Date: Wed, 21 May 2014 07:13:46 -0700 (PDT) From: Andy <luxinweiandy@hotmail.com> To: freebsd-wireless@freebsd.org Subject: fail to do the bridge on tdma by using the scripts under net80211 Message-ID: <1400681626433-5914139.post@n5.nabble.com>
next in thread | raw e-mail | index | archive | help
Recently I just wanna try the TDMA wireless network of FreeBSD. My network is simple, just three computers, two connect by TDMA each other(one master, one slave) and another computer connect the TDMA master computer by ethernet port(wired). For start, I just run the scripts setup.tdma-master and setup.tdma-slave(under /usr/src/tools/tools/net80211/scripts) on each TDMA computer. These two scripts will create two tdma nodes with both bridged to each wired NIC. After this, I think I could ping between these two bridge but it doesn't work!! At First I think the problem is happen in TDMA connection, so I set IP addresses for two TDMA nodes, and I can ping between them, so the problem maybe in the bridge setting. But looking into the scripts, I find there is nothing differece with bridge setting in the handbook. Am I missing something important here? I would greatly appreciate it if anyone could offer some information on these questions! Following are some of my network setting on the master node: <http://freebsd.1045724.n5.nabble.com/file/n5914139/ifconfig_output_master.png>; <http://freebsd.1045724.n5.nabble.com/file/n5914139/netstat_output_master.png>; on the slave node: wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 00:15:6d:6a:a6:bd inet6 fe80::215:6dff:fe6a:a6bd%wlan0 prefixlen 64 scopeid 0x4 inet 192.168.4.2 netmask 0xffffff00 broadcast 192.168.4.255 nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> media: IEEE 802.11 Wireless Ethernet OFDM/24Mbps mode 11g <flag0,adhoc> status: running ssid freebsd+tdma channel 10 (2457 MHz 11g) bssid ec:88:8f:c4:40:18 country US ecm authmode OPEN privacy OFF txpower 21 ucastrate 24 mcastrate 24 scanvalid 60 protmode CTS wme burst tdmaslot 1 tdmaslotcnt 2 tdmaslotlen 10000 tdmabintval 5 bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether 02:84:ff:8d:58:00 inet 192.168.2.2 netmask 0xffffff00 broadcast 192.168.2.255 nd6 options=1<PERFORMNUD> id 00:00:00:00:00:00 priority 32768 hellotime 2 fwddelay 15 maxage 20 holdcnt 6 proto rstp maxaddr 2000 timeout 1200 root id 00:00:00:00:00:00 priority 32768 ifcost 0 port 0 member: wlan0 flags=143<LEARNING,DISCOVER,AUTOEDGE,AUTOPTP> ifmaxaddr 0 port 4 priority 128 path cost 370370 Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire 127.0.0.1 link#3 UH 0 0 lo0 192.168.2.0/24 link#5 U 0 1 bridge 192.168.2.2 link#5 UHS 0 0 lo0 192.168.4.0/24 link#4 U 0 4 wlan0 192.168.4.2 link#4 UHS 0 0 lo0 -- View this message in context: http://freebsd.1045724.n5.nabble.com/fail-to-do-the-bridge-on-tdma-by-using-the-scripts-under-net80211-tp5914139.html Sent from the freebsd-wireless mailing list archive at Nabble.com.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1400681626433-5914139.post>