Date: Mon, 19 Jul 1999 23:04:40 +0300 (EET DST) From: Tomi Vainio <tomppa@sun.fi> To: freebsd-current@freebsd.org Subject: Unusable PS/2 mouse Message-ID: <14227.34008.442998.44420@sun9.sun.fi>
next in thread | raw e-mail | index | archive | help
I have tried to use Logitech PS/2 wheel mouse (model M-S48) but
support has been broken for a long time now. I have binded fvwm menus
to mouse + keyboard combinations. If I press keyboard and move mouse
at the time I will always get these errors and keyboard is lost after
this.
Jun 20 21:48:36 cat /kernel: psmintr: out of sync (0000 != 0008).
Jun 20 21:53:26 cat /kernel: psmintr: out of sync (0000 != 0008).
Jun 20 21:53:26 cat /kernel: psmintr: out of sync (0000 != 0008).
If I disable sync check (psm flags 0x100) cursor starts warping around
the screen. Only way to use X at all is to disable sync and not to
use keyboard and mouse at the same time.
Tomppa
--- clip clip ---
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #21: Mon Jul 19 22:21:51 EEST 1999
tomppa@cat.bert.pp.clinet.fi:/f/local/sup/4.0/sys/compile/CAT
Calibrating clock(s) ... TSC clock: 232519399 Hz, i8254 clock: 1193141 Hz
Timecounter "i8254" frequency 1193141 Hz
CPU: Pentium Pro (232.52-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV>
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009ffff, 651264 bytes (159 pages)
0x00310000 - 0x03ff7fff, 63864832 bytes (15592 pages)
fb: new array size 4
avail memory = 61865984 (60416K bytes)
Found BIOS32 Service Directory header at 0xc00f99e0
Entry = 0xf0430 (0xc00f0430) Rev = 0 Len = 1
PCI BIOS entry at 0x460
DMI header at 0xc00f51a0
Version 2.0
Table at 0xf51ba, 30 entries, 974 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fcee0
Preloaded elf kernel "kernel" at 0xc02f7000.
Pentium Pro MTRR support enabled, default memory type is uncacheable
Initializing PnP override table
Probing for PnP devices:
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
No Plug-n-Play devices were found
pci_open(1): mode 1 addr port (0x0cf8) is 0x80005840
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
npx0: <math processor> on motherboard
npx0: INT 16 interface
apm0: <APM BIOS> on motherboard
apm: found APM BIOS version 1.2
pci_open(1): mode 1 addr port (0x0cf8) is 0x00000000
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=12378086)
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x1237, revid=0x02
class=06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7000, revid=0x01
class=06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
found-> vendor=0x8086, dev=0x7010, revid=0x00
class=01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 4, range 32, base 0000e800, size 4
found-> vendor=0x1011, dev=0x0002, revid=0x23
class=02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=14
map[0]: type 4, range 32, base 0000e000, size 7
map[1]: type 1, range 32, base e3800000, size 7
found-> vendor=0x109e, dev=0x0350, revid=0x11
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=15
map[0]: type 3, range 32, base e7800000, size 12
found-> vendor=0x102b, dev=0x051b, revid=0x00
class=03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=9
map[0]: type 3, range 32, base e6000000, size 24
map[1]: type 1, range 32, base e3000000, size 14
map[2]: type 1, range 32, base e2800000, size 23
found-> vendor=0x9004, dev=0x8178, revid=0x00
class=01-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
map[0]: type 4, range 32, base 0000d800, size 8
map[1]: type 1, range 32, base e2000000, size 12
found-> vendor=0x121a, dev=0x0002, revid=0x02
class=04-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[0]: type 3, range 32, base e4000000, size 24
pci0: <PCI bus> on pcib0
WARNING: "bktr" is usurping "bktr"'s cdevsw[]
isab0: <Intel 82371SB PCI to ISA bridge> at device 1.0 on pci0
I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks
Extended BIOS: disabled
Lower BIOS: disabled
Coprocessor IRQ13: enabled
Mouse IRQ12: disabled
Interrupt Routing: A: IRQ11, B: IRQ9, C: IRQ15, D: IRQ14
MB0: disabled, MB1:
chip1: <Intel PIIX3 IDE controller> at device 1.1 on pci0
Primary IDE: disabled
Secondary IDE: disabled
de0: <Digital 21040 Ethernet> irq 14 at device 9.0 on pci0
de0: 21040 [10Mb/s] pass 2.3
de0: address 00:40:c7:94:07:97
bktr0: <BrookTree 848> irq 15 at device 10.0 on pci0
bti2c0: <bt848 Hard/Soft I2C controller>
iicbb0: <I2C generic bit-banging driver> on bti2c0
iicbus0: <Philips I2C bus> on iicbb0 master-only
iicsmb0: <I2C to SMB bridge> on iicbus0
smbus0: <System Management Bus> on iicsmb0
smb0: <SMBus general purpose I/O> on smbus0
WARNING: "iic" is usurping "iic"'s cdevsw[]
iic0: <I2C general purpose I/O> on iicbus0
smbus1: <System Management Bus> on bti2c0
smb1: <SMBus general purpose I/O> on smbus1
brooktree0: PCI bus latency is 32.
bktr0: buffer size 3555328, addr 0x530000
bktr: GPIO is 0x00fffffb
Hauppauge Model 56304 D
Hauppauge WinCast/TV, Temic PAL tuner.
vga-pci0: <Matrox MGA 2164W graphics accelerator> irq 9 at device 11.0 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> irq 11 at device 12.0 on pci0
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable is present, internal 68 cable not present
ahc0: external cable is present
ahc0: BIOS eeprom is present
ahc0: High byte termination Enabled
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
ahc0: Downloading Sequencer Program... 411 instructions downloaded
isa0: <ISA bus> on motherboard
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> at fdc0 drive 0
pas0 at port 0x388 irq 10 drq 5 on isa0
snd0: <Pro AudioSpectrum 16 rev 0>
sb0 at port 0x220 irq 7 drq 1 on isa0
snd0: <SoundBlaster 2.0>
WARNING: "snd" is usurping "snd"'s cdevsw[]
isa_compat: didn't get ports for opl
opl0 at port 0x388 on isa0
isa_compat: didn't get ports for opl
snd0: <Yamaha OPL3 FM>
WARNING: "snd" is usurping "snd"'s cdevsw[]
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
psm0: current command byte:0047
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:ffffffff
psm: status ffffffff c030bee4 c07c14c0
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 1a 03 3c
psm: status 10 00 64
psm: data c8 c6 51
psm: data 08 00 00
psm: status 00 03 64
psm0: <PS/2 Mouse> flags 0x100 irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-51, 3 buttons
psm0: config:00000100, flags:00000000, packet size:3
psm0: syncmask:00, syncbits:00
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 60 4f 50 83 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: <System console> on isa0
sc0: VGA <4 virtual consoles, flags=0x200>
sc0: fb0 kbd0
ppc: parallel port found at 0x378
ppc0: 0x87 - 0xc 0x0 0xff 0x10 0x0 0x0 0x5 0x0 0x0 0x8a 0x1f 0xc 0x28 0xab 0x0 0x0 0x0 0x0 0x0 0x0 0x7 0x0 0x0 0xfc 0x0 0x1 0xde 0xfe 0xbe 0x23 0x25 0x43 0x62
ppc0: ECP+EPP SPP
ppc0 at port 0x378-0x37f irq 7 drq 3 on isa0
ppc0: W83877F chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
using shared irq7.
joy0 at port 0x201 on isa0
joy0: joystick
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 on isa0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
BIOS Geometries:
0:022afe3f 0..554=555 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0104fe3f 0..260=261 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Waiting 8 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
de0: enabling 10baseT port
ahc0: Selection Timeout on A:1. 1 SCBs aborted
ahc0: Selection Timeout on A:3. 1 SCBs aborted
ahc0: Selection Timeout on A:4. 1 SCBs aborted
ahc0: Selection Timeout on A:5. 1 SCBs aborted
ahc0: Selection Timeout on A:8. 1 SCBs aborted
ahc0: Selection Timeout on A:9. 1 SCBs aborted
ahc0: Selection Timeout on A:10. 1 SCBs aborted
ahc0: Selection Timeout on A:11. 1 SCBs aborted
ahc0: Selection Timeout on A:12. 1 SCBs aborted
ahc0: Selection Timeout on A:13. 1 SCBs aborted
ahc0: Selection Timeout on A:14. 1 SCBs aborted
ahc0: Selection Timeout on A:15. 1 SCBs aborted
(probe6:ahc0:0:6:0): INQUIRY. CDB: 12 1 80 0 ff 0
(probe6:ahc0:0:6:0): ILLEGAL REQUEST asc:24,0
(probe6:ahc0:0:6:0): Invalid field in CDB
ahc0: target 6 synchronous at 10.0MHz, offset = 0xf
ahc0: target 2 using 16bit transfers
ahc0: target 2 synchronous at 10.0MHz, offset = 0x8
ahc0: target 0 synchronous at 20.0MHz, offset = 0xf
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
pass0: Serial Number RD3C8551
pass0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
pass1 at ahc0 bus 0 target 2 lun 0
pass1: <SEAGATE ST32550W SUN2.1G 0420> Fixed Direct Access SCSI-2 device
pass1: Serial Number 09061315
pass1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
pass2 at ahc0 bus 0 target 6 lun 0
pass2: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device
pass2: 10.000MB/s transfers (10.000MHz, offset 15)
Considering FFS root f/s.
changing root device to da0s3a
da1 at ahc0 bus 0 target 2 lun 0
da1: <SEAGATE ST32550W SUN2.1G 0420> Fixed Direct Access SCSI-2 device
da1: Serial Number 09061315
da1: 20.000MB/s transfers (10.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 2048MB (4194995 512 byte sectors: 255H 63S/T 261C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DDRS-34560 S97B> Fixed Direct Access SCSI-2 device
da0: Serial Number RD3C8551
da0: 20.000MB/s transfers (20.000MHz, offset 15), Tagged Queueing Enabled
da0: 4357MB (8925000 512 byte sectors: 255H 63S/T 555C)
da0s1: type 0x6, start 63, end = 208844, size 208782 : OK
da0s2: type 0x5, start 208845, end = 2313359, size 2104515 : OK
da0s3: type 0xa5, start 2313360, end = 8916074, size 6602715 : OK
da0s5: type 0xb, start 208908, end = 2313359, size 2104452 : OK
start_init: trying /sbin/init
Linux-ELF exec handler installed
(da0:ahc0:0:0:0): tagged openings now 64
(cd0:ahc0:0:6:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ahc0:0:6:0): NOT READY asc:3a,0
(cd0:ahc0:0:6:0): Medium not present
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <PLEXTOR CD-ROM PX-20TS 1.00> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
--
Sun Microsystems Oy PL 102, Niittymäentie 9, 02201 Espoo, Finland
Tomi Vainio (System Support Engineer) +358 9 52556300 hotline
email: Tomi.Vainio@Sun.COM +358 9 52556252 fax
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14227.34008.442998.44420>