Date: Tue, 15 Oct 2024 22:38:28 +0000 (GMT) From: jenkins-admin@FreeBSD.org To: dev-ci@FreeBSD.org Cc: jenkins-admin@FreeBSD.org Subject: FreeBSD-main-amd64-test - Build #25592 - Failure Message-ID: <141420646.1647.1729031913111@jenkins.ci.freebsd.org> In-Reply-To: <1132398916.1633.1729029388231@jenkins.ci.freebsd.org> References: <1132398916.1633.1729029388231@jenkins.ci.freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
------=_Part_1646_777301321.1729031909001 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable FreeBSD-main-amd64-test - Build #25592 (ce4cc746bb4171a131ab9099947a500c0de= 18ff4) - Failure Build information: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25592= / Full change log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25592/c= hanges Full build log: https://ci.FreeBSD.org/job/FreeBSD-main-amd64-test/25592/co= nsole Status explanation: "Failure" - the build is suspected being broken by the following changes "Still Failing" - the build has not been fixed by the following changes and this is a notification to note that these changes have not been fully tested by the CI system Change summaries: (Those commits are likely but not certainly responsible) No changes The end of the build log: [...truncated 4.07 MiB...] epair0b: link state changed to UP epair1a: Ethernet address: 02:28:77:f6:41:0a epair1b: Ethernet address: 02:28:77:f6:41:0b epair1a: link state changed to UP epair1b: link state changed to UP bridge0: link state changed to UP epair0a: promiscuous mode enabled epair1a: promiscuous mode enabled epair0b: promiscuous mode enabled carp: 1@epair0b: INIT -> BACKUP (initialization complete) epair1b: promiscuous mode enabled carp: 1@epair1b: INIT -> BACKUP (initialization complete) carp: 1@epair0b: BACKUP -> MASTER (master timed out) epair1a: promiscuous mode disabled epair0a: promiscuous mode disabled bridge0: link state changed to DOWN epair0a: link state changed to DOWN carp: 1@epair0b: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0b: promiscuous mode disabled epair1a: link state changed to DOWN carp: 1@epair1b: BACKUP -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair1b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair1b: promiscuous mode disabled passed [6.483s] sys/netinet/carp:vrrp_v6 -> bridge0: Ethernet address: 58:9c:fc:10:ff:d3 epair0a: Ethernet address: 02:2a:7c:d7:d0:0a epair0b: Ethernet address: 02:2a:7c:d7:d0:0b epair0a: link state changed to UP epair0b: link state changed to UP epair1a: Ethernet address: 02:e8:9d:2a:1a:0a epair1b: Ethernet address: 02:e8:9d:2a:1a:0b epair1a: link state changed to UP epair1b: link state changed to UP bridge0: link state changed to UP epair0a: promiscuous mode enabled epair1a: promiscuous mode enabled epair0b: promiscuous mode enabled carp: 1@epair0b: INIT -> BACKUP (initialization complete) epair1b: promiscuous mode enabled carp: 1@epair1b: INIT -> BACKUP (initialization complete) carp: 1@epair0b: BACKUP -> MASTER (master timed out) epair1a: promiscuous mode disabled epair0a: promiscuous mode disabled bridge0: link state changed to DOWN epair0a: link state changed to DOWN carp: 1@epair0b: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0b: promiscuous mode disabled epair1a: link state changed to DOWN carp: 1@epair1b: BACKUP -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair1b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair1b: promiscuous mode disabled passed [6.529s] sys/netinet/carp.py:TestCarp::test_source_mac -> epair0a: Ethernet addres= s: 02:0c:ca:9e:06:0a epair0b: Ethernet address: 02:0c:ca:9e:06:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: promiscuous mode enabled carp: 1@epair0a: INIT -> BACKUP (initialization complete) carp: 1@epair0a: BACKUP -> MASTER (master timed out) carp: 1@epair0a: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0a: link state changed to DOWN epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0a: promiscuous mode disabled passed [4.694s] sys/netinet/carp.py:TestCarp::test_source_mac_vrrp -> epair0a: Ethernet a= ddress: 02:5b:a6:ad:19:0a epair0b: Ethernet address: 02:5b:a6:ad:19:0b epair0a: link state changed to UP epair0b: link state changed to UP lo0: link state changed to UP epair0a: promiscuous mode enabled carp: 1@epair0a: INIT -> BACKUP (initialization complete) tun0: loop detected carp: 1@epair0a: BACKUP -> MASTER (master timed out) carp: 1@epair0a: MASTER -> INIT (hardware interface down) carp: demoted by 240 to 240 (interface down) epair0a: link state changed to DOWN epair0b: link state changed to DOWN carp: demoted by -240 to 0 (vhid removed) epair0a: promiscuous mode disabled passed [5.152s] sys/netinet/divert:ipdivert_ip_input_local_success -> epair0a: Ethernet a= ddress: 02:50:47:a2:7f:0a epair0b: Ethernet address: 02:50:47:a2:7f:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [1.202s] sys/netinet/divert:ipdivert_ip_output_remote_success -> epair0a: Ethernet= address: 02:78:b4:49:24:0a epair0b: Ethernet address: 02:78:b4:49:24:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0b: link state changed to DOWN epair0a: link state changed to DOWN passed [1.168s] sys/netinet/fibs:fibs_ifroutes1_success -> epair0a: Ethernet address: 02:= 42:f9:31:0a:0a epair0b: Ethernet address: 02:42:f9:31:0a:0b epair0a: link state changed to UP epair0b: link state changed to UP epair0a: link state changed to DOWN epair0b: link state changed to DOWN passed [0.129s] sys/netinet/fibs_test:arpresolve_checks_interface_fib -> skipped: firewal= ls interfere with this test [0.043s] sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet -> = tap0: Ethernet address: 58:9c:fc:10:ff:9b tap1: Ethernet address: 58:9c:fc:10:ff:be passed [0.069s] sys/netinet/fibs_test:default_route_with_multiple_fibs_on_same_subnet_inet6= -> tap0: Ethernet address: 58:9c:fc:10:ff:9b tap1: Ethernet address: 58:9c:fc:10:ff:be passed [0.057s] sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib -> ta= p0: Ethernet address: 58:9c:fc:10:ff:9b passed [0.058s] sys/netinet/fibs_test:loopback_and_network_routes_on_nondefault_fib_inet6 = -> tap0: Ethernet address: 58:9c:fc:10:ff:9b passed [0.059s] sys/netinet/fibs_test:same_ip_multiple_ifaces -> tap0: Ethernet address: = 58:9c:fc:10:ff:9b tap1: Ethernet address: 58:9c:fc:10:ff:be tap2: Ethernet address: 58:9c:fc:10:ff:be tap3: Ethernet address: 58:9c:fc:10:ff:a5 expected_failure: kern/189088 Assigning the same IP to multiple interfaces = in different FIBs creates a host route for only one: atf-check failed; see = the output of the test for details [0.078s] sys/netinet/fibs_test:same_ip_multiple_ifaces_fib0 -> tap0: Ethernet addr= ess: 58:9c:fc:10:ff:9b tap1: Ethernet address: 58:9c:fc:10:ff:be tap2: Ethernet address: 58:9c:fc:10:ff:be tap3: Ethernet address: 58:9c:fc:10:ff:a5 passed [0.058s] sys/netinet/fibs_test:same_ip_multiple_ifaces_inet6 -> tap0: Ethernet add= ress: 58:9c:fc:10:ff:9b tap1: Ethernet address: 58:9c:fc:10:ff:be tap0: Ethernet address: 58:9c:fc:10:ff:9b tap1: Ethernet address: 58:9c:fc:10:ff:be passed [0.120s] sys/netinet/fibs_test:slaac_on_nondefault_fib6 -> skipped: firewalls inte= rfere with this test [0.041s] sys/netinet/fibs_test:subnet_route_with_multiple_fibs_on_same_subnet -> t= ap0: Ethernet address: 58:9c:fc:10:ff:9b Fatal trap 9: general protection fault while in kernel mode cpuid =3D 1; apic id =3D 01 instruction pointer=09=3D 0x20:0xffffffff82911666 stack pointer=09 =3D 0x28:0xfffffe008e598840 frame pointer=09 =3D 0x28:0xfffffe008e598850 code segment=09=09=3D base 0x0, limit 0xfffff, type 0x1b =09=09=09=3D DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags=09=3D interrupt enabled, resume, IOPL =3D 0 current process=09=09=3D 0 (netlink_socket (PID) rdi: fffffe00111df7f0 rsi: 0000000000000004 rdx: ffffffff8294649c rcx: 0000000000000183 r8: fffff801361e1000 r9: fffff801361e1000 rax: deadc0dedeadc0de rbx: fffff801911deb80 rbp: fffffe008e598850 r10: 0000000000000000 r11: 0000000000000004 r12: fffff801404a8e10 r13: fffff8000352ddc0 r14: fffff801911dea00 r15: fffff801911deb80 trap number=09=09=3D 9 panic: general protection fault cpuid =3D 1 time =3D 1729031906 KDB: stack backtrace: db_trace_self_wrapper() at db_trace_self_wrapper+0x2b/frame 0xfffffe008e598= 580 vpanic() at vpanic+0x13f/frame 0xfffffe008e5986b0 panic() at panic+0x43/frame 0xfffffe008e598710 trap_fatal() at trap_fatal+0x40b/frame 0xfffffe008e598770 calltrap() at calltrap+0x8/frame 0xfffffe008e598770 --- trap 0x9, rip =3D 0xffffffff82911666, rsp =3D 0xfffffe008e598840, rbp = =3D 0xfffffe008e598850 --- sctp_add_ifa_to_ifn() at sctp_add_ifa_to_ifn+0x46/frame 0xfffffe008e598850 sctp_add_addr_to_vrf() at sctp_add_addr_to_vrf+0x432/frame 0xfffffe008e5988= c0 sctp_addr_change() at sctp_addr_change+0xde/frame 0xfffffe008e598910 rt_addrmsg() at rt_addrmsg+0x121/frame 0xfffffe008e5989e0 in_addprefix() at in_addprefix+0x157/frame 0xfffffe008e598a30 in_control_ioctl() at in_control_ioctl+0xadb/frame 0xfffffe008e598ad0 rtnl_handle_addr() at rtnl_handle_addr+0x40b/frame 0xfffffe008e598cd0 rtnl_handle_message() at rtnl_handle_message+0x195/frame 0xfffffe008e598d30 nl_taskqueue_handler() at nl_taskqueue_handler+0x588/frame 0xfffffe008e598e= 40 taskqueue_run_locked() at taskqueue_run_locked+0x1c2/frame 0xfffffe008e598e= c0 taskqueue_thread_loop() at taskqueue_thread_loop+0xd3/frame 0xfffffe008e598= ef0 fork_exit() at fork_exit+0x82/frame 0xfffffe008e598f30 fork_trampoline() at fork_trampoline+0xe/frame 0xfffffe008e598f30 --- trap 0x747d8898, rip =3D 0, rsp =3D 0x1, rbp =3D 0x3 --- KDB: enter: panic [ thread pid 0 tid 104954 ] Stopped at kdb_enter+0x33: movq $0,0x1056242(%rip) db:0:kdb.enter.panic> show pcpu cpuid =3D 1 dynamic pcpu =3D 0xfffffe008f7c2e00 curthread =3D 0xfffff801361e1000: pid 0 tid 104954 critnest 1 "netlink_s= ocket (PID" curpcb =3D 0xfffff801361e1520 fpcurthread =3D none idlethread =3D 0xfffff8010260a000: tid 100004 "idle: cpu1" self =3D 0xffffffff82411000 curpmap =3D 0xffffffff81b9be30 tssp =3D 0xffffffff82411384 rsp0 =3D 0xfffffe008e599000 kcr3 =3D 0x800000000238c002 ucr3 =3D 0xffffffffffffffff scr3 =3D 0x1406d9fc8 gs32p =3D 0xffffffff82411404 ldt =3D 0xffffffff82411444 tss =3D 0xffffffff82411434 curvnet =3D 0xfffff800030edf00 spin locks held: db:0:kdb.enter.panic> reset Uptime: 40m47s + rc=3D0 + echo 'bhyve return code =3D 0' bhyve return code =3D 0 + sudo /usr/sbin/bhyvectl '--vm=3Dtestvm-main-amd64-25592' --destroy + sh -ex freebsd-ci/scripts/test/extract-meta.sh + METAOUTDIR=3Dmeta-out + rm -fr meta-out + mkdir meta-out + tar xvf meta.tar -C meta-out x ./ x ./disable-dtrace-tests.sh x ./run.sh x ./run-kyua.sh x ./disable-zfs-tests.sh x ./auto-shutdown x ./disable-notyet-tests.sh + rm -f test-report.txt test-report.xml + mv 'meta-out/test-report.*' . mv: rename meta-out/test-report.* to ./test-report.*: No such file or direc= tory + report=3Dtest-report.xml + [ -e freebsd-ci/jobs/FreeBSD-main-amd64-test/xfail-list -a -e test-report= .xml ] + rm -f disk-cam + jot 5 + rm -f disk1 + rm -f disk2 + rm -f disk3 + rm -f disk4 + rm -f disk5 + rm -f disk-test.img [PostBuildScript] - [INFO] Executing post build scripts. [FreeBSD-main-amd64-test] $ /bin/sh -xe /tmp/jenkins3421322760917190430.sh + ./freebsd-ci/artifact/post-link.py Post link: {'job_name': 'FreeBSD-main-amd64-test', 'commit': 'ce4cc746bb417= 1a131ab9099947a500c0de18ff4', 'branch': 'main', 'target': 'amd64', 'target_= arch': 'amd64', 'link_type': 'latest_tested'} "Link created: main/latest_tested/amd64/amd64 -> ../../ce4cc746bb4171a131ab= 9099947a500c0de18ff4/amd64/amd64\n" Recording test results ERROR: Step =E2=80=98Publish JUnit test result report=E2=80=99 failed: No t= est report files were found. Configuration error? Checking for post-build Performing post-build step Checking if email needs to be generated Email was triggered for: Failure - Any Sending email for trigger: Failure - Any Sending mail from default account using System Admin e-mail address ------=_Part_1646_777301321.1729031909001--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?141420646.1647.1729031913111>