Date: Tue, 04 May 2010 11:35:48 -0700 From: Sean Bruno <seanbru@yahoo-inc.com> To: Matthew Jacob <mj@feral.com> Cc: "freebsd-scsi@freebsd.org" <freebsd-scsi@freebsd.org> Subject: Re: isp and scsi_target Message-ID: <1272998148.2406.28.camel@localhost.localdomain> In-Reply-To: <4BCE612C.9080201@feral.com> References: <4BCE6988.1060302@fuujingroup.com> <4BCE6016.5020108@feral.com> <4BCE6E5F.7020000@fuujingroup.com> <4BCE612C.9080201@feral.com>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, 2010-04-20 at 19:21 -0700, Matthew Jacob wrote: > Somebody else may be able to help quicker. I have to get a couple of > things of my plate and then do a little recabling in my lab and see just > what the current state of things are for me. > > To be frank, I have not tried with the user level target in quite some > time. It used to just plain hang for me for a year or so. I think that > got fixed recently, but I really then didn't go back and recheck with > this kind of target mode stack. > > I'll try and make some progress tomorrow on getting up to speed on it again. > > _______________________________________________ > freebsd-scsi@freebsd.org mailing list > http://lists.freebsd.org/mailman/listinfo/freebsd-scsi > To unsubscribe, send any mail to "freebsd-scsi-unsubscribe@freebsd.org" Hrm ... this is puzzling. Erich setup a box for me to play with. Either I've forgotten how to turn this on, or it's being ignored? Can you kick my brain back into the right mode? Here's what I get when I attempt to enable target mode on fbsd 8 i386: isp0: <Qlogic ISP 2300 PCI FC-AL Adapter> port 0x5000-0x50ff mem 0xf7ff0000-0xf7ff0fff irq 20 at device 2.0 on pci6 isp0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xf7ff0000 isp0: using Memory space register mapping isp0: [MPSAFE] isp0: [ITHREAD] isp0: Board Type 2300, Chip Revision 0x1, resident F/W Revision 3.1.13 isp0: 744 max I/O command limit set isp0: NVRAM Port WWN 0x210000e08b08f56d isp0: Chan 0 0x200000e08b08f56d/0x210000e08b08f56d Role Initiator isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync> isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync> isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync> isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync> isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync> isp0: Chan 0 Firmware State <Config Wait->Loss Of Sync> (targbh0:isp0:0:-1:-1): Target Mode Not Enabled Yet- Lun Enables Deferred > diff of my kernconf against generic: > diff SEAN GENERIC 115,118d114 < options ISP_TARGET_MODE < device targ < device targbh < options VFS_AIO
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1272998148.2406.28.camel>