Date: Mon, 24 Sep 2001 08:14:45 -0400 From: "Viren R. Shah" <viren@cigital.com> To: Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> Cc: freebsd-current@freebsd.org Subject: Re: PS/2 mouse (psm0) is not detected with recent -current Message-ID: <15279.9141.49301.259839@aop.cigital.com> In-Reply-To: <200109230647.PAA19004@zodiac.mech.utsunomiya-u.ac.jp> References: <15275.36408.294384.257898@jabberwock.cigital.com> <200109230647.PAA19004@zodiac.mech.utsunomiya-u.ac.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
>>>>> "Kazu" == Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp> writes:
>> which Kazutaka YOKOTA suggested in a different thread might indicate
>> some weirdness. Any suggestions? I tried setting "acpi_load=NO" at
>> boot,but the acpi module gets loaded anyway.
Kazu> Um, you should have typed "unset acpi_load" at the loader prompt
Kazu> to disable the acpi module...
Kazu> Please do
Kazu> unset acpi_load
Kazu> boot -v
Kazu> at the loader prompt and send me dmesg's output.
Here's the verbose boot output after typing in "unset acpi_load". The
mouse is now recognized:
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Fri Sep 21 14:00:04 EDT 2001
vshah@jabberwock:/home/FreeBSD/src/sys/i386/compile/VORPAL
Calibrating clock(s) ... TSC clock: 797902982 Hz, i8254 clock: 1193091 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC" frequency 797967435 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.97-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 402391040 (392960K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003e0000 - 0x17fb7fff, 398295040 bytes (97240 pages)
avail memory = 387473408 (378392K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fda60
bios32: Entry = 0xfda74 (c00fda74) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xda95
pnpbios: Found PnP BIOS data at 0xc00f2c10
pnpbios: Entry = f0000:24ca Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel/kernel" at 0xc03b9000.
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
random: <entropy source>
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000058
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=25018086)
Using $PIR table, 11 entries at 0xc00f3190
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x2501, revid=0x04
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
found-> vendor=0x8086, dev=0x250f, revid=0x04
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x2418, revid=0x02
bus=0, slot=30, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found-> vendor=0x8086, dev=0x2410, revid=0x02
bus=0, slot=31, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base 0000ffa0, size 4, enabled
found-> vendor=0x8086, dev=0x2411, revid=0x02
bus=0, slot=31, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base 0000ef80, size 5, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
bus=0, slot=31, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=10
map[20]: type 4, range 32, base 0000efa0, size 4, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
bus=0, slot=31, func=3
class=0c-05-00, hdrtype=0x00, mfdev=0
intpin=b, irq=9
pci0: <PCI bus> on pcib0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xf000-0xfff
pcib1: memory decode 0xfc900000-0xfe9fffff
pcib1: prefetched decode 0xe4600000-0xf46fffff
pci1: physical bus=1
map[10]: type 1, range 32, base fd000000, size 24, enabled
map[14]: type 3, range 32, base e8000000, size 27, enabled
found-> vendor=0x10de, dev=0x0100, revid=0x10
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 1 supports D0 D3 current D0
pci1: <PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pcib2: <PCI-PCI bridge> at device 30.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xd000-0xdfff
pcib2: memory decode 0xfea00000-0xfeafffff
pcib2: prefetched decode 0xf4700000-0xf47fffff
pci2: physical bus=2
map[10]: type 4, range 32, base 0000dc00, size 7, enabled
map[14]: type 1, range 32, base feaffc00, size 7, enabled
found-> vendor=0x10b7, dev=0x9200, revid=0x78
bus=2, slot=8, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base fea80000, size 18, enabled
map[14]: type 4, range 32, base 0000dff0, size 3, enabled
map[18]: type 4, range 32, base 0000dfe0, size 3, enabled
found-> vendor=0x12eb, dev=0x0002, revid=0xfe
bus=2, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=0
intpin=a, irq=10
powerspec 1 supports D0 D2 D3 current D0
pci2: <PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f irq 11 at device 8.0 on pci2
pcib2: device xl0 requested decoded I/O range 0xdc00-0xdc7f
xl0: Ethernet address: 00:01:03:1d:d6:4e
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
pci2: <multimedia, audio> at device 11.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI probe 00 00
ata0-slave: ATAPI probe 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA probe 01 a5
ata0: devices=01
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI probe 14 eb
ata1-slave: ATAPI probe 00 00
ata1: mask=03 stat0=00 stat1=00
ata1: devices=04
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
ata-: ata0 already exists, using ata2 instead
ata-: ata1 already exists, using ata3 instead
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 20 devices, largest 234 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x17fe0000-0x17ff7fff, size=0x18000
PNP0c01: adding fixed memory32 range 0x17ff8000-0x17ffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0x17fc0000-0x17fdffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0x100000-0x17fbffff, size=0x17ec0000
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
pnpbios: handle 2 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x22-0x2d, size=0xc, align=0x1
PNP0c02: adding io range 0x30-0x3f, size=0x10, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1
PNP0c02: adding io range 0xa2-0xbe, size=0x1d, align=0x1
PNP0c02: adding io range 0x400-0x47f, size=0x80, align=0x1
PNP0c02: adding io range 0x540-0x54f, size=0x10, align=0x1
PNP0c02: adding io range 0x500-0x53f, size=0x40, align=0x1
pnpbios: handle 9 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb00000-0xffbfffff, size=0x100000
pnpbios: handle 10 device ID INT0800 (0008d425)
PNP0c02: adding io range 0x800-0x87f, size=0x80, align=0x1
pnpbios: handle 11 device ID PNP0c02 (020cd041)
pnpbios: handle 12 device ID PNP0c02 (020cd041)
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
pnpbios: handle 14 device ID PNP0501 (0105d041)
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
pnpbios: handle 17 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
pnpbios: handle 18 device ID PNP0f13 (130fd041)
pnpbios: handle 19 device ID PNP0a03 (030ad041)
sc-: sc0 already exists, using sc1 instead
vga-: vga0 already exists, using vga1 instead
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd07ff on isa0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd1: unable to allocate IRQ
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-50, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0 failed to probe on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x1 0x1 0x1 0x1
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc1: no video adapter found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb00000-0xffbfffff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: faith0 attached
bpf: lo0 attached
ad0: success setting UDMA4 on Intel chip
Creating DISK ad0
ad0: <QUANTUM FIREBALLP LM30.0/A35.0700> ATA-5 disk at ata0-master
ad0: 28629MB (58633344 sectors), 58168 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <CRD-8482B/1.05> CDROM drive at ata1 as master
acd0: read 8250KB/s (32KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked, lock protected
acd0: Medium: no/blank disc
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 58621184, size 58621122 : OK
start_init: trying /sbin/init
splash: image decoder found: logo_saver
Kazu> Thank you,
Kazu> Kazu
Thanks.
Viren
--
Viren R. Shah | "I said it was an upgrade.
Research Associate | I didn't say it was better."
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?15279.9141.49301.259839>