Skip site navigation (1)Skip section navigation (2)
Date:      Sat, 9 Nov 2024 11:11:21 +0000 (GMT)
From:      jenkins-admin@FreeBSD.org
To:        mmel@FreeBSD.org, dev-ci@FreeBSD.org
Cc:        jenkins-admin@FreeBSD.org
Subject:   FreeBSD-main-amd64-test - Build #25685 - Failure
Message-ID:  <1284779051.4672.1731150682226@jenkins.ci.freebsd.org>

next in thread | raw e-mail | index | archive | help
------=_Part_4671_1828058500.1731150681951
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: quoted-printable

FreeBSD-main-amd64-test - Build #25685 (0283eebb4a54c7270f9ac03bb4ed2742cb9=
59c28) - Failure

Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25685=
/
Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25685/c=
hanges
Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25685/co=
nsole

Status explanation:
"Failure" - the build is suspected being broken by the following changes
"Still Failing" - the build has not been fixed by the following changes and
                  this is a notification to note that these changes have
                  not been fully tested by the CI system

Change summaries:
(Those commits are likely but not certainly responsible)

ba045ba49dedb068ba2f0e13fbb1c1a91fde8333 by mmel:
arm: Improve the creation of kernel.bin

0283eebb4a54c7270f9ac03bb4ed2742cb959c28 by mmel:
arm: remove accidentally added -Map switch to linker



The end of the build log:

[...truncated 4.22 MiB...]
epair0b: Ethernet address: 02:8e:62:d8:7a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.453s]
sys/netlink/test_rtnl_route.py:TestRtNlRoute::test_add_route4_ll_if_gw  -> =
 epair0a: Ethernet address: 02:8a:88:07:ae:0a
epair0b: Ethernet address: 02:8a:88:07:ae:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.481s]
sys/netlink/test_rtnl_route.py:TestRtNlRoute::test_add_route6_ll_gw  ->  ep=
air0a: Ethernet address: 02:40:78:3f:72:0a
epair0b: Ethernet address: 02:40:78:3f:72:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.488s]
sys/netlink/test_rtnl_route.py:TestRtNlRoute::test_add_route6_ll_if_gw  -> =
 epair0a: Ethernet address: 02:a5:5a:49:fa:0a
epair0b: Ethernet address: 02:a5:5a:49:fa:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.505s]
sys/netlink/test_rtnl_route.py:TestRtNlRoute::test_buffer_override  ->  epa=
ir0a: Ethernet address: 02:6c:dc:49:fa:0a
epair0b: Ethernet address: 02:6c:dc:49:fa:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
lo0: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [0.550s]
sys/netlink/test_snl:snl_list_ifaces  ->  passed  [0.005s]
sys/netlink/test_snl:snl_parse_errmsg_capped  ->  skipped: does not work  [=
0.005s]
sys/netlink/test_snl:snl_parse_errmsg_capped_extack  ->  passed  [0.005s]
sys/netlink/test_snl:snl_parse_errmsg_uncapped_extack  ->  passed  [0.005s]
sys/netlink/test_snl:snl_verify_core_parsers  ->  passed  [0.016s]
sys/netlink/test_snl:snl_verify_route_parsers  ->  passed  [0.005s]
sys/netlink/test_snl_generic:snl_verify_genl_parsers  ->  passed  [0.005s]
sys/netlink/test_snl_generic:test_snl_get_genl_family_failure  ->  passed  =
[0.005s]
sys/netlink/test_snl_generic:test_snl_get_genl_family_groups  ->  passed  [=
0.005s]
sys/netlink/test_snl_generic:test_snl_get_genl_family_success  ->  passed  =
[0.005s]
sys/netpfil/common/dummynet:ipfw_codel  ->  epair0a: Ethernet address: 02:c=
c:9a:a7:92:0a
epair0b: Ethernet address: 02:cc:9a:a7:92:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.425s]
sys/netpfil/common/dummynet:ipfw_interface_removal  ->  epair0a: Ethernet a=
ddress: 02:30:38:5f:54:0a
epair0b: Ethernet address: 02:30:38:5f:54:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [7.550s]
sys/netpfil/common/dummynet:ipfw_pipe  ->  epair0a: Ethernet address: 02:61=
:31:b9:2e:0a
epair0b: Ethernet address: 02:61:31:b9:2e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
tun0: loop detected
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [27.663s]
sys/netpfil/common/dummynet:ipfw_pipe_v6  ->  epair0a: Ethernet address: 02=
:e6:65:52:64:0a
epair0b: Ethernet address: 02:e6:65:52:64:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [24.561s]
sys/netpfil/common/dummynet:ipfw_pls_basic  ->  epair0a: Ethernet address: =
02:6c:da:4a:d1:0a
epair0b: Ethernet address: 02:6c:da:4a:d1:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [12.733s]
sys/netpfil/common/dummynet:ipfw_pls_gilbert  ->  epair0a: Ethernet address=
: 02:46:32:2b:fb:0a
epair0b: Ethernet address: 02:46:32:2b:fb:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [12.743s]
sys/netpfil/common/dummynet:ipfw_queue  ->  skipped: https://bugs.freebsd.o=
rg/264805  [0.079s]
sys/netpfil/common/dummynet:ipfw_queue_v6  ->  epair0a: Ethernet address: 0=
2:00:b2:7f:cb:0a
epair0b: Ethernet address: 02:00:b2:7f:cb:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [14.604s]
sys/netpfil/common/dummynet:pf_codel  ->  epair0a: Ethernet address: 02:f5:=
ad:f1:16:0a
epair0b: Ethernet address: 02:f5:ad:f1:16:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [0.481s]
sys/netpfil/common/dummynet:pf_interface_removal  ->  epair0a: Ethernet add=
ress: 02:4f:94:e4:25:0a
epair0b: Ethernet address: 02:4f:94:e4:25:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0a: link state changed to DOWN
epair0b: link state changed to DOWN
passed  [6.030s]
sys/netpfil/common/dummynet:pf_nat  ->  epair0a: Ethernet address: 02:28:27=
:ec:cd:0a
epair0b: Ethernet address: 02:28:27:ec:cd:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair1a: Ethernet address: 02:dd:22:2d:02:0a
epair1b: Ethernet address: 02:dd:22:2d:02:0b
epair1a: link state changed to UP
epair1b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
epair1a: link state changed to DOWN
epair1b: link state changed to DOWN
passed  [0.612s]
sys/netpfil/common/dummynet:pf_pipe  ->  epair0a: Ethernet address: 02:51:7=
f:20:ea:0a
epair0b: Ethernet address: 02:51:7f:20:ea:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [24.873s]
sys/netpfil/common/dummynet:pf_pipe_v6  ->  epair0a: Ethernet address: 02:0=
b:1e:54:49:0a
epair0b: Ethernet address: 02:0b:1e:54:49:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [22.653s]
sys/netpfil/common/dummynet:pf_pls_basic  ->  epair0a: Ethernet address: 02=
:9e:4a:b8:3a:0a
epair0b: Ethernet address: 02:9e:4a:b8:3a:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [12.863s]
sys/netpfil/common/dummynet:pf_pls_gilbert  ->  epair0a: Ethernet address: =
02:ae:b2:44:1e:0a
epair0b: Ethernet address: 02:ae:b2:44:1e:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
epair0b: link state changed to DOWN
epair0a: link state changed to DOWN
passed  [12.813s]
sys/netpfil/common/dummynet:pf_queue  ->  epair0a: Ethernet address: 02:b2:=
af:b4:b6:0a
epair0b: Ethernet address: 02:b2:af:b4:b6:0b
epair0a: link state changed to UP
epair0b: link state changed to UP
Limiting icmp ping response from 237 to 204 packets/sec
Limiting icmp ping response from 260 to 193 packets/sec
panic: tcp_do_segment: sent too much
cpuid =3D 1
time =3D 1731150680
KDB: stack backtrace:
db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008e318=
830
vpanic() at vpanic+0x136/frame 0xfffffe008e318960
panic() at panic+0x43/frame 0xfffffe008e3189c0
tcp_do_segment() at tcp_do_segment+0x2902/frame 0xfffffe008e318aa0
tcp_input_with_port() at tcp_input_with_port+0x10f8/frame 0xfffffe008e318bf=
0
tcp_input() at tcp_input+0xb/frame 0xfffffe008e318c00
ip_input() at ip_input+0x28f/frame 0xfffffe008e318c60
netisr_dispatch_src() at netisr_dispatch_src+0xb4/frame 0xfffffe008e318cc0
ether_demux() at ether_demux+0x16a/frame 0xfffffe008e318cf0
ether_nh_input() at ether_nh_input+0x3cd/frame 0xfffffe008e318d40
netisr_dispatch_src() at netisr_dispatch_src+0xb4/frame 0xfffffe008e318da0
ether_input() at ether_input+0xd5/frame 0xfffffe008e318e00
epair_tx_start_deferred() at epair_tx_start_deferred+0xd4/frame 0xfffffe008=
e318e40
taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008e318e=
c0
taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008e318=
ef0
fork_exit() at fork_exit+0x82/frame 0xfffffe008e318f30
fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008e318f30
--- trap 0x9c8d0c0, rip =3D 0xfff09c7ef50, rsp =3D 0xfff09c7efb0, rbp =3D 0=
xfff09cd4880 ---
KDB: enter: panic
[ thread pid 0 tid 100168 ]
Stopped at      kdb_enter+0x33: movq    $0,0x10572f2(%rip)
db:0:kdb.enter.panic> show pcpu
cpuid        =3D 1
dynamic pcpu =3D 0xfffffe008f7c1dc0
curthread    =3D 0xfffff80025f96740: pid 0 tid 100168 critnest 1 "epair_tas=
k"
curpcb       =3D 0xfffff80025f96c60
fpcurthread  =3D none
idlethread   =3D 0xfffff8010260a000: tid 100004 "idle: cpu1"
self         =3D 0xffffffff82411000
curpmap      =3D 0xffffffff81b9ce30
tssp         =3D 0xffffffff82411384
rsp0         =3D 0xfffffe008e319000
kcr3         =3D 0x800000000238e002
ucr3         =3D 0xffffffffffffffff
scr3         =3D 0x1abc6a39
gs32p        =3D 0xffffffff82411404
ldt          =3D 0xffffffff82411444
tss          =3D 0xffffffff82411434
curvnet      =3D 0xfffff8001a983a40
spin locks held:
db:0:kdb.enter.panic>  reset
Uptime: 48m25s
+ rc=3D0
+ echo 'bhyve return code =3D 0'
bhyve return code =3D 0
+ sudo /usr/sbin/bhyvectl '--vm=3Dtestvm-main-amd64-25685' --destroy
+ sh -ex freebsd-ci/scripts/test/extract-meta.sh
+ METAOUTDIR=3Dmeta-out
+ rm -fr meta-out
+ mkdir meta-out
+ tar xvf meta.tar -C meta-out
x ./
x ./run-kyua.sh
x ./run.sh
x ./auto-shutdown
x ./disable-notyet-tests.sh
x ./disable-zfs-tests.sh
x ./disable-dtrace-tests.sh
+ rm -f test-report.txt test-report.xml
+ mv 'meta-out/test-report.*' .
mv: rename meta-out/test-report.* to ./test-report.*: No such file or direc=
tory
+ report=3Dtest-report.xml
+ [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report=
.xml ]
+ rm -f disk-cam
+ jot 5
+ rm -f disk1
+ rm -f disk2
+ rm -f disk3
+ rm -f disk4
+ rm -f disk5
+ rm -f disk-test.img
[PostBuildScript] - [INFO] Executing post build scripts.
[FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins9526079148544595202.sh
+ ./freebsd-ci/artifact/post-link.py
Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': '0283eebb4a54c=
7270f9ac03bb4ed2742cb959c28', 'branch': 'main', 'target': 'amd64', 'target_=
arch': 'amd64', 'link_type': 'latest_tested'}
"Link created: main/latest_tested/amd64/amd64 -> ../../0283eebb4a54c7270f9a=
c03bb4ed2742cb959c28/amd64/amd64\n"
Recording test results
ERROR: Step =E2=80=98Publish JUnit test result report=E2=80=99 failed: No t=
est report files were found. Configuration error?
Checking for post-build
Performing post-build step
Checking if email needs to be generated
Email was triggered for: Failure - Any
Sending email for trigger: Failure - Any
Sending mail from default account using System Admin e-mail address
------=_Part_4671_1828058500.1731150681951--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1284779051.4672.1731150682226>