Date: Sat, 7 Oct 2000 15:20:31 -0700 (MST) From: John Reynolds <jjreynold@home.com> To: "Kenneth D. Merry" <ken@kdm.org> Subject: Re: what part of the driver locks the CD tray? Message-ID: <14815.41391.607241.353903@whale.home-net> In-Reply-To: <20001005225426.A45446@panzer.kdm.org> References: <14813.21325.718668.456937@whale.home-net> <20001005225426.A45446@panzer.kdm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[ On Thursday, October 5, Kenneth D. Merry wrote: ] > > Yes. To prevent removal: > > camcontrol cmd cd0 -v -c "1e 0 0 0 1 0" > > To allow removal: > > camcontrol cmd cd0 -v -c "1e 0 0 0 0 0" These commands worked for my plain CD-ROM drive on cd0 but did not work for my SCSI CD-RW on cd1 cd1 at ahc0 bus 0 target 4 lun 0 cd1: <YAMAHA CRW4416S 1.0g> Removable CD-ROM SCSI-2 device cd1: 8.333MB/s transfers (8.333MHz, offset 31) cd1: cd present [239755 x 2048 byte records] When I run the "lock" command (s/cd0/cd1), I get: camcontrol: error sending command (pass2:ahc0:0:4:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 (pass2:ahc0:0:4:0): NOT READY asc:3a,1 (pass2:ahc0:0:4:0): Medium not present - tray closed Is the command different for CDRW drives? There is no media in either drive but the command for locking/unlocking on cd0 works regardless of media. Thanks Kenneth, -Jr ps: if I put media into the CD-RW drive and execute the clock command I get this: camcontrol: error sending command (pass2:ahc0:0:4:0): PREVENT ALLOW MEDIUM REMOVAL. CDB: 1e 0 0 0 1 0 (pass2:ahc0:0:4:0): UNIT ATTENTION asc:28,0 pass2:ahc0:0:4:0): Not ready to ready change, medium may have changed ? -- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= John Reynolds Chandler Capabilities Engineering, CDS, Intel Corporation jreynold@sedona.ch.intel.com My opinions are mine, not Intel's. Running jjreynold@home.com FreeBSD 4.1-STABLE. FreeBSD: The Power to Serve. http://members.home.com/jjreynold/ Come join us!!! @ http://www.FreeBSD.org/ =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?14815.41391.607241.353903>