Date: Thu, 28 Aug 2003 13:38:03 +0200 From: "Putinas" <pilkis@gmx.net> To: <freebsd-current@freebsd.org> Subject: Sil3112 dma errors Message-ID: <136801c36d58$d9f186a0$0464a8c0@spotripoli.local>
next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. ------=_NextPart_000_1361_01C36D69.9B140500 Content-Type: text/plain; charset="ISO-8859-1" Content-Transfer-Encoding: 7bit Hi all, recently I upgraded my kernel to the last version ( Aug 28 now, before was runing Aug 5 version ), and I startet to get error like this: Aug 27 17:03:23 pilkishome kernel: ad4: WARNING - WRITE_DMA recovered from missing interrupt Aug 27 17:03:23 pilkishome kernel: ad4: WARNING - WRITE_DMA soft error (ECC corrected)ad4: FAILURE - WRITE_DMA status=ff<BUSY,READY,DMA_READY,DSC,DRQ,CORRECTABLE,INDEX,ERROR> error=0... <here ends syslogd> ad4: WARNING - WRITE_DMA recovery from missing interupt ad4: timeout sending command=ca ad4: error issuing DMA command after where is coming dma timeout, but in the syslog already nothing, system becomes unresponsible here is my uname and dmesg FreeBSD pilkishome.spo-tripoli.local 5.1-CURRENT FreeBSD 5.1-CURRENT #0: Thu Aug 28 14:37:53 EEST 2003 root@:/usr/obj/usr/src/sys/GENERIC i386 upport enabled npx0: <math processor> on motherboard npx0: INT 16 interface acpi0: <ASUS P4G8X > on motherboard pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c pci_open(1a): mode1res=0x80000000 (0x80000000) pci_cfgcheck: device 0 [class=060000] [hdr=80] is there (id=255d8086) pcibios: BIOS version 2.10 Using $PIR table, 11 entries at 0xc00f2320 PCI-Only Interrupts: none Location Bus Device Pin Link IRQs slot 6 1 0 A 0x60 3 4 5 7 9 10 11 12 slot 6 1 0 B 0x61 3 4 5 7 9 10 11 12 embedded 0 29 A 0x60 3 4 5 7 9 10 11 12 embedded 0 29 B 0x63 3 4 5 7 9 10 11 12 embedded 0 29 C 0x62 3 4 5 7 9 10 11 12 embedded 0 29 D 0x6b 3 4 5 7 9 10 11 12 embedded 0 31 A 0x62 3 4 5 7 9 10 11 12 embedded 0 31 B 0x61 3 4 5 7 9 10 11 12 slot 1 2 0 A 0x69 3 4 5 7 9 10 11 12 slot 1 2 0 B 0x6a 3 4 5 7 9 10 11 12 slot 1 2 0 C 0x6b 3 4 5 7 9 10 11 12 slot 1 2 0 D 0x68 3 4 5 7 9 10 11 12 slot 2 2 1 A 0x6a 3 4 5 7 9 10 11 12 slot 2 2 1 B 0x6b 3 4 5 7 9 10 11 12 slot 2 2 1 C 0x68 3 4 5 7 9 10 11 12 slot 2 2 1 D 0x69 3 4 5 7 9 10 11 12 slot 3 2 2 A 0x6b 3 4 5 7 9 10 11 12 slot 3 2 2 B 0x68 3 4 5 7 9 10 11 12 slot 3 2 2 C 0x69 3 4 5 7 9 10 11 12 slot 3 2 2 D 0x6a 3 4 5 7 9 10 11 12 slot 4 2 6 A 0x68 3 4 5 7 9 10 11 12 slot 4 2 6 B 0x69 3 4 5 7 9 10 11 12 slot 4 2 6 C 0x6a 3 4 5 7 9 10 11 12 slot 4 2 6 D 0x6b 3 4 5 7 9 10 11 12 slot 5 2 7 A 0x62 3 4 5 7 9 10 11 12 slot 5 2 7 B 0x63 3 4 5 7 9 10 11 12 slot 5 2 7 C 0x60 3 4 5 7 9 10 11 12 slot 5 2 7 D 0x61 3 4 5 7 9 10 11 12 embedded 2 5 A 0x62 3 4 5 7 9 10 11 12 embedded 2 3 A 0x61 3 4 5 7 9 10 11 12 embedded 2 4 A 0x69 3 4 5 7 9 10 11 12 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi0: power button is handled as a fixed feature programming model. ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 1060, width = 1057 ACPI timer looks GOOD min = 3, max = 4, width = 1 ACPI timer looks BAD min = 3, max = 1055, width = 1052 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 1055, width = 1052 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 1055, width = 1052 ACPI timer looks GOOD min = 3, max = 3, width = 0 ACPI timer looks BAD min = 3, max = 1052, width = 1049 Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_button0: <Power Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.1 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.1 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.29.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.31.1 pci0: <ACPI PCI bus> on pcib0 pci0: physical bus=0 map[10]: type 3, range 32, base f8000000, size 26, enabled found-> vendor=0x8086, dev=0x255d, revid=0x03 bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0046, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2551, revid=0x03 bus=0, slot=0, func=1 class=ff-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0000, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 3, range 32, base f4000000, size 26, enabled found-> vendor=0x8086, dev=0x2552, revid=0x03 bus=0, slot=1, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0007, statreg=0x00b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns) map[20]: type 4, range 32, base 0000d800, size 5, enabled pcib0: matched entry for 0.29.INTA (source \\_SB_.LNKA) pcib0: slot 29 INTA is routed to irq 11 found-> vendor=0x8086, dev=0x24c2, revid=0x02 bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[20]: type 4, range 32, base 0000d400, size 5, enabled pcib0: matched entry for 0.29.INTB (source \\_SB_.LNKD) pcib0: slot 29 INTB is routed to irq 9 found-> vendor=0x8086, dev=0x24c4, revid=0x02 bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=9 map[20]: type 4, range 32, base 0000d000, size 5, enabled pcib0: matched entry for 0.29.INTC (source \\_SB_.LNKC) pcib0: slot 29 INTC is routed to irq 5 found-> vendor=0x8086, dev=0x24c7, revid=0x02 bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=5 map[10]: type 1, range 32, base ed800000, size 10, enabled pcib0: matched entry for 0.29.INTD (source \\_SB_.LNKH) pcib0: slot 29 INTD is routed to irq 9 found-> vendor=0x8086, dev=0x24cd, revid=0x02 bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=9 powerspec 2 supports D0 D3 current D0 found-> vendor=0x8086, dev=0x244e, revid=0x82 bus=0, slot=30, func=0 class=06-04-00, hdrtype=0x01, mfdev=0 cmdreg=0x0107, statreg=0x0080, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x06 (1500 ns), maxlat=0x02 (500 ns) found-> vendor=0x8086, dev=0x24c0, revid=0x02 bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x010f, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[10]: type 4, range 32, base 00000000, size 3, enabled map[14]: type 4, range 32, base 00000000, size 2, enabled map[18]: type 4, range 32, base 00000000, size 3, enabled map[1c]: type 4, range 32, base 00000000, size 2, enabled map[20]: type 4, range 32, base 0000f000, size 4, enabled pcib0: matched entry for 0.31.INTA (source \\_SB_.LNKC) pcib0: slot 31 INTA is routed to irq 5 found-> vendor=0x8086, dev=0x24cb, revid=0x02 bus=0, slot=31, func=1 class=01-01-8a, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 agp0: <Intel Generic host to PCI bridge> mem 0xf8000000-0xfbffffff at device 0.0 on pci0 agp0: allocating GATT for aperture of size 64M pci0: <unknown> at device 0.1 (no driver attached) pcib1: <ACPI PCI-PCI bridge> mem 0xf4000000-0xf7ffffff at device 1.0 on pci0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xdfff pcib1: memory decode 0xee000000-0xefdfffff pcib1: prefetched decode 0xeff00000-0xf3ffffff ---- initial configuration ------------------------ \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.1 ---- before setting priority for links ------------ ---- before fixup boot-disabled links ------------- ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 1.0.1 pci1: <ACPI PCI bus> on pcib1 pci1: physical bus=1 map[10]: type 1, range 32, base ee000000, size 24, enabled map[14]: type 3, range 32, base f0000000, size 26, enabled pcib1: matched entry for 1.0.INTA (source \\_SB_.LNKA) pcib1: slot 0 INTA is routed to irq 11 found-> vendor=0x10de, dev=0x0281, revid=0xa1 bus=1, slot=0, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns) intpin=a, irq=11 powerspec 2 supports D0 D3 current D0 pci1: <display, VGA> at device 0.0 (no driver attached) uhci0: <Intel 82801DB (ICH4) USB controller USB-A> port 0xd800-0xd81f irq 11 at device 29.0 on pci0 usb0: <Intel 82801DB (ICH4) USB controller USB-A> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft IntelliMouse\M-. Explorer, rev 1.10/1.21, addr 2, iclass 3/1 ums0: 5 buttons and Z dir. ukbd0: SILITEK USB Keyboard and Mouse, rev 1.00/1.20, addr 3, iclass 3/1 kbd: new array size 4 kbd1 at ukbd0 kbd1: ukbd0, generic (0), config:0x0, flags:0x1d0000 ums1: SILITEK USB Keyboard and Mouse, rev 1.00/1.20, addr 3, iclass 3/0 ums1: 3 buttons and Z dir. uhci1: <Intel 82801DB (ICH4) USB controller USB-B> port 0xd400-0xd41f irq 9 at device 29.1 on pci0 usb1: <Intel 82801DB (ICH4) USB controller USB-B> on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2: <Intel 82801DB (ICH4) USB controller USB-C> port 0xd000-0xd01f irq 5 at device 29.2 on pci0 usb2: <Intel 82801DB (ICH4) USB controller USB-C> on uhci2 usb2: USB revision 1.0 uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered pci0: <serial bus, USB> at device 29.7 (no driver attached) pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pcib2: secondary bus 2 pcib2: subordinate bus 2 pcib2: I/O decode 0x9000-0xbfff pcib2: memory decode 0xeb800000-0xed7fffff pcib2: prefetched decode 0xefe00000-0xefefffff ---- initial configuration ------------------------ \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.0 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.3 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.0 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.1 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.2 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.3 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.0 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.1 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.2 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.1 \\_SB_.LNKG irq 0: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.5.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.3.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.4.0 ---- before setting priority for links ------------ \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1440 1440 840 1440 1440 2040 840 740 1440 10440 10440 references: 4 priority: 0 ---- before fixup boot-disabled links ------------- \\_SB_.LNKG: interrupts: 3 4 5 6 7 9 10 11 12 14 15 penalty: 1440 1440 840 1440 1440 2040 840 740 1440 10440 10440 references: 4 priority: 11832 ---- after fixup boot-disabled links -------------- ---- arbitrated configuration --------------------- \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.0 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.1 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.2 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.0.3 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.0 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.1 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.2 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.1.3 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.0 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.1 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.2 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.2.3 \\_SB_.LNKE irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.1 \\_SB_.LNKG irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.2 \\_SB_.LNKH irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.6.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.0 \\_SB_.LNKD irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.1 \\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.2 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.7.3 \\_SB_.LNKC irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.5.0 \\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.3.0 \\_SB_.LNKF irq 9: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 2.4.0 pci2: <ACPI PCI bus> on pcib2 pci2: physical bus=2 map[10]: type 4, range 32, base 0000b800, size 5, enabled pcib2: matched entry for 2.2.INTA (source \\_SB_.LNKH) pcib2: slot 2 INTA is routed to irq 9 found-> vendor=0x1102, dev=0x0002, revid=0x07 bus=2, slot=2, func=0 class=04-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns) intpin=a, irq=9 powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000b400, size 3, enabled found-> vendor=0x1102, dev=0x7002, revid=0x07 bus=2, slot=2, func=1 class=09-80-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) powerspec 1 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 32, base ed000000, size 11, enabled map[14]: type 1, range 32, base ec800000, size 14, enabled pcib2: matched entry for 2.3.INTA (source \\_SB_.LNKB) pcib2: slot 3 INTA is routed to irq 10 found-> vendor=0x104c, dev=0x8023, revid=0x00 bus=2, slot=3, func=0 class=0c-00-10, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x0210, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x04 (1000 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 4, range 32, base 0000b000, size 3, enabled map[14]: type 4, range 32, base 0000a800, size 2, enabled map[18]: type 4, range 32, base 0000a400, size 3, enabled map[1c]: type 4, range 32, base 0000a000, size 2, enabled map[20]: type 4, range 32, base 00009800, size 4, enabled map[24]: type 1, range 32, base ec000000, size 9, enabled pcib2: matched entry for 2.4.INTA (source \\_SB_.LNKF) pcib2: slot 4 INTA is routed to irq 9 found-> vendor=0x1095, dev=0x3112, revid=0x02 bus=2, slot=4, func=0 class=01-04-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=9 powerspec 2 supports D0 D1 D2 D3 current D0 map[10]: type 1, range 64, base eb800000, size 16, enabled pcib2: matched entry for 2.5.INTA (source \\_SB_.LNKC) pcib2: slot 5 INTA is routed to irq 5 found-> vendor=0x14e4, dev=0x16a6, revid=0x02 bus=2, slot=5, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0016, statreg=0x02b0, cachelnsz=16 (dwords) lattimer=0x20 (960 ns), mingnt=0x40 (16000 ns), maxlat=0x00 (0 ns) intpin=a, irq=5 powerspec 2 supports D0 D3 current D0 map[10]: type 4, range 32, base 00009400, size 7, enabled pcib2: matched entry for 2.6.INTA (source \\_SB_.LNKE) pcib2: slot 6 INTA is routed to irq 9 found-> vendor=0x1022, dev=0x2020, revid=0x10 bus=2, slot=6, func=0 class=01-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0085, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=9 pci2: <multimedia, audio> at device 2.0 (no driver attached) pci2: <input device> at device 2.1 (no driver attached) fwohci0: <Texas Instruments TSB43AB22/A> mem 0xec800000-0xec803fff,0xed000000-0xed0007ff irq 10 at device 3.0 on pci2 fwohci0: latency timer 32 -> 32. fwohci0: cache size 16 -> 16. pcib2: device fwohci0 requested decoded memory range 0xed000000-0xed0007ff fwohci0: OHCI version 1.10 (ROM=1) fwohci0: No. of Isochronous channel is 4. fwohci0: EUI64 00:e0:18:00:00:15:e5:ce fwohci0: resetting OHCI...done (loop=0) fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x3 loop=0, retry=0 fwohci0: Phy 1394a available S400, 2 ports. fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: Enable 1394a Enhancements fwohci0: fwphy_rddata: 0x5 loop=0, retry=0 fwohci0: fwphy_rddata: 0x2 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: fwphy_rddata: 0x4 loop=0, retry=0 fwohci0: Link S400, max_rec 2048 bytes. fwohci0: BUS_OPT 0xa002 -> 0xf800a002 fwohci0: fwohci_set_intr: 1 firewire0: <IEEE1394(FireWire) bus> on fwohci0 if_fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:e0:18:15:e5:ce fwe0: bpf attached sbp0: <SBP2/SCSI over firewire> on firewire0 sbp_attach (cold=1) fwohci0: Initiate bus reset fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: fwphy_rddata: 0x1 loop=0, retry=0 fwohci0: BUS reset sbp_post_busreset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) fwohci0: fw_set_bus_manager: 0->0 (loop=0) firewire0: bus manager 0 (me) send phy_config root_node=-1 gap_count=5 fwohci0: maxdesc: 2 fwohci0: start AT DMA status=0 atapci0: <SiI 3112 SATA150 controller> port 0x9800-0x980f,0xa000-0xa003,0xa400-0xa407,0xa800-0xa803,0xb000-0xb007 mem 0xec000000-0xec0001ff irq 9 at device 4.0 on pci2 pcib2: device atapci0 requested decoded I/O range 0x9800-0x980f pcib2: device atapci0 requested decoded memory range 0xec000000-0xec0001ff ata2: pre reset mask=01 ostat0=50 ostat2=00 ata2-master: ATAPI 00 00 ata2: after reset mask=01 stat0=50 stat1=00 ata2-master: ATA 01 a5 ata2: devices=01 ata2: at 0xec000000 on atapci0 ata3: pre reset mask=01 ostat0=50 ostat2=00 ata3-master: ATAPI 00 00 ata3: after reset mask=01 stat0=50 stat1=00 ata3-master: ATA 01 a5 ata3: devices=01 ata3: at 0xec000000 on atapci0 bge0: <Broadcom BCM5702 Gigabit Ethernet, ASIC rev. 0x1002> mem 0xeb800000-0xeb80ffff irq 5 at device 5.0 on pci2 pcib2: device bge0 requested decoded memory range 0xeb800000-0xeb80ffff bge0: Ethernet address: 00:0c:6e:11:8c:d3 miibus0: <MII bus> on bge0 brgphy0: <BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto bge0: bpf attached amd0: <Tekram DC390(T)/AMD53c974 SCSI Host Adapter> port 0x9400-0x947f irq 9 at device 6.0 on pci2 pcib2: device amd0 requested decoded I/O range 0x9400-0x947f amd0: SEEPROM data unavailable. Using default device parameters. isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 atapci1: <Intel ICH4 UDMA100 controller> port 0xf000-0xf00f,0-0x3,0-0x7,0-0x3,0-0x7 irq 5 at device 31.1 on pci0 ata0: pre reset mask=03 ostat0=00 ostat2=00 ata0-master: ATAPI 01 01 ata0-slave: ATAPI 01 01 ata0: after reset mask=03 stat0=01 stat1=01 ata0: devices=00 ata0: at 0x1f0 irq 14 on atapci1 ata1: pre reset mask=03 ostat0=50 ostat2=00 ata1-master: ATAPI 14 eb ata1-slave: ATAPI 00 00 ata1: after reset mask=03 stat0=10 stat1=00 ata1: devices=04 ata1: at 0x170 irq 15 on atapci1 unknown: not probed (disabled) fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 unknown: not probed (disabled) ppc0: using extended I/O port range ppc0: ECP SPP ECP+EPP SPP ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lp0: bpf attached lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sio0: irq maps: 0xc43 0xc53 0xc43 0xc43 sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1: irq maps: 0xc43 0xc4b 0xc43 0xc43 sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) unknown: not probed (disabled) ata: ata0 already exists; skipping it ata: ata1 already exists; skipping it fdc: fdc0 already exists; skipping it ppc: ppc0 already exists; skipping it sio: sio0 already exists; skipping it sio: sio1 already exists; skipping it Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 ex_isa_identify() sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0: <Option ROMs> at iomem 0xd4000-0xd87ff,0xd0000-0xd3fff on isa0 pmtimer0 on isa0 adv0: not probed (disabled) aha0: not probed (disabled) aic0: not probed (disabled) atkbdc0: <Keyboard controller (i8042)> failed to probe at port 0x60 on isa0 bt0: not probed (disabled) cs0: not probed (disabled) ed0: not probed (disabled) fe0: not probed (disabled) ie0: not probed (disabled) le0: not probed (disabled) lnc0: not probed (disabled) pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0 pcic1: not probed (disabled) atkbd: the current kbd controller command byte 0047 atkbd: keyboard ID 0xffffffff (1) atkbd: failed to reset the keyboard. sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio2: not probed (disabled) sio3: not probed (disabled) sn0: not probed (disabled) vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff EGA/VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 54 80 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vt0: not probed (disabled) isa_probe_children: probing PnP devices Device configuration finished. procfs registered Timecounter "TSC" frequency 2715131024 Hz quality 800 Timecounters tick every 10.000 msec lo0: bpf attached Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3e234000 OUTL ST2 ALL ALL 12 00000000 3e234080 8411:0006 RUN,ACTIVE, ack complete(11) 0x000000e0 0x00450000 0xffbaffff 0x00000000 ata1-master: pio=0x0c wdma=0x22 udma=0x42 cable=40pin acd0: setting PIO4 on Intel ICH4 chip acd0: <HL-DT-ST GCE-8481B/1.05> CDRW drive at ata1 as master acd0: read 6890KB/s (6890KB/s) write 688KB/s (8268KB/s), 2048KB buffer, PIO4 acd0: Reads: CDR, CDRW, CDDA stream, packet acd0: Writes: CDR, CDRW, test write, burnproof acd0: Audio: play, 255 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ata2-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin ad4: setting UDMA100 on SiI 3112 chip ad4: <IC35L120AVVA07-0/VA6OA52A> ATA-5 disk at ata2-master ad4: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad4: 16 secs/int, 1 depth queue, UDMA100 GEOM: new disk ad4 ar: FreeBSD check1 failed ata3-master: pio=0x0c wdma=0x22 udma=0x45 cable=40pin ad6: setting UDMA100 on SiI 3112 chip ad6: <IC35L120AVVA07-0/VA6OA52A> ATA-5 disk at ata3-master ad6: 117800MB (241254720 sectors), 239340 C, 16 H, 63 S, 512 B ad6: 16 secs/int, 1 depth queue, UDMA100 ar: FreeBSD check1 failed Waiting 15 seconds for SCSI devices to settle bus_explore done sbp_post_explore (sbp_cold=2) [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):521/254/63 s:63 l:8385867 [1] f:00 typ:7 s(CHS):522/0/1 e(CHS):1023/254/63 s:8385930 l:8385930 [2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:16771860 l:8385930 [3] f:00 typ:7 s(CHS):1023/255/63 e(CHS):1023/254/63 s:25157790 l:216090315 GEOM: Configure ad4s1, start 32256 length 4293563904 end 4293596159 GEOM: Configure ad4s2, start 4293596160 length 4293596160 end 8587192319 GEOM: Configure ad4s3, start 8587192320 length 4293596160 end 12880788479 GEOM: Configure ad4s4, start 12880788480 length 110638241280 end 123519029759 GEOM: new disk ad6 GEOM: Configure ad4s3a, start 134217728 length 4159378432 end 4293596159 GEOM: Configure ad4s3b, start 0 length 134217728 end 134217727 GEOM: Configure ad4s3c, start 0 length 4293596160 end 4293596159 [0] f:80 typ:7 s(CHS):0/1/1 e(CHS):521/254/63 s:63 l:8385867 [1] f:00 typ:7 s(CHS):522/0/1 e(CHS):1022/254/63 s:8385930 l:8385930 [2] f:00 typ:165 s(CHS):1022/254/63 e(CHS):1022/254/63 s:16771860 l:8385930 [3] f:00 typ:7 s(CHS):1022/254/63 e(CHS):1022/254/63 s:25157790 l:216090315 GEOM: Configure ad6s1, start 32256 length 4293563904 end 4293596159 GEOM: Configure ad6s2, start 4293596160 length 4293596160 end 8587192319 GEOM: Configure ad6s3, start 8587192320 length 4293596160 end 12880788479 GEOM: Configure ad6s4, start 12880788480 length 110638241280 end 123519029759 GEOM: Configure ad6s3a, start 134217728 length 4159378432 end 4293596159 GEOM: Configure ad6s3b, start 0 length 134217728 end 134217727 GEOM: Configure ad6s3c, start 0 length 4293596160 end 4293596159 (probe0:sbp0:0:0:0): error 22 (probe0:sbp0:0:0:0): Unretryable Error (probe1:sbp0:0:1:0): error 22 (probe1:sbp0:0:1:0): Unretryable Error (probe2:sbp0:0:2:0): error 22 (probe2:sbp0:0:2:0): Unretryable Error (probe3:sbp0:0:3:0): error 22 (probe3:sbp0:0:3:0): Unretryable Error (probe4:sbp0:0:4:0): error 22 (probe4:sbp0:0:4:0): Unretryable Error (probe5:sbp0:0:5:0): error 22 (probe5:sbp0:0:5:0): Unretryable Error (probe6:sbp0:0:6:0): error 22 (probe6:sbp0:0:6:0): Unretryable Error Mounting root from ufs:/dev/ad4s3a WARNING: / was not properly dismounted start_init: trying /sbin/init start IR DMA 0x0 fwohci0: maxdesc: 3 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3e234080 OUTM ST2 NEV NEV 8 00000000 deadc0de 0000:0000 Nostat 0x000201a0 0x00500000 0x00000000 0x00000000 3e234080 OUTL ST0 ALL ALL 80 317a1c30 3e234100 8451:87ae RUN,ACTIVE, ack complete(11) Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3e234100 OUTM ST2 NEV NEV 8 00000000 deadc0de 0000:0000 Nostat 0x000201a0 0x00480000 0x00000000 0x00000000 3e234100 OUTL ST0 ALL ALL 72 317a1eb8 3e234180 8451:d60e RUN,ACTIVE, ack complete(11) fwohci0: maxdesc: 5 Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3e234180 OUTM ST2 NEV NEV 8 00000000 deadc0de 0000:0000 Nostat 0x000201a0 0x00580000 0x00000000 0x00000000 3e234180 OUTM ST0 NEV NEV 56 0080fbc8 deadc0de 0000:0000 Nostat 3e234180 OUTM ST0 NEV NEV 8 317a1d18 deadc0de 0000:0000 Nostat 3e234180 OUTL ST0 ALL ALL 24 317a1e18 3e234200 8451:f65e RUN,ACTIVE, ack complete(11) Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3e234200 OUTM ST2 NEV NEV 8 00000000 deadc0de 0000:0000 Nostat 0x000201a0 0x00480000 0x00000000 0x00000000 3e234200 OUTL ST0 ALL ALL 72 317a1eb8 3e234280 8451:565e RUN,ACTIVE, ack complete(11) Current DB 0 ch = 0 Current OP KEY INT BR len Addr Depend Stat: Cnt 3e234280 OUTM ST2 NEV NEV 8 00000000 deadc0de 0000:0000 Nostat 0x000201a0 0x00480000 0x00000000 0x00000000 3e234280 OUTL ST0 ALL ALL 72 317a1eb8 3e234300 8451:d6af RUN,ACTIVE, ack complete(11) ------=_NextPart_000_1361_01C36D69.9B140500--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?136801c36d58$d9f186a0$0464a8c0>