Date: Tue, 10 Jun 2003 13:30:03 -0400 From: Robert Huff <roberthuff@rcn.com> To: freebsd-questions@freebsd.org Subject: USB mouse frozen under X Message-ID: <16102.5531.775457.938144@jerusalem.litteratus.org>
next in thread | raw e-mail | index | archive | help
I'm attempting to switch to an all-USB set-up, and can't get
the mouse to work under X. (I don't use it elsewhere, so moused is
possible, but disfavored.)
Symptoms: X starts; keyboard is fine; mouse cursor appears
but is frozen centered horizontally and about 2/3 of the way down
the screen. Clicking any button has no effect. Changing the mouse
(to a MS IntelliMouse) has no effect.
The _exact_ same set-up works perfectly under WinME.
Appropriate bits of configuration and log files are appended.
I've checked the FAQ and the Handbook, and searched the
archives for the mailing lists and comp.unix.freebsd.misc - found
nothing.
Anyone have a clue what I'm missing?
Robert Huff
**** system hardware probes ****
Jun 6 14:14:36 jerusalem kernel: Copyright (c) 1992-2003 The FreeBSD Project.
Jun 6 14:14:36 jerusalem kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
Jun 6 14:14:36 jerusalem kernel: The Regents of the University of California. All rights reserved.
Jun 6 14:14:36 jerusalem kernel: FreeBSD 5.0-RELEASE-p7 #0: Thu Jun 5 11:13:26 EDT 2003
Jun 6 14:14:36 jerusalem kernel: huff@jerusalem.litteratus.org:/usr/obj/usr/src/sys/JERUSALEM
Jun 6 14:14:36 jerusalem kernel: Preloaded elf kernel "/boot/kernel/kernel" at 0xc04f3000.
Jun 6 14:14:36 jerusalem kernel: Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04f30a8.
Jun 6 14:14:36 jerusalem kernel: Timecounter "i8254" frequency 1193182 Hz
Jun 6 14:14:36 jerusalem kernel: Timecounter "TSC" frequency 2266759588 Hz
Jun 6 14:14:36 jerusalem kernel: CPU: Pentium 4 (2266.76-MHz 686-class CPU)
Jun 6 14:14:36 jerusalem kernel: Origin = "GenuineIntel" Id = 0xf24 Stepping = 4
Jun 6 14:14:36 jerusalem kernel: Features=0x3febfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM>
Jun 6 14:14:36 jerusalem kernel: real memory = 536854528 (511 MB)
Jun 6 14:14:36 jerusalem kernel: avail memory = 516546560 (492 MB)
Jun 6 14:14:36 jerusalem kernel: Initializing GEOMetry subsystem
Jun 6 14:14:36 jerusalem kernel: Pentium Pro MTRR support enabled
Jun 6 14:14:36 jerusalem kernel: npx0: <math processor> on motherboard
Jun 6 14:14:36 jerusalem kernel: npx0: INT 16 interface
Jun 6 14:14:36 jerusalem kernel: acpi0: <ASUS P4S533 > on motherboard
Jun 6 14:14:36 jerusalem kernel: ACPI-0625: *** Info: GPE Block0 defined as GPE0 to GPE15
Jun 6 14:14:36 jerusalem kernel: Using $PIR table, 10 entries at 0xc00f1b20
Jun 6 14:14:36 jerusalem kernel: acpi0: power button is handled as a fixed feature programming model.
Jun 6 14:14:36 jerusalem kernel: Timecounter "ACPI-safe" frequency 3579545 Hz
Jun 6 14:14:36 jerusalem kernel: acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
Jun 6 14:14:36 jerusalem kernel: acpi_cpu0: <CPU> on acpi0
Jun 6 14:14:36 jerusalem kernel: acpi_button0: <Power Button> on acpi0
Jun 6 14:14:36 jerusalem kernel: pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
Jun 6 14:14:36 jerusalem kernel: pci0: <ACPI PCI bus> on pcib0
Jun 6 14:14:36 jerusalem kernel: agp0: <SIS Generic host to PCI bridge> mem 0xf4000000-0xf7ffffff at device 0.0 on pci0
Jun 6 14:14:36 jerusalem kernel: pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
Jun 6 14:14:36 jerusalem kernel: pci1: <ACPI PCI bus> on pcib1
Jun 6 14:14:36 jerusalem kernel: drm0: <Matrox G400/G450 (AGP)> mem 0xf3000000-0xf37fffff,0xf3800000-0xf3803fff,0xfc000000-0xfdffffff irq 11 at device 0.0 on pci1
Jun 6 14:14:36 jerusalem kernel: info: [drm] AGP at 0xf4000000 64MB
Jun 6 14:14:36 jerusalem kernel: info: [drm] Initialized mga 3.0.2 20010321 on minor 0
Jun 6 14:14:37 jerusalem kernel: isab0: <PCI-ISA bridge> at device 2.0 on pci0
Jun 6 14:14:37 jerusalem kernel: isa0: <ISA bus> on isab0
Jun 6 14:14:37 jerusalem kernel: ohci0: <SiS 5571 USB controller> mem 0xf2800000-0xf2800fff irq 5 at device 2.2 on pci0
Jun 6 14:14:37 jerusalem kernel: usb0: OHCI version 1.0, legacy support
Jun 6 14:14:37 jerusalem kernel: usb0: SMM does not respond, resetting
Jun 6 14:14:37 jerusalem kernel: usb0: <SiS 5571 USB controller> on ohci0
Jun 6 14:14:37 jerusalem kernel: usb0: USB revision 1.0
Jun 6 14:14:37 jerusalem kernel: uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jun 6 14:14:37 jerusalem kernel: uhub0: 3 ports with 3 removable, self powered
Jun 6 14:14:37 jerusalem kernel: uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
Jun 6 14:14:37 jerusalem kernel: uhub1: 4 ports with 4 removable, bus powered
Jun 6 14:14:37 jerusalem kernel: ukbd0: Tangtop Generic USBPS2, rev 1.10/0.01, addr 3, iclass 3/1
Jun 6 14:14:37 jerusalem kernel: ums0: vendor 0x0d3d product 0x0001, rev 1.10/0.01, addr 3, iclass 3/1
Jun 6 14:14:37 jerusalem kernel: ums0: 3 buttons and Z dir.
Jun 6 14:14:37 jerusalem kernel: ohci1: <SiS 5571 USB controller> mem 0xf2000000-0xf2000fff irq 9 at device 2.3 on pci0
Jun 6 14:14:37 jerusalem kernel: usb1: OHCI version 1.0, legacy support
Jun 6 14:14:37 jerusalem kernel: usb1: SMM does not respond, resetting
Jun 6 14:14:37 jerusalem kernel: usb1: <SiS 5571 USB controller> on ohci1
Jun 6 14:14:37 jerusalem kernel: usb1: USB revision 1.0
Jun 6 14:14:37 jerusalem kernel: uhub2: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
Jun 6 14:14:37 jerusalem kernel: uhub2: 3 ports with 3 removable, self powered
Jun 6 14:14:37 jerusalem kernel: pci0: <mass storage, ATA> at device 2.5 (no driver attached)
Jun 6 14:14:37 jerusalem kernel: pcm0: <CMedia CMI8738> port 0xa800-0xa8ff at device 5.0 on pci0
Jun 6 14:14:37 jerusalem kernel: pcib0: slot 5 INTA is routed to irq 10
Jun 6 14:14:37 jerusalem kernel: ahc0: <Adaptec 2940 Ultra2 SCSI adapter> port 0xa400-0xa4ff mem 0xf1000000-0xf1000fff irq 10 at device 9.0 on pci0
Jun 6 14:14:37 jerusalem kernel: aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
Jun 6 14:14:37 jerusalem kernel: de0: <Digital 21140 Fast Ethernet> port 0xa000-0xa07f mem 0xf0800000-0xf080007f at device 10.0 on pci0
Jun 6 14:14:37 jerusalem kernel: pcib0: slot 10 INTA is routed to irq 5
Jun 6 14:14:37 jerusalem kernel: de0: ZNYX ZX34X 21140 [10-100Mb/s] pass 1.2
Jun 6 14:14:37 jerusalem kernel: de0: address 00:c0:95:f8:09:c1
Jun 6 14:14:37 jerusalem kernel: de1: <Digital 21140 Fast Ethernet> port 0x9800-0x987f mem 0xf0000000-0xf000007f at device 11.0 on pci0
Jun 6 14:14:37 jerusalem kernel: pcib0: slot 11 INTA is routed to irq 11
Jun 6 14:14:37 jerusalem kernel: de1: ZNYX ZX34X 21140 [10-100Mb/s] pass 1.1
Jun 6 14:14:37 jerusalem kernel: de1: address 00:c0:95:f8:17:af
Jun 6 14:14:37 jerusalem kernel: fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5 irq 6 drq 2 on acpi0
Jun 6 14:14:37 jerusalem kernel: fdc0: FIFO enabled, 8 bytes threshold
Jun 6 14:14:37 jerusalem kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
Jun 6 14:14:37 jerusalem kernel: ppc0 port 0x778-0x77b,0x378-0x37f irq 7 drq 3 on acpi0
Jun 6 14:14:37 jerusalem kernel: ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
Jun 6 14:14:37 jerusalem kernel: ppc0: FIFO with 16/16/16 bytes threshold
Jun 6 14:14:38 jerusalem kernel: plip0: <PLIP network interface> on ppbus0
Jun 6 14:14:38 jerusalem kernel: lpt0: <Printer> on ppbus0
Jun 6 14:14:38 jerusalem kernel: lpt0: Interrupt-driven port
Jun 6 14:14:38 jerusalem kernel: ppi0: <Parallel I/O> on ppbus0
Jun 6 14:14:38 jerusalem kernel: sio0 port 0x3f8-0x3ff irq 4 on acpi0
Jun 6 14:14:38 jerusalem kernel: sio0: type 16550A
Jun 6 14:14:38 jerusalem kernel: sio1 port 0x2f8-0x2ff irq 3 on acpi0
Jun 6 14:14:38 jerusalem kernel: sio1: type 16550A
Jun 6 14:14:38 jerusalem kernel: orm0: <Option ROMs> at iomem 0xcc000-0xd17ff,0xc8000-0xcbfff,0xc0000-0xc7fff on isa0
Jun 6 14:14:38 jerusalem kernel: sc0: <System console> at flags 0x100 on isa0
Jun 6 14:14:38 jerusalem kernel: sc0: VGA <16 virtual consoles, flags=0x300>
Jun 6 14:14:38 jerusalem kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Jun 6 14:14:38 jerusalem kernel: Timecounters tick every 10.000 msec
Jun 6 14:14:38 jerusalem kernel: ipfw2 initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
Jun 6 14:14:38 jerusalem kernel: IPv6 packet filtering initialized, default to accept, logging limited to 100 packets/entry
Jun 6 14:14:38 jerusalem kernel: acpi_cpu: CPU throttling enabled, 8 steps from 100% to 12.5%
Jun 6 14:14:38 jerusalem kernel: de0: enabling 100baseTX port
Jun 6 14:14:38 jerusalem kernel: de1: enabling 100baseTX port
Jun 6 14:14:38 jerusalem kernel: sa0 at ahc0 bus 0 target 2 lun 0
Jun 6 14:14:38 jerusalem kernel: sa0: <DEC DLT2000 15/30 GB 840B> Removable Sequential Access SCSI-2 device
Jun 6 14:14:38 jerusalem kernel: sa0: 5.000MB/s transfers (5.000MHz, offset 15)
Jun 6 14:14:38 jerusalem kernel: de0: link down: cable problem?
Jun 6 14:14:38 jerusalem kernel: da1 at ahc0 bus 0 target 4 lun 0
Jun 6 14:14:38 jerusalem kernel: da1: <SEAGATE ST3610N 9290> Fixed Direct Access SCSI-2 device
Jun 6 14:14:38 jerusalem kernel: da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
Jun 6 14:14:38 jerusalem kernel: da1: 510MB (1046206 512 byte sectors: 64H 32S/T 510C)
Jun 6 14:14:38 jerusalem kernel: da0 at ahc0 bus 0 target 0 lun 0
Jun 6 14:14:38 jerusalem kernel: da0: <IBM DNES-309170W SAH0> Fixed Direct Access SCSI-3 device
Jun 6 14:14:38 jerusalem kernel: da0: 80.000MB/s transfers (40.000MHz, offset 30, 16bit), Tagged Queueing Enabled
Jun 6 14:14:38 jerusalem kernel: da0: 8748MB (17916240 512 byte sectors: 255H 63S/T 1115C)
Jun 6 14:14:38 jerusalem kernel: Mounting root from ufs:/dev/da0s1a
Jun 6 14:14:38 jerusalem kernel: de0: enabling 10baseT port
Jun 6 14:14:38 jerusalem kernel: de1: enabling 100baseTX port
**** kernel module info ****
Huff> kldstat
Id Refs Address Size Name
1 5 0xc0100000 3a63cc kernel
2 1 0xc04a7000 4a6ac acpi.ko
3 1 0xc21dd000 18000 nfsclient.ko
4 1 0xc21fa000 16000 nfsserver.ko
**** XF86COnfig ****
Section "ServerLayout"
Identifier "XFree86 Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
#ection "InputDevice"
# Identifier "IntelliMouse Explorer"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Device" "/dev/ums0"
# Option "Protocol" "IntelliMouse"
# Option "Buttons" "7"
# Option "ZAxisMapping" "6 7"
# Option "Emulate3Buttons"
# Option "ChordMiddle"
#EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/ums0"
# Option "Buttons" "5"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons"
# Option "ChordMiddle"
EndSection
**** exerpt from XF86.0.log ****
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "auto"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: Core Pointer
(**) Option "Device" "/dev/ums0"
(**) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(==) Mouse0: Buttons: 3
(II) Keyboard "Keyboard0" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(II) Server_Terminate keybinding not found
(II) Mouse0: SetupAuto: hw.iftype is 5, hw.model is 0
(II) Mouse0: SetupAuto: protocol is SysMouse
(WW) fcntl(8, O_ASYNC): Inappropriate ioctl for device
(II) 3rd Button detected: disabling emulate3Button
(WW) fcntl(8, O_ASYNC): Inappropriate ioctl for device
(WW) fcntl(8, O_ASYNC): Inappropriate ioctl for device
(WW) fcntl(8, O_ASYNC): Inappropriate ioctl for device
(WW) fcntl(8, O_ASYNC): Inappropriate ioctl for device
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?16102.5531.775457.938144>