Date: Sat, 22 Oct 2005 12:55:08 +0300 From: Yousef Raffah <yraffah@savola.com> To: acpi@freebsd.org Subject: Re: ACPI Problem With Toshiba Tecra A4 Message-ID: <1129974909.817.22.camel@RedDevil.savola.com> In-Reply-To: <4341A8FE.1020502@root.org> References: <1128373723.12875.1.camel@RedDevil.savola.com> <4341A8FE.1020502@root.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --] On Mon, 2005-10-03 at 14:56 -0700, Nate Lawson wrote: > Yousef Raffah wrote: > > Hello Everyone, > > > > I've been struggling a lot with acpi but still can't figure out how to > > have it working properly with FreeBSD > > > > I just updated my BIOS to the latest version available from toshiba and > > tested it with FreeBSD 6, but still with no luck :( > > > > Now if I enable > > acpi_load="YES" > > in /boot/loader.conf, I can't boot my FreeBSD as the hard disk ad0 > > doesn't get recognized during boot and the system stops asking me to > > select the root partition! Which is not available of course. > > > > I'm not sure if I can attache my asl file and send it to the list but I > > have it ready though if someone is willing to look at it. > > This part is probably the issue: > > atapci0: <Intel ICH6 SATA150 controller> port > > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1100-0x110f at device 31.2 on pci0 > > atapci0: failed to enable memory mapping! > > Try booting with: > debug.acpi.disabled="sysres" > I'm sorry I didn't check your message earlier... Just a quick question, should I enable acpi_load="YES" in /boot/loader.conf and add this line as well in the same file? [-- Attachment #2 --] -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.2 (FreeBSD) iD8DBQBDWgx89KbelRb+qmwRAkCMAKDChkEcRlub0r6Gl9nT++IUoo0eAQCaAjX0 BiHN1r6WKwz/T4GZxsCxjbo= =ESXR -----END PGP SIGNATURE-----
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1129974909.817.22.camel>