hanges Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25549/co= nsole Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) 75d9de99aec2d9f3bdc495c91bbd6d7a2392e2a3 by jrm: Import tcpdump 4.99.5 f1aaef47a01ad2b690ea251a42cbff99511459cf by dougm: swap_pager: update meta_free comment The end of the build log: [...truncated 3.78 MiB...] epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:11:da:1d:99:0a epair1b: Ethernet address: 02:11:da:1d:99:0b epair1a: link state changed to UP epair1b: link state changed to UP bridge0: link state changed to UP epair0a: promiscuous mode enabled epair1a: promiscuous mode enabled epair0b: promiscuous mode enabled carp: 1@epair0b: INIT -> BACKUP (initialization complete) epair1b: promiscuous mode enabled carp: 1@epair1b: INIT -> BACKUP (initialization complete) carp: 1@epair0b: BACKUP -> MASTER (master timed out) epair1a: promiscuous mode disabled epair0a: promiscuous mode disabled bridge0: link state changed to DOWN epair0a: link state changed to DOWN carp: 1@epair0b: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0b: promiscuous mode disabled epair1a: link state changed to DOWN carp: 1@epair1b: BACKUP -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair1b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair1b: promiscuous mode disabled passed [6.504s] sys/netinet/carp:vrrp_v6 -> bridge0: Ethernet address: 58:9c:fc:10:ff:f3 epair0a: Ethernet address: 02:54:06:c6:73:0a epair0b: Ethernet address: 02:54:06:c6:73:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:dc:17:41:44:0a epair1b: Ethernet address: 02:dc:17:41:44:0b epair1a: link state changed to UP epair1b: link state changed to UP epair0a: promiscuous mode enabled epair1a: promiscuous mode enabled bridge0: link state changed to UP epair0b: promiscuous mode enabled carp: 1@epair0b: INIT -> BACKUP (initialization complete) epair1b: promiscuous mode enabled carp: 1@epair1b: INIT -> BACKUP (initialization complete) carp: 1@epair0b: BACKUP -> MASTER (master timed out) epair1a: promiscuous mode disabled epair0a: promiscuous mode disabled bridge0: link state changed to DOWN epair0a: link state changed to DOWN carp: 1@epair0b: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0b: promiscuous mode disabled epair1a: link state changed to DOWN carp: 1@epair1b: BACKUP -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair1b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair1b: promiscuous mode disabled passed [6.474s] sys/netinet/carp.py:TestCarp::test_source_mac -> epair0a: Ethernet addres= s: 02:73:8c:1b:4d:0a epair0b: Ethernet address: 02:73:8c:1b:4d:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: promiscuous mode enabled carp: 1@epair0a: INIT -> BACKUP (initialization complete) carp: 1@epair0a: BACKUP -> MASTER (master timed out) carp: 1@epair0a: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0a: link state changed to DOWN epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0a: promiscuous mode disabled passed [4.449s] sys/netinet/carp.py:TestCarp::test_source_mac_vrrp -> epair0a: Ethernet a= ddress: 02:cc:63:85:56:0a epair0b: Ethernet address: 02:cc:63:85:56:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: promiscuous mode enabled carp: 1@epair0a: INIT -> BACKUP (initialization complete) carp: 1@epair0a: BACKUP -> MASTER (master timed out) carp: 1@epair0a: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0a: link state changed to DOWN epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0a: promiscuous mode disabled passed [4.968s] sys/netinet/divert:ipdivert_ip_input_local_success -> epair0a: Ethernet a= ddress: 02:00:4f:b7:00:0a epair0b: Ethernet address: 02:00:4f:b7:00:0b epair0a: link state changed to UP epair0b: link state changed to UP tun0: loop detected epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [1.100s] sys/netinet/divert:ipdivert_ip_output_remote_success -> epair0a: Ethernet= address: 02:33:47:c6:00:0a epair0b: Ethernet address: 02:33:47:c6:00:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [1.121s] sys/netinet/fibs:fibs_ifroutes1_success -> epair0a: Ethernet address: 02:= e1:8a:ac:92:0a epair0b: Ethernet address: 02:e1:8a:ac:92:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.130s] sys/netinet/fibs_test:arpresolve_checks_interface_fib -> skipped: firewal= ls interfere with this test [0.033s] sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet -> = tap0: Ethernet address: 58:9c:fc:10:e4:44 tap1: Ethernet address: 58:9c:fc:10:86:1d passed [0.063s] sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6= -> tap0: Ethernet address: 58:9c:fc:10:e4:44 tap1: Ethernet address: 58:9c:fc:10:86:1d passed [0.065s] sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib -> ta= p0: Ethernet address: 58:9c:fc:10:e4:44 passed [0.054s] sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6 = -> tap0: Ethernet address: 58:9c:fc:10:e4:44 passed [0.049s] sys/netinet/fibs_test:same_ip_multiple_ifaces -> tap0: Ethernet address: = 58:9c:fc:10:e4:44 tap1: Ethernet address: 58:9c:fc:10:86:1d tap2: Ethernet address: 58:9c:fc:10:8e:28 tap3: Ethernet address: 58:9c:fc:10:ff:a2 expected_failure: kern/189088 Assigning the same IP to multiple interfaces = in different FIBs creates a host route for only one: atf-check failed; see = the output of the test for details [0.061s] sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0 -> tap0: Ethernet addr= ess: 58:9c:fc:10:e4:44 tap1: Ethernet address: 58:9c:fc:10:86:1d tap2: Ethernet address: 58:9c:fc:10:8e:28 tap3: Ethernet address: 58:9c:fc:10:ff:a2 passed [0.053s] sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6 -> tap0: Ethernet add= ress: 58:9c:fc:10:e4:44 tap1: Ethernet address: 58:9c:fc:10:86:1d tap0: Ethernet address: 58:9c:fc:10:e4:44 tap1: Ethernet address: 58:9c:fc:10:86:1d passed [0.101s] sys/netinet/fibs_test:slaac_on_nondefault_fib6 -> skipped: firewalls inte= rfere with this test [0.035s] sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet -> t= ap0: Ethernet address: 58:9c:fc:10:e4:44 Fatal trap 9: general protection fault while in kernel mode cpuid =3D 0; apic id =3D 00 instruction pointer=09=3D 0x20:0xffffffff82912fa4 stack pointer=09 =3D 0x28:0xfffffe008e73c850 frame pointer=09 =3D 0x28:0xfffffe008e73c8c0 code segment=09=09=3D base 0x0, limit 0xfffff, type 0x1b =09=09=09=3D DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags=09=3D interrupt enabled, resume, IOPL =3D 0 current process=09=09=3D 0 (netlink_socket (PID) rdi: 00000000b67cd780 rsi: fffff800b6143c00 rdx: 0000000000000013 rcx: fffffe008c986500 r8: fffff800b67cdfd8 r9: 0000000000000fd8 rax: deadc0dedeadc0de rbx: 0000000000000000 rbp: fffffe008e73c8c0 r10: 0000000000000000 r11: 0000000000000004 r12: fffff80116543810 r13: fffff800b67cd780 r14: fffff8014ffb0e80 r15: fffff800030c19c0 trap number=09=09=3D 9 panic: general protection fault cpuid =3D 0 time =3D 1727125692 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008e73c= 590 vpanic() at vpanic+0x13f/frame 0xfffffe008e73c6c0 panic() at panic+0x43/frame 0xfffffe008e73c720 trap_fatal() at trap_fatal+0x40b/frame 0xfffffe008e73c780 calltrap() at calltrap+0x8/frame 0xfffffe008e73c780 --- trap 0x9, rip =3D 0xffffffff82912fa4, rsp =3D 0xfffffe008e73c850, rbp = =3D 0xfffffe008e73c8c0 --- sctp_add_addr_to_vrf() at sctp_add_addr_to_vrf+0x454/frame 0xfffffe008e73c8= c0 sctp_addr_change() at sctp_addr_change+0xde/frame 0xfffffe008e73c910 rt_addrmsg() at rt_addrmsg+0x121/frame 0xfffffe008e73c9e0 in_addprefix() at in_addprefix+0x157/frame 0xfffffe008e73ca30 in_control_ioctl() at in_control_ioctl+0xadb/frame 0xfffffe008e73cad0 rtnl_handle_addr() at rtnl_handle_addr+0x40b/frame 0xfffffe008e73ccd0 rtnl_handle_message() at rtnl_handle_message+0x195/frame 0xfffffe008e73cd30 nl_taskqueue_handler() at nl_taskqueue_handler+0x588/frame 0xfffffe008e73ce= 40 taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008e73ce= c0 taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008e73c= ef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008e73cf30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008e73cf30 --- trap 0xe9a96220, rip =3D 0x2886e9a96b60, rsp =3D 0x2886e9a96f10, rbp = =3D 0 --- KDB: enter: panic [ thread pid 0 tid 102464 ] Stopped at kdb_enter+0x33: movq $0,0x10581e2(%rip) db:0:kdb.enter.panic> show pcpu cpuid =3D 0 dynamic pcpu =3D 0x9f6e00 curthread =3D 0xfffff801a56f8740: pid 0 tid 102464 critnest 1 "netlink_s= ocket (PID" curpcb =3D 0xfffff801a56f8c60 fpcurthread =3D none idlethread =3D 0xfffff80102609740: tid 100003 "idle: cpu0" self =3D 0xffffffff82410000 curpmap =3D 0xffffffff81b9be10 tssp =3D 0xffffffff82410384 rsp0 =3D 0xfffffe008e73d000 kcr3 =3D 0x800000000238c002 ucr3 =3D 0xffffffffffffffff scr3 =3D 0xb3490c4e gs32p =3D 0xffffffff82410404 ldt =3D 0xffffffff82410444 tss =3D 0xffffffff82410434 curvnet =3D 0xfffff8000322d040 spin locks held: db:0:kdb.enter.panic> reset Uptime: 18m8s + rc=3D0 + echo 'bhyve return code =3D 0' bhyve return code =3D 0 + sudo /usr/sbin/bhyvectl '--vm=3Dtestvm-main-amd64-25549' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=3Dmeta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-notyet-tests.sh x ./run-kyua.sh x ./disable-dtrace-tests.sh x ./disable-zfs-tests.sh x ./auto-shutdown x ./run.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or direc= tory + report=3Dtest-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report= .xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins4950249614017406933.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '0a7e5f1f02aad= 2ff5fff1c60f44c6975fd07e1d9', 'branch': 'main', 'target': 'amd64', 'target_= arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../0a7e5f1f02aad2ff5fff= 1c60f44c6975fd07e1d9/amd64/amd64\n" Recording test results ERROR: Step =E2=80=98Publish JUnit test result report=E2=80=99 failed: No t= est report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail address ------=_Part_7842_759310733.1727125693641--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1118512593.7843.1727125694102>