Date: Tue, 4 Jun 2013 10:54:30 +0200 (CEST) From: "Pascal Braun, Continum" <pascal.braun@continum.net> To: Ronald Klop <ronald-freebsd8@klop.yi.org> Cc: freebsd-stable@freebsd.org Subject: Re: ZFS crashing while zfs recv in progress Message-ID: <1261869099.176558.1370336069971.JavaMail.root@continum.net> In-Reply-To: <op.wxubdcpd8527sy@ronaldradial.versatec.local>
next in thread | previous in thread | raw e-mail | index | archive | help
[-- Attachment #1 --]
I've put swap on a seperate disk this time and re-run the zfs send / recv, but i'm still getting the problem. Whats interesting is, i'm still getting the same output about swap space on the console:
swap_pager: indefinite wait buffer: bufobj: 0, blkno: 36, size: 24576
The System is running from zroot and i'm trying to transfer to tank. zpool Status output:
---
pool: tank
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
tank ONLINE 0 0 0
raidz2-0 ONLINE 0 0 0
gpt/disk3 ONLINE 0 0 0
gpt/disk9 ONLINE 0 0 0
gpt/disk15 ONLINE 0 0 0
gpt/disk19 ONLINE 0 0 0
gpt/disk23 ONLINE 0 0 0
gpt/disk27 ONLINE 0 0 0
gpt/disk31 ONLINE 0 0 0
gpt/disk36 ONLINE 0 0 0
gpt/disk33 ONLINE 0 0 0
raidz2-1 ONLINE 0 0 0
gpt/disk1 ONLINE 0 0 0
gpt/disk4 ONLINE 0 0 0
gpt/disk7 ONLINE 0 0 0
gpt/disk10 ONLINE 0 0 0
gpt/disk13 ONLINE 0 0 0
gpt/disk16 ONLINE 0 0 0
gpt/disk24 ONLINE 0 0 0
gpt/disk32 ONLINE 0 0 0
gpt/disk37 ONLINE 0 0 0
raidz2-2 ONLINE 0 0 0
gpt/disk2 ONLINE 0 0 0
gpt/disk5 ONLINE 0 0 0
gpt/disk8 ONLINE 0 0 0
gpt/disk11 ONLINE 0 0 0
gpt/disk17 ONLINE 0 0 0
gpt/disk21 ONLINE 0 0 0
gpt/disk25 ONLINE 0 0 0
gpt/disk29 ONLINE 0 0 0
gpt/disk38 ONLINE 0 0 0
raidz2-3 ONLINE 0 0 0
gpt/disk12 ONLINE 0 0 0
gpt/disk14 ONLINE 0 0 0
gpt/disk18 ONLINE 0 0 0
gpt/disk22 ONLINE 0 0 0
gpt/disk26 ONLINE 0 0 0
gpt/disk30 ONLINE 0 0 0
gpt/disk34 ONLINE 0 0 0
gpt/disk35 ONLINE 0 0 0
gpt/disk39 ONLINE 0 0 0
spares
gpt/disk20 AVAIL
errors: No known data errors
pool: zroot
state: ONLINE
scan: none requested
config:
NAME STATE READ WRITE CKSUM
zroot ONLINE 0 0 0
mirror-0 ONLINE 0 0 0
gpt/disk0 ONLINE 0 0 0
gpt/disk6 ONLINE 0 0 0
errors: No known data errors
---
Attatched you'll also find the dmesg.boot.
thanks,
Pascal
----- Ursprüngliche Mail -----
> On Wed, 29 May 2013 11:04:00 +0200, Pascal Braun, Continum
>
> Please send more information about the new server. Sometimes there
> are
> bugs found in drivers with large disks, etc. Or firmware of hardware.
> The contents of /var/run/dmesg.boot is interesting to a lot of
> people.
> As is the output of zpool status.
>
> As you are having trouble with swap on zfs. Is it possible to put
> that on
> a separate disk for the test?
>
> Ronald.
> _______________________________________________
> freebsd-stable@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-stable
> To unsubscribe, send any mail to
> "freebsd-stable-unsubscribe@freebsd.org"
>
[-- Attachment #2 --]
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-RELEASE #0 r243825: Tue Dec 4 09:23:10 UTC 2012
root@farrell.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC amd64
CPU: Quad-Core AMD Opteron(tm) Processor 2356 (2300.14-MHz K8-class CPU)
Origin = "AuthenticAMD" Id = 0x100f23 Family = 10 Model = 2 Stepping = 3
Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=0x802009<SSE3,MON,CX16,POPCNT>
AMD Features=0xee500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=0x7ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS>
TSC: P-state invariant
real memory = 17179869184 (16384 MB)
avail memory = 16522600448 (15757 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <SUN X4540 >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 2 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
cpu4 (AP): APIC ID: 4
cpu5 (AP): APIC ID: 5
cpu6 (AP): APIC ID: 6
cpu7 (AP): APIC ID: 7
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-47 on motherboard
ioapic2 <Version 1.1> irqs 48-71 on motherboard
kbd1 at kbdmux0
module_register_init: MOD_LOAD (vesa, 0xffffffff80bf5510, 0) error 19
acpi0: <SUN X4540> on motherboard
acpi0: Power Button (fixed)
unknown: I/O range not supported
acpi0: reservation of fec00000, 1000 (3) failed
acpi0: reservation of fee00000, 1000 (3) failed
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, ddf00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed00fff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe008-0xe00b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> port 0xef00-0xef7f at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <nVidia nForce MCP55 USB Controller> mem 0xde7ff000-0xde7fffff irq 21 at device 2.0 on pci0
usbus0 on ohci0
ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xde7fec00-0xde7fecff irq 22 at device 2.1 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci0
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xac00-0xac7f mem 0xde800000-0xdeffffff,0xdf3e0000-0xdf3fffff irq 16 at device 5.0 on pci1
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0x9480-0x9487 mem 0xde7fd000-0xde7fdfff,0xde7fe800-0xde7fe8ff,0xde7fe400-0xde7fe40f irq 23 at device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 2 on miibus0
e1000phy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe0: Ethernet address: 00:14:4f:f2:c6:e8
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0x9400-0x9407 mem 0xde7fc000-0xde7fcfff,0xde7fe000-0xde7fe0ff,0xde7f7c00-0xde7f7c0f irq 20 at device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 3 on miibus1
e1000phy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe1: Ethernet address: 00:14:4f:f2:c6:e9
pcib2: <ACPI PCI-PCI bridge> at device 10.0 on pci0
pci2: <ACPI PCI bus> on pcib2
mpt0: <LSILogic SAS/SATA Adapter> port 0xb800-0xb8ff mem 0xdf7fc000-0xdf7fffff,0xdf7e0000-0xdf7effff irq 17 at device 0.0 on pci2
mpt0: MPI Version=1.5.20.0
pcib3: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pci3: <ACPI PCI bus> on pcib3
mpt1: <LSILogic SAS/SATA Adapter> port 0xc800-0xc8ff mem 0xdfbfc000-0xdfbfffff,0xdfbe0000-0xdfbeffff irq 18 at device 0.0 on pci3
mpt1: MPI Version=1.5.20.0
pcib4: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci4: <ACPI PCI bus> on pcib4
mpt2: <LSILogic SAS/SATA Adapter> port 0xd800-0xd8ff mem 0xdfffc000-0xdfffffff,0xdffe0000-0xdffeffff irq 18 at device 0.0 on pci4
mpt2: MPI Version=1.5.20.0
pcib5: <ACPI Host-PCI bridge> on acpi0
pci64: <ACPI PCI bus> on pcib5
pci64: <memory, RAM> at device 0.0 (no driver attached)
pci64: <memory, RAM> at device 1.0 (no driver attached)
pci64: <serial bus, SMBus> at device 1.1 (no driver attached)
nfe2: <NVIDIA nForce MCP55 Networking Adapter> port 0x5400-0x5407 mem 0xdd3fe000-0xdd3fefff,0xdd3fdc00-0xdd3fdcff,0xdd3fd800-0xdd3fd80f irq 45 at device 8.0 on pci64
miibus2: <MII bus> on nfe2
e1000phy2: <Marvell 88E1149 Gigabit PHY> PHY 2 on miibus2
e1000phy2: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe2: Ethernet address: 00:14:4f:f2:c6:ea
nfe3: <NVIDIA nForce MCP55 Networking Adapter> port 0x5080-0x5087 mem 0xdd3fc000-0xdd3fcfff,0xdd3fd400-0xdd3fd4ff,0xdd3fd000-0xdd3fd00f irq 46 at device 9.0 on pci64
miibus3: <MII bus> on nfe3
e1000phy3: <Marvell 88E1149 Gigabit PHY> PHY 3 on miibus3
e1000phy3: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe3: Ethernet address: 00:14:4f:f2:c6:eb
pcib6: <ACPI PCI-PCI bridge> at device 10.0 on pci64
pci65: <ACPI PCI bus> on pcib6
mpt3: <LSILogic SAS/SATA Adapter> port 0x6800-0x68ff mem 0xdd7fc000-0xdd7fffff,0xdd7e0000-0xdd7effff irq 40 at device 0.0 on pci65
mpt3: MPI Version=1.5.20.0
pcib7: <ACPI PCI-PCI bridge> at device 11.0 on pci64
pci66: <ACPI PCI bus> on pcib7
mpt4: <LSILogic SAS/SATA Adapter> port 0x7800-0x78ff mem 0xddbfc000-0xddbfffff,0xddbe0000-0xddbeffff irq 41 at device 0.0 on pci66
mpt4: MPI Version=1.5.20.0
pcib8: <ACPI PCI-PCI bridge> at device 15.0 on pci64
pci67: <ACPI PCI bus> on pcib8
mpt5: <LSILogic SAS/SATA Adapter> port 0x8800-0x88ff mem 0xddffc000-0xddffffff,0xddfe0000-0xddfeffff irq 41 at device 0.0 on pci67
mpt5: MPI Version=1.5.20.0
pcib9: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib9
pci128: <memory, RAM> at device 0.0 (no driver attached)
pci128: <memory, RAM> at device 1.0 (no driver attached)
pci128: <serial bus, SMBus> at device 1.1 (no driver attached)
pcib10: <ACPI PCI-PCI bridge> at device 10.0 on pci128
pci129: <ACPI PCI bus> on pcib10
pcib11: <ACPI PCI-PCI bridge> at device 11.0 on pci128
pci130: <ACPI PCI bus> on pcib11
pcib12: <ACPI PCI-PCI bridge> at device 15.0 on pci128
pci131: <ACPI PCI bus> on pcib12
bce0: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem 0xda000000-0xdbffffff irq 64 at device 0.0 on pci131
miibus4: <MII bus> on bce0
brgphy0: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus4
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce0: Ethernet address: 44:1e:a1:56:88:74
bce0: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI)
Coal (RX:6,6,18,18; TX:20,20,80,80)
bce1: <HP NC382T PCIe DP Multifunction Gigabit Server Adapter (C0)> mem 0xd8000000-0xd9ffffff irq 65 at device 0.1 on pci131
miibus5: <MII bus> on bce1
brgphy1: <BCM5709 10/100/1000baseT PHY> PHY 1 on miibus5
brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
bce1: Ethernet address: 44:1e:a1:56:88:76
bce1: ASIC (0x57092003); Rev (C0); Bus (PCIe x4, 2.5Gbps); B/C (5.2.2); Bufs (RX:2;TX:2;PG:8); Flags (SPLT|MSI)
Coal (RX:6,6,18,18; TX:20,20,80,80)
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: console (9600,n,8,1)
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcf7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: CGA <16 virtual consoles, flags=0x100>
vga0: <Generic ISA VGA> at port 0x3d0-0x3db iomem 0xb8000-0xbffff on isa0
ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
da0 at mpt0 bus 0 scbus0 target 0 lun 0
da0: <ATA Hitachi HDS72101 A3MA> Fixed Direct Access SCSI-5 device
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da6 at mpt1 bus 0 scbus1 target 0 lun 0
da6: <ATA Hitachi HDS72101 A3MA> Fixed Direct Access SCSI-5 device
da6: 300.000MB/s transfers
da6: Command Queueing enabled
da6: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
da7 at mpt1 bus 0 scbus1 target 1 lun 0
da7: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da7: 300.000MB/s transfers
da7: Command Queueing enabled
da7: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da8 at mpt1 bus 0 scbus1 target 2 lun 0
da8: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da8: 300.000MB/s transfers
da8: Command Queueing enabled
da8: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da1 at mpt0 bus 0 scbus0 target 1 lun 0
da1: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mpt0 bus 0 scbus0 target 2 lun 0
da2: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da2: 300.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at mpt0 bus 0 scbus0 target 4 lun 0
da3: <ATA Hitachi HDS5C302 A580> Fixed Direct Access SCSI-5 device
da3: 300.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da13 at mpt2 bus 0 scbus2 target 1 lun 0
da13: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da13: 300.000MB/s transfers
da13: Command Queueing enabled
da13: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da14 at mpt2 bus 0 scbus2 target 3 lun 0
da14: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da14: 300.000MB/s transfers
da14: Command Queueing enabled
da14: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da15 at mpt2 bus 0 scbus2 target 4 lun 0
da15: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da15: 300.000MB/s transfers
da15: Command Queueing enabled
da15: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da16 at mpt2 bus 0 scbus2 target 5 lun 0
da16: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da16: 300.000MB/s transfers
da16: Command Queueing enabled
da16: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da9 at mpt1 bus 0 scbus1 target 4 lun 0
da9: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da9: 300.000MB/s transfers
da9: Command Queueing enabled
da9: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da10 at mpt1 bus 0 scbus1 target 5 lun 0
da10: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da10: 300.000MB/s transfers
da10: Command Queueing enabled
da10: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da11 at mpt1 bus 0 scbus1 target 6 lun 0
da11: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da11: 300.000MB/s transfers
da11: Command Queueing enabled
da11: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da12 at mpt1 bus 0 scbus1 target 7 lun 0
da12: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da12: 300.000MB/s transfers
da12: Command Queueing enabled
da12: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da4 at mpt0 bus 0 scbus0 target 5 lun 0
da4: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da4: 300.000MB/s transfers
da4: Command Queueing enabled
da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mpt0 bus 0 scbus0 target 6 lun 0
da5: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da5: 300.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
uhub1: 10 ports with 10 removable, self powered
da17 at mpt2 bus 0 scbus2 target 6 lun 0
da17: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da17: 300.000MB/s transfers
da17: Command Queueing enabled
da17: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da19 at mpt3 bus 0 scbus3 target 0 lun 0
da19: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da19: 300.000MB/s transfers
da19: Command Queueing enabled
da19: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da20 at mpt3 bus 0 scbus3 target 1 lun 0
da20: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da20: 300.000MB/s transfers
da20: Command Queueing enabled
da20: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da18 at mpt2 bus 0 scbus2 target 7 lun 0
da18: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da18: 300.000MB/s transfers
da18: Command Queueing enabled
da18: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da21 at mpt3 bus 0 scbus3 target 2 lun 0
da21: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da21: 300.000MB/s transfers
da21: Command Queueing enabled
da21: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da22 at mpt3 bus 0 scbus3 target 3 lun 0
da22: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da22: 300.000MB/s transfers
da22: Command Queueing enabled
da22: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da23 at mpt3 bus 0 scbus3 target 4 lun 0
da23: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da23: 300.000MB/s transfers
da23: Command Queueing enabled
da23: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da24 at mpt3 bus 0 scbus3 target 5 lun 0
da24: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da24: 300.000MB/s transfers
da24: Command Queueing enabled
da24: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da25 at mpt3 bus 0 scbus3 target 6 lun 0
da25: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da25: 300.000MB/s transfers
da25: Command Queueing enabled
da25: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da26 at mpt3 bus 0 scbus3 target 7 lun 0
da26: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da26: 300.000MB/s transfers
da26: Command Queueing enabled
da26: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da27 at mpt4 bus 0 scbus4 target 0 lun 0
da27: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da27: 300.000MB/s transfers
da27: Command Queueing enabled
da27: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da34 at mpt5 bus 0 scbus5 target 3 lun 0
da34: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da34: 300.000MB/s transfers
da34: Command Queueing enabled
da34: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da35 at mpt5 bus 0 scbus5 target 4 lun 0
da35: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da35: 300.000MB/s transfers
da35: Command Queueing enabled
da35: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da28 at mpt4 bus 0 scbus4 target 2 lun 0
da28: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da28: 300.000MB/s transfers
da28: Command Queueing enabled
da28: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da29 at mpt4 bus 0 scbus4 target 3 lun 0
da29: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da29: 300.000MB/s transfers
da29: Command Queueing enabled
da29: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da30 at mpt4 bus 0 scbus4 target 4 lun 0
da30: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da30: 300.000MB/s transfers
da30: Command Queueing enabled
da30: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da36 at mpt5 bus 0 scbus5 target 5 lun 0
da36: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da36: 300.000MB/s transfers
da36: Command Queueing enabled
da36: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da37 at mpt5 bus 0 scbus5 target 6 lun 0
da37: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da37: 300.000MB/s transfers
da37: Command Queueing enabled
da37: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da38 at mpt5 bus 0 scbus5 target 7 lun 0
da38: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da38: 300.000MB/s transfers
da38: Command Queueing enabled
da38: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da31 at mpt4 bus 0 scbus4 target 5 lun 0
da31: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da31: 300.000MB/s transfers
da31: Command Queueing enabled
da31: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da32 at mpt4 bus 0 scbus4 target 6 lun 0
da32: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da32: 300.000MB/s transfers
da32: Command Queueing enabled
da32: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da33 at mpt4 bus 0 scbus4 target 7 lun 0
da33: <ATA Hitachi HDS5C302 A800> Fixed Direct Access SCSI-5 device
da33: 300.000MB/s transfers
da33: Command Queueing enabled
da33: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
SMP: AP CPU #5 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 8984923 Hz quality 800
ugen0.2: <American Megatrends Inc.> at usbus0
ukbd0: <Keyboard Interface> on usbus0
kbd0 at ukbd0
ums0: <Mouse Interface> on usbus0
ugen1.2: <vendor 0x04b4> at usbus1
uhub2: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/0.0b, addr 2> on usbus1
uhub2: MTT enabled
uhub2: 4 ports with 4 removable, self powered
Trying to mount root from zfs:zroot []...
IP Filter: v4.1.28 initialized. Default = pass all, Logging = enabled
bce0: Gigabit link up!
bce0: Gigabit link up!
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1261869099.176558.1370336069971.JavaMail.root>