Date: Sun, 14 Jun 2009 17:28:47 -0500 From: Robert Noland <rnoland@FreeBSD.org> To: Andriy Bakay <andriy@irbisnet.com> Cc: freebsd-x11@freebsd.org Subject: Re: External monitor is blank with nouveau driver Message-ID: <1245018527.3132.3200.camel@balrog.2hip.net> In-Reply-To: <4A352596.60907@irbisnet.com> References: <4A345C77.30600@irbisnet.com> <1244983031.3132.2603.camel@balrog.2hip.net> <4A352596.60907@irbisnet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
--=-lrczqwEiyr6DfRddnBEB Content-Type: text/plain Content-Transfer-Encoding: quoted-printable On Sun, 2009-06-14 at 12:30 -0400, Andriy Bakay wrote: > I will remove "1440x900" mode from config and try it out. >=20 > I have not used yet your kernel patch. >=20 > What is DDX driver? The DDX driver is the 2d driver, (xf86-video-nouveau, etc...) robert. > Robert Noland wrote: > > On Sat, 2009-06-13 at 22:12 -0400, Andriy Bakay wrote: > >> Hi Robert, > >> > >> I have the following hardware/software spec: > >> > >> ThinkPad T61 > >> FreeBSD 7.1-RELEASE-p5 amd64 > >> NVIDIA Quadro NVS 140M > >> X driver nouveau > >> External monitor NEC MultiSync 90GX2 > >> > >> I am connecting external monitor through VGA interface. I was able to > >> detect it using command 'xrandr -q' and even turn it on: > >> > >> $ xrandr --output VGA-0 --auto --below LVDS-0 > >> > >> the geometry of my desktop changed, but monitor remain blank. > >> > >> Please, advise. > >=20 > > The config looks good. The only thing that I notice is that you specif= y > > Modes "1440x900" which may be limiting the usable modes. I would remov= e > > that and just let xrandr dtrt. I haven't actually tried dual head with > > the nouveau driver, though it should work. Your Virtual entry appears > > to be sized reasonably to enable the second display. > >=20 > > Are you using my kernel patch? It shouldn't be relevant to your issue, > > just curious. This is going to be an issue with the DDX driver, if it > > still won't work. > >=20 > > robert. > >=20 > >> Thanks, > >> Andriy > >> > >> plain text document attachment (xorg.conf) > >> Section "ServerLayout" > >> Identifier "X.org Configured" > >> Screen 0 "Screen0" 0 0 > >> InputDevice "Synaptics_Touchpad" "CorePointer" > >> InputDevice "Keyboard0" "CoreKeyboard" > >> Option "DontZap" "Off" > >> Option "AIGLX" "true" > >> EndSection > >> > >> Section "Extensions" > >> Option "Composite" "Enable" > >> Option "XVideo" "Enable" > >> EndSection > >> > >> Section "Files" > >> ModulePath "/usr/local/lib/xorg/modules" > >> FontPath "/usr/local/lib/X11/fonts/misc/" > >> FontPath "/usr/local/lib/X11/fonts/TTF/" > >> FontPath "/usr/local/lib/X11/fonts/OTF" > >> FontPath "/usr/local/lib/X11/fonts/Type1/" > >> FontPath "/usr/local/lib/X11/fonts/100dpi/" > >> FontPath "/usr/local/lib/X11/fonts/75dpi/" > >> FontPath "/usr/local/lib/X11/fonts/URW/" > >> FontPath "/usr/local/lib/X11/fonts/freefont/" > >> FontPath "/usr/local/lib/X11/fonts/TrueType/" > >> FontPath "/usr/local/lib/X11/fonts/bitstream-vera/" > >> FontPath "/usr/local/lib/X11/fonts/cyrillic/" > >> FontPath "/usr/local/lib/X11/fonts/dejavu/" > >> EndSection > >> > >> Section "Module" > >> Load "extmod" > >> Load "record" > >> Load "dbe" > >> Load "glx" > >> Load "dri" > >> Load "dri2" > >> Load "synaptics" > >> EndSection > >> > >> Section "InputDevice" > >> Identifier "Keyboard0" > >> Driver "kbd" > >> EndSection > >> > >> #Section "InputDevice" > >> # Identifier "Mouse0" > >> # Driver "mouse" > >> # Option "Protocol" "auto" > >> # Option "Device" "/dev/sysmouse" > >> # Option "ZAxisMapping" "4 5 6 7" > >> #EndSection > >> > >> Section "InputDevice" > >> Identifier "Synaptics_Touchpad" > >> Driver "synaptics" > >> > >> Option "Device" "/dev/psm0" > >> Option "Protocol" "psm" > >> > >> Option "LeftEdge" "1400" > >> Option "RightEdge" "5600" > >> Option "TopEdge" "1400" > >> Option "BottomEdge" "4700" > >> > >> Option "FingerLow" "25" > >> Option "FingerHigh" "30" > >> > >> Option "MaxTapTime" "180" > >> Option "MaxTapMove" "220" > >> > >> Option "VertScrollDelta" "100" > >> Option "HorizScrollDelta" "100" > >> > >> Option "MinSpeed" "0.25" > >> Option "MaxSpeed" "0.5" > >> Option "AccelFactor" "0.0010" > >> Option "FastTaps" "off" > >> > >> Option "ScrollButtonRepeat" "100" > >> Option "UpDownScrolling" "on" > >> Option "UpDownRepeat" "on" > >> Option "LeftRightScrolling" "on" > >> Option "LeftRightRepeat" "on" > >> > >> Option "TapButton1" "0" > >> Option "TapButton2" "0" > >> Option "TapButton3" "0" > >> > >> # "SHMConfig on" seems good works with synclient(1). But this > >> # options is insecure. I recommended "off" as default. > >> Option "SHMConfig" "on" > >> > >> # If you use circular touchpad, uncomment them. > >> #Option "CircularPad" "on" > >> #Option "CircularScrolling" "on" > >> #Option "CircScrollDelta" "0.5" > >> EndSection > >> > >> Section "Monitor" > >> Identifier "LVDS-0" > >> Option "DPMS" > >> EndSection > >> > >> Section "Monitor" > >> Identifier "VGA-0" > >> Option "DPMS" > >> EndSection > >> > >> Section "Device" > >> ### Available Driver options are:- > >> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", > >> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz" > >> ### [arg]: arg optional > >> #Option "SWcursor" # [<bool>] > >> #Option "HWcursor" # [<bool>] > >> #Option "NoAccel" # [<bool>] > >> #Option "ShadowFB" # [<bool>] > >> #Option "UseFBDev" # [<bool>] > >> #Option "Rotate" # [<str>] > >> #Option "VideoKey" # <i> > >> #Option "FlatPanel" # [<bool>] > >> #Option "FPDither" # [<bool>] > >> #Option "CrtcNumber" # <i> > >> #Option "FPScale" # [<bool>] > >> #Option "FPTweak" # <i> > >> #Option "DualHead" # [<bool>] > >> Option "UseEdidDpi" "false" > >> Option "DPI" "96 x 96" > >> Identifier "Card0" > >> Driver "nouveau" > >> VendorName "nVidia Corporation" > >> BoardName "Quadro NVS 140M" > >> BusID "PCI:1:0:0" > >> Option "AccelMethod" "EXA" > >> Option "EXANoComposite" "false" > >> Option "FBTexPercent" "50" > >> Option "MigrationHeuristic" "greedy" > >> Option "DRI" "true > >> Option "Monitor-LVDS" "LVDS-0" > >> Option "Monitor-VGA" "VGA-0" > >> EndSection > >> > >> Section "DRI" > >> Mode 0666 > >> EndSection > >> > >> Section "Screen" > >> Identifier "Screen0" > >> Device "Card0" > >> SubSection "Display" > >> Viewport 0 0 > >> Depth 1 > >> EndSubSection > >> SubSection "Display" > >> Viewport 0 0 > >> Depth 4 > >> EndSubSection > >> SubSection "Display" > >> Viewport 0 0 > >> Depth 8 > >> EndSubSection > >> SubSection "Display" > >> Viewport 0 0 > >> Depth 15 > >> EndSubSection > >> SubSection "Display" > >> Viewport 0 0 > >> Depth 16 > >> EndSubSection > >> SubSection "Display" > >> Viewport 0 0 > >> Depth 24 > >> Modes "1440x900" > >> Virtual 2048 2048 > >> EndSubSection > >> EndSection > >> --=20 Robert Noland <rnoland@FreeBSD.org> FreeBSD --=-lrczqwEiyr6DfRddnBEB Content-Type: application/pgp-signature; name="signature.asc" Content-Description: This is a digitally signed message part -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.11 (FreeBSD) iEYEABECAAYFAko1eZ8ACgkQM4TrQ4qfROPgOwCfWBhsmAcRUtL64qoT7apsTcD8 6xAAn1oEbVjr/kQ5xWNsiIyOPTqcuMO4 =eQ8E -----END PGP SIGNATURE----- --=-lrczqwEiyr6DfRddnBEB--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1245018527.3132.3200.camel>