Date: Tue, 30 Jun 1998 11:24:17 +0200 (MET DST) From: Andreas Lohrum 6804 <Andreas.Lohrum@ae3.hypo.de> To: freebsd-isdn@FreeBSD.ORG Cc: Meike Aulbach <strange@stoned.rhein-main.de> Subject: Re: No space in TX FIFO - finally succeeded Message-ID: <13720.44737.132122.290280@ws030mqa.hypobank> In-Reply-To: <13719.27043.180878.48131@ws030mqa.hypobank> References: <19980626204212.A1091@stoned.ether.net> <13719.27043.180878.48131@ws030mqa.hypobank>
next in thread | previous in thread | raw e-mail | index | archive | help
Ok,
i4b now works for me, I had a USB-device interfering on IRQ 9,
which was supposed to be only for my Creatix Card.
(NetBSD 1.3, Creatix)
Strange enough, my DOS s0-test worked, are they just polling the card?
Just for reference, the logs were like:
=================================================================
Jun 28 15:29:39 hal isdnd[353]: DMN init_controller: controller 0 is Teles S0/16
Jun 28 15:29:39 hal isdnd[353]: DMN init_controller: found 1 ISDN controller(s)
Jun 28 15:29:40 hal isdnd[353]: DMN daemon started (pid = 353)
Jun 28 15:35:46 hal /netbsd: i4b-L4-i4biproutput: ipr0: send dial request message!
Jun 28 15:35:46 hal /netbsd: i4b-L4-i4biproutput: ipr0: setting dial state to ST_DIALING
Jun 28 15:35:46 hal /netbsd: i4b-L4-i4biprstart: ipr0: not connected!
Jun 28 15:35:46 hal /netbsd: i4b-L4-reserve_cd: found free cd - index=0 cdid=1
Jun 28 15:35:46 hal /netbsd: i4b-L4-cd_by_cdid: found cdid - index=0 cdid=1 cr=0
Jun 28 15:35:46 hal /netbsd: i4b-L4-i4bioctl: I4B_CONNECT_REQ times, unitlen=150 idle=30 e
arlyhup=5
Jun 28 15:35:47 hal /netbsd: i4b-L4-cd_by_cdid: found cdid - index=0 cdid=1 cr=53
Jun 28 15:35:47 hal /netbsd: i4b-L3-next_l3state: L3 FSM event [EV_SETUPRQ - L4 SETUP REQ]
: [ST_U0 - Null => ST_SUSE - Subroutine sets state]
Jun 28 15:35:47 hal /netbsd: i4b-L3-F_00A: FSM function F_00A executing
Jun 28 15:35:47 hal /netbsd: i4b-L2-i4b_dl_establish_req: unit 0
Jun 28 15:35:47 hal /netbsd: i4b-L1-ph_activate_req: unit = 0
Jun 28 15:35:47 hal /netbsd: i4b-L1-isic_next_state: FSM event [EV_PHAR PH_ACT_REQ]: [F3 D
eactivated => F4 Awaiting Signal]
Jun 28 15:35:47 hal /netbsd: i4b-L1-F_AR: FSM function F_AR executing
Jun 28 15:35:47 hal /netbsd: i4b-L1-isic_isac_l1_cmd: tx AR8 in state F3 Deactivated
Jun 28 15:35:47 hal /netbsd: i4b-L1-T3_start: state = F3 Deactivated
Jun 28 15:35:47 hal /netbsd: i4b-L2-i4b_next_l2state: FSM event [EV_DLESTRQ]: [ST_TEI_UNAS
/0 => ST_EST_AW_TEI/2]
Jun 28 15:35:47 hal /netbsd: i4b-L2-F_TU01: FSM function F_TU01 executing
Jun 28 15:35:47 hal /netbsd: i4b-L2-i4b_tei_assign: tx TEI ID_Request
Jun 28 15:35:47 hal /netbsd: i4b-L2-i4b_T202_start: unit 0
Jun 28 15:35:47 hal /netbsd: i4b-L1-ph_data_req: ISAC_TX_ACTIVE set
Jun 28 15:35:47 hal /netbsd: i4b-L3-T303_start: cr = 53
Jun 28 15:35:47 hal /netbsd: i4b-L4-i4biproutput: ipr0: send dial request message!
Jun 28 15:35:47 hal /netbsd: i4b-L4-i4biproutput: ipr0: setting dial state to ST_DIALING
Jun 28 15:35:47 hal /netbsd: i4b-L4-i4biprstart: ipr0: not connected!
Jun 28 15:35:46 hal isdnd[353]: DMN rate=150 sec/unit (day=0, beg=5, end=21, current=15)
Jun 28 15:35:46 hal isdnd[353]: CHD 00001 dialing out from xxxxxxxx to yyyyyyyy
Jun 28 15:35:48 hal /netbsd: i4b-L4-i4biproutput: ipr0: send dial request message!
Jun 28 15:35:48 hal /netbsd: i4b-L4-i4biproutput: ipr0: setting dial state to ST_DIALING
Jun 28 15:35:48 hal /netbsd: i4b-L4-i4biprstart: ipr0: not connected!
Jun 28 15:35:48 hal /netbsd: i4b-L1-timer3_expired: state = F4 Awaiting Signal
Jun 28 15:35:48 hal /netbsd: i4b-L1-isic_next_state: FSM event [EV_T3 Timer 3 expired]: [F
4 Awaiting Signal => F3 Deactivated]
=================================================================
and some packets later
=================================================================
Jun 28 15:35:57 hal /netbsd: i4b-L1-F_AR: FSM function F_AR executing
Jun 28 15:35:57 hal /netbsd: i4b-L1-isic_isac_l1_cmd: tx AR8 in state F3 Deactivated
Jun 28 15:35:57 hal /netbsd: i4b-L1-T3_start: state = F3 Deactivated
Jun 28 15:35:57 hal /netbsd: i4b-L1-ph_data_req: No Space in TX FIFO, state = F4 Awaiting
Signal
Jun 28 15:35:58 hal /netbsd: i4b-L1-timer3_expired: state = F4 Awaiting Signal
Jun 28 15:35:58 hal /netbsd: i4b-L1-isic_next_state: FSM event [EV_T3 Timer 3 expired]: [F
4 Awaiting Signal => F3 Deactivated]
Jun 28 15:35:58 hal /netbsd: i4b-L1-F_T3ex: FSM function F_T3ex executing
Jun 28 15:35:58 hal /netbsd: i4b-L2-i4b_ph_deactivate_ind: unit 0 deactivated
Jun 28 15:35:58 hal /netbsd: i4b-L2-i4b_T202_timeout: unit 0, N202 = 3
Jun 28 15:35:58 hal /netbsd: i4b-L2-i4b_tei_assign: tx TEI ID_Request
Jun 28 15:35:58 hal /netbsd: i4b-L2-i4b_T202_start: unit 0
Jun 28 15:35:58 hal /netbsd: i4b-L1-ph_data_req: still in state F3!
Jun 28 15:35:59 hal /netbsd: i4b-L1-ph_activate_req: unit = 0
Jun 28 15:35:59 hal /netbsd: i4b-L1-isic_next_state: FSM event [EV_PHAR PH_ACT_REQ]: [F3 D
eactivated => F4 Awaiting Signal]
=================================================================
Thanks for all help
--
Mit freundlichen Gruessen/Best regards
Andreas Lohrum, ConSol* email: andreas.lohrum@consol.de
z.Zt.: Hypobank Muenchen phone: +49 89 924-46668
Apianstr. 14 email: andreas.lohrum@ae3.hypo.de
D-85774 Unterfoehring mobile: +49 172 8935 476
ConSol's 'CallManager*'(TM) is IBM's "Solution of the year 1997"
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?13720.44737.132122.290280>