Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 6 Apr 2015 00:18:19 +0300
From:      Lev Serebryakov <lev@FreeBSD.org>
To:        freebsd-wireless@freebsd.org
Subject:   wpi problems with latest CURRENT: my old laptop air-gapped :)
Message-ID:  <1121070252.20150406001819@serebryakov.spb.ru>

next in thread | raw e-mail | index | archive | help
Hello Freebsd-wireless,


 I have old Sony Vaio with wpi WiFi card:

wpi0@pci0:6:0:0:        class=0x028000 card=0x10508086 chip=0x42228086 rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'PRO/Wireless 3945ABG [Golan] Network Connection'
    class      = network


 It worked with -CURRENT from ~ Nov 2014 (it complained about callbacks, but
worked rather well!) but after update to r281061, it stops to work.

 Driver (and wpa_supplicant!) complains to console several times per second:

...
Apr  6 00:00:13 labrat kernel: wpi0: wpi_send_rxon: could not set TX power, error 35
Apr  6 00:00:13 labrat kernel: wpi0: wpi_config: could not send RXON
Apr  6 00:00:13 labrat kernel: wpi0: wpi_init: could not configure device, error 35
Apr  6 00:00:13 labrat kernel: wpi0: could not add broadcast node, error 35
Apr  6 00:00:13 labrat kernel: wpi0: wpi_config: could not send RXON
Apr  6 00:00:13 labrat kernel: wpi0: wpi_init: could not configure device, error 35
Apr  6 00:00:13 labrat kernel: wpi0: fatal firmware error
Apr  6 00:00:13 labrat kernel: firmware error log (count = 1):
Apr  6 00:00:13 labrat kernel: error type = "SYSASSERT" (0x00000005)
Apr  6 00:00:13 labrat kernel: error data      = 0x000004F3
Apr  6 00:00:13 labrat kernel: branch link     = 0x000008B600001F8A
Apr  6 00:00:13 labrat kernel: interrupt link  = 0x0000032000000000
Apr  6 00:00:13 labrat kernel: time            = 107
Apr  6 00:00:13 labrat kernel: driver status:
Apr  6 00:00:13 labrat kernel: tx ring  0: qid=0  cur=0   queued=0  
Apr  6 00:00:13 labrat kernel: tx ring  1: qid=1  cur=0   queued=0  
Apr  6 00:00:13 labrat kernel: tx ring  2: qid=2  cur=0   queued=0  
Apr  6 00:00:13 labrat kernel: tx ring  3: qid=3  cur=0   queued=0  
Apr  6 00:00:13 labrat kernel: tx ring  4: qid=4  cur=10  queued=0  
Apr  6 00:00:13 labrat kernel: rx ring: cur=10
Apr  6 00:00:13 labrat wpa_supplicant[1186]: ioctl[SIOCS80211, op=103, val=0, arg_len=128]: Device not configured
Apr  6 00:00:13 labrat wpa_supplicant[1186]: wlan0: Failed to initiate AP scan
Apr  6 00:00:14 labrat kernel: wpi0: wpi_send_rxon: could not set TX power, error 35
...

  This laptop is really old (SATA1 disk, first-gen Core2Duo CPU, 2GB of RAM)
 so re-building system takes hours :(

  But I could provide additional debug information.

-- 
Best regards,
 Lev                          mailto:lev@FreeBSD.org




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1121070252.20150406001819>