Date: Mon, 17 Jun 2002 01:21:53 +0200 From: Alex <freebsd-reply@akruijff.dds.nl> To: freebsd-stable@FreeBSD.ORG Subject: 4.6 trouble Message-ID: <13643062791.20020617012153@dds.nl>
next in thread | raw e-mail | index | archive | help
Hello/Beste , I have a Pentium 60MHz system with 2 hard drives. The first is 1G and the second is 2.5G large. After is updated to FreeBSD 4.6 i got a problem with accessing my root slice. This is the first and only slice on the first disk. After i updated though compiling the sources i tried to do a fresh install. It resulted in the same problem. I appreciate any solutions or suggestion you could give me on how to solve his. <<<<<<<<<>>>>>>>>> FreeBSD 4.6-RELEASE #0: Tue jun 11 06.14.12 GMT 2002 murry GENERIC CPU: Pentium/P5 (60MHz) Inetl Pentium detected, installing workaround for F00F bug Math emulator present npx0: <math processor> on motherboard npx: INT 16 interface fount -> vendor=0x8086 dev=0x04a3 revid=0x03 class=06-00-00 hdrtype=0x00 mfdev=0 subordinatebus=0 secondarybus=0 fount->vendor=0x1042 dev=0x1000 revid=0x01 class=01-01-00 hdrtype=0x00 mfdev=0 subordinatebus=0 secondarybus=0 map[10]: type 1 range 32 base 1f0 size 3 map[14] type 1 range 32 base 3f4 size 2 found-> vendor=0x8086 dev=0x0484 revid=0x43 class=00-00-00 hdrtype=0x00 mfdev=0 subordinatebus=0 secondarybus=0 found-> veondor=0x10b7 dev=0x9200 revid=0x74 class=02-00-00 hdrtype=0x00 mfdev=0 sybordinatebus=0 secondarybus=0 intpin=a irq=11 map[10] type 1 range 32 base fc80 size 7 map[14] type 1 range 32 base ffbffc00 size 7 found-> vendor=0x10ec dev=8029 revid=0x00 class 02-00-00 hdrtype=0x00 mfdev=0 subordinatebus=0 secondarybus=0 intpin=a irq=10 map[10]: type 1 range 32 base fc60 size 5 atapci0: <RZ 100? ATA controller !WARNING! buggy chip data loss posible> \ port 0x3f4-0x3f7, 0x1f0-0x1f7 at device 1.0 on pci0 atapci0: Busmastering DMA not supported atapci0: Busmastering DMA disabled ata2: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x000 ata2: mask=03 ostat9=50 ostat2=50 ata2-master: ATAPI 00 00 ata2-slave ATAPI 00 00 ata2: mask=03 stat0=50 stat1=50 ata2-master: ATA 01 05 ata2-slave ATA 01 a5 ata2: devices=03 ata2: at 0x1f0 on atapci0 ata2: unable to allocate interrupt device_probe_and_attach: ata2 attach returned 6 <SNIP> ata0 failed to probe at port 0x1f0 irq 14 on isa0 ata1 iobase=0x170 altiobase=0x376 bmaddr=0x0000 ata1:= mask=01 ostat0=00 ostat2=ff ata1-master: ATAPI 14 eb ata1: mask=01 ostat0=00 ostat2=ff ata1: devices=04 ata1 at port 0x170-0x177,0x376 irq 15 on isa0 adv0: not probed (disabled) <SNIP> pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 <SNIP> BIOS Geometries: 0:03fe0f3f 0..1002=1023 cylinders, 0..15=16 head, 1..63=64 sectors 1:03fe0f3f 0..1002=1023 cylinders, 0..15=16 head, 1..63=64 sectors 0 accounted for <SNIP> ata1-master: piomode=1 dmamode=-1 udmamode=-1 dmaflag=0 <SNIP> Mounting root from ufs:/dev/ad0s1a no such devide 'ad' setrootbyname faile ffs_mountroot: can't find rootvp Root mount failed: 6 <<<<<<<<<>>>>>>>>> Now a screen comes up for manual mounting of the root fs This is what the higher part of the IRQ looks like. 10 NIC ed0 11 NIC xl0 13 math processor 14 ad0 15 ad1 -- Best regards/Met vriendelijke groet, Alex To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-stable" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13643062791.20020617012153>