Date: Mon, 02 Jan 2017 22:25:16 +0100 From: swjatoslaw gerus <milstar2@eml.cc> To: Polytropon <freebsd@edvax.de> Cc: freebsd-questions@freebsd.org Subject: To date can use different bsd mode -graph, text , starter , expert -how take from 200 gb,which are not used some 50-80 gb for bsd test ? Message-ID: <1483392316.863972.835284489.2B897A9C@webmail.messagingengine.com> In-Reply-To: <1483389674.854959.835252993.40D1FB46@webmail.messagingengine.com> References: <1483234588.3953682.834028153.34EF2FB6@webmail.messagingengine.com> <20170101032236.58b18351.freebsd@edvax.de> <1483319958.407695.834613121.22D7AD34@webmail.messagingengine.com> <20170102022858.aa354bba.freebsd@edvax.de> <1483378580.815169.835118185.09E0A997@webmail.messagingengine.com> <20170102193911.9bfbb0cb.freebsd@edvax.de> <1483385148.838475.835195569.6E8F7BAE@webmail.messagingengine.com> <20170102210741.02003057.freebsd@edvax.de> <1483389674.854959.835252993.40D1FB46@webmail.messagingengine.com>
next in thread | previous in thread | raw e-mail | index | archive | help
1.To date can use different bsd loader mode -graph,text ,starter ,expert -how take from 200 gb,which are not used some 50-80 gb for bsd test ? limit risk ############# 2. edit partion linux data 153 gb modify system asked about mountpoint ... -- swjatoslaw gerus milstar2@eml.cc On Mon, Jan 2, 2017, at 09:41 PM, swjatoslaw gerus wrote: > extra keyboard not accepted for single user bsd text installer > poweroff poweron > both linux sda1 sda6 recovery mode > poweroff plugin sandisk ,poweron > 2 -single user text > > test extrqa keyboard > extra keyboard accepted > ####################### > > Exist any possbility to check disk from this mode ? > Is this option more suited for single user ? > > > -- > swjatoslaw gerus > milstar2@eml.cc > > On Mon, Jan 2, 2017, at 09:07 PM, Polytropon wrote: > > On Mon, 02 Jan 2017 20:25:48 +0100, swjatoslaw gerus wrote: > > > Why don't you just remove one of the Linux installationy you have? > > > > > > yes ready to perform this taskbut > > > > > > in linux grub 1 installation 32 bit 16.04 sda1 > > > 2 installation 64 bit 16.04 sda6 was made 1 month later after > > > 1 > > > > GRUB will have no problem. So you currently have this layout: > > > > sda1 = Ubuntu 32 Bit > > > > sda6 = Ubuntu 64 Bit > > > > You can easily verify if this is correct: Boot the 1st > > Linux and issue the command "mount": You will see which > > partition it has been mounting as a root partition, for > > example this could be sda1. Then you shut down, boot > > the other installation, issue "mount" again and see that > > the root partition is sda6. Now you know which partition > > corresponds to which Ubuntu version. > > > > If you are unsure, post the full output of the "mount" > > command to the list. For illustration, here's an example > > from a FreeBSD system (note the different names of the > > partitions): > > > > % mount > > /dev/ada0p2 on / (ufs, local, journaled soft-updates) > > > > Look which device is mounted on / (the root partition). > > > > The 64 bit version is the one that you are _not_ using at > > the moment, i. e., the one that doesn't work properly. So > > just remove that partition. You can do it with the manual > > partitioning from within the FreeBSD installer, or using > > gparted from the 32 bit Ubuntu. > > > > > > > > > bsd loader notation another > > > > Yes, that is obvious and has already been explained. > > > > > > > > > which of is first ? would try to check bsd loader > > > > The FreeBSD loader won't be much help here, it's not even > > installed. > > > > > > > > > but would not possible if erase installation 1 grub would allocate > > > all disk to 2 linux ? > > > > GRUB is a boot manager, it does not magically assign partitions. > > It just lets you select from what is present on the disk. After > > you've removed one partition, the GRUB loader screen will have > > one entry less, or the "remaining" entry just won't work. > > > > Again: Make sure the space freed by removing one partition is > > not being "formatted" afterwards. You can check that with the > > fdisk program: One partition (sda1, for example) is assigned > > to Linux, the remining disk space is _not_ assigned. It will > > then be listed as free (available) space in the FreeBSD installer. > > The installer will put FreeBSD into that space. > > > > Later on, when you're ready to say goodbye to the troublesome > > Linux, you can delete that partition, and use it as a data > > partition (or maybe /home partition) for FreeBSD. Or you keep > > it as a "backup system", just in case. > > > > > > > > > > -- > > Polytropon > > Magdeburg, Germany > > Happy FreeBSD user since 4.0 > > Andra moi ennepe, Mousa, ... > > -- > http://www.fastmail.com - The professional email service > -- http://www.fastmail.com - A fast, anti-spam email service.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1483392316.863972.835284489.2B897A9C>