Date: Mon, 19 Jul 2004 14:56:16 -0700 From: hoe-waa@hawaii.rr.com To: Anish Mistry <mistry.7@osu.edu> Cc: freebsd-questions@freebsd.org Subject: Re: changing card in a reader (revisited) Message-ID: <161799d1617089.1617089161799d@socal.rr.com>
next in thread | raw e-mail | index | archive | help
From: Anish Mistry <mistry.7@osu.edu> Date: Monday, July 19, 2004 2:29 pm > > On Monday 19 July 2004 05:10 pm, hoe-waa@hawaii.rr.com wrote: > > Aloha > > > > I had previously started a thread with this problem and although I > > received several suggestions the problem was never solved. > > http://lists.freebsd.org/pipermail/freebsd-questions/2004- > June/050819.html> > > Below I have included more information. If I change an 8MB card for > > another 8MB card everything works as it should. If I try a > different size > > card it fails. > > > > In addition, if I boot with no card in the slot, I cannot get a > slice to > > initiate in /dev. i.e. I will see /dev/da0 - /dev/da3. When I > boot with > > a card in the slot I see /dev/da2s1 as seen below. This problem > has been > > reported by others (found through google) but again there was no > solution.> Is there a friend that I am unaware of? > > > > I have tried various attempts with camcontrol without any good > results. If > > I unplug and replug the USB cable both of the above problems are > corrected.> I don't feel that is a viable solution. My wife has > WXP on her computer and > > it will update with the changing of a card. I really need a > friend that > > will rescan or update the USB connection. > > > > Here are the related parts of dmesg.boot. da4 is a thumb drive > and da1-3 > > are the 4 slots of my card reader. The SmartMedia card is in da2. > > > > GEOM: create disk da0 dp=0xc2e44050 > > GEOM: create disk da1 dp=0xc2dacc50 > > GEOM: create disk da2 dp=0xc2e47450 > > GEOM: create disk da3 dp=0xc2e45850 > > GEOM: create disk da4 dp=0xc2e45450 > > da4 at umass-sim1 bus 1 target 0 lun 0 > > da4: <Generic STORAGE DEVICE 1033> Removable Direct Access SCSI- > 0 device > > da4: 1.000MB/s transfers > > da4: 250MB (512000 512 byte sectors: 64H 32S/T 250C) > > da0 at umass-sim0 bus 0 target 0 lun 0 > > da0: <USB2.0 CardReader CF RW 0814> Removable Direct Access SCSI- > 0 device > > da0: 1.000MB/s transfers > > da0: Attempt to query device size failed: NOT READY, Medium not > present> da1 at umass-sim0 bus 0 target 0 lun 1 > > da1: <USB2.0 CardReader SD RW 0814> Removable Direct Access SCSI- > 0 device > > da1: 1.000MB/s transfers > > da1: Attempt to query device size failed: NOT READY, Medium not > present> da2 at umass-sim0 bus 0 target 0 lun 2 > > da2: <USB2.0 CardReader SM RW 0814> Removable Direct Access SCSI- > 0 device > > da2: 1.000MB/s transfers > > da2: 7MB (16000 512 byte sectors: 64H 32S/T 7C) > > da3 at umass-sim0 bus 0 target 0 lun 3 > > da3: <USB2.0 CardReader MS RW 0814> Removable Direct Access SCSI- > 0 device > > da3: 1.000MB/s transfers > > da3: Attempt to query device size failed: NOT READY, Medium not > present> (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 > 0 0 0 0 > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > > (da0:umass-sim0:0:0:0): Medium not present > > (da0:umass-sim0:0:0:0): Unretryable error > > Opened disk da0 -> 6 > > (da0:umass-sim0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0 > > (da0:umass-sim0:0:0:0): CAM Status: SCSI Status Error > > (da0:umass-sim0:0:0:0): SCSI Status: Check Condition > > (da0:umass-sim0:0:0:0): NOT READY asc:3a,0 > > (da0:umass-sim0:0:0:0): Medium not present > > (da0:umass-sim0:0:0:0): Unretryable error > > Opened disk da0 -> 6 > > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > > (da1:umass-sim0:0:0:1): Medium not present > > (da1:umass-sim0:0:0:1): Unretryable error > > Opened disk da1 -> 6 > > (da1:umass-sim0:0:0:1): READ CAPACITY. CDB: 25 20 0 0 0 0 0 0 0 0 > > (da1:umass-sim0:0:0:1): CAM Status: SCSI Status Error > > (da1:umass-sim0:0:0:1): SCSI Status: Check Condition > > (da1:umass-sim0:0:0:1): NOT READY asc:3a,0 > > (da1:umass-sim0:0:0:1): Medium not present > > (da1:umass-sim0:0:0:1): Unretryable error > > Opened disk da1 -> 6 > > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 > > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error > > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition > > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0 > > (da3:umass-sim0:0:0:3): Medium not present > > (da3:umass-sim0:0:0:3): Unretryable error > > Opened disk da3 -> 6 > > (da3:umass-sim0:0:0:3): READ CAPACITY. CDB: 25 60 0 0 0 0 0 0 0 0 > > (da3:umass-sim0:0:0:3): CAM Status: SCSI Status Error > > (da3:umass-sim0:0:0:3): SCSI Status: Check Condition > > (da3:umass-sim0:0:0:3): NOT READY asc:3a,0 > > (da3:umass-sim0:0:0:3): Medium not present > > (da3:umass-sim0:0:0:3): Unretryable error > > Opened disk da3 -> 6 > > > > > > > > %su > > Password: > > hp# ls -l /dev/da* > > crw-r----- 1 root operator 4, 20 Jul 19 06:19 /dev/da0 > > crw-r----- 1 root operator 4, 21 Jul 19 06:19 /dev/da1 > > crw-r----- 1 root operator 4, 22 Jul 19 06:19 /dev/da2 > > crw-rw---- 1 robert robert 4, 25 Jul 19 06:19 /dev/da2s1 > > crw-r----- 1 root operator 4, 23 Jul 19 06:19 /dev/da3 > > crw-r----- 1 root operator 4, 24 Jul 19 06:19 /dev/da4 > > crw-rw---- 1 robert robert 4, 26 Jul 19 06:19 /dev/da4s1 > > hp# > > > > > > hp# mount_msdosfs /dev/da2s1 /mnt/olympus > > > > hp# ls -l /mnt/olympus/dcim/100olymp > > total 680 > > -rwxr-xr-x 1 root wheel 694158 Jul 12 18:27 p7120001.jpg > > hp# > > hp# umount /mnt/olympus > > > > <here I change the SM card with another 8MB SM card> > > > > hp# mount_msdosfs /dev/da2s1 /mnt/olympus > > hp# ls -l /mnt/olympus/dcim/100olymp > > total 1352 > > -rwxr-xr-x 1 root wheel 704002 Jan 1 2000 p1010001.jpg > > -rwxr-xr-x 1 root wheel 679720 Jan 1 2000 p1010002.jpg > > hp# > > hp# umount /mnt/olympus > > > > <then I change it back to the original> > > > > hp# mount_msdosfs /dev/da2s1 /mnt/olympus > > hp# ls -l /mnt/olympus/dcim/100olymp > > total 680 > > -rwxr-xr-x 1 root wheel 694158 Jul 12 18:27 p7120001.jpg > > > > hp# umount /mnt/olympus > > > > <now I insert a 128MB SM card> > > > > hp# mount_msdosfs /dev/da2s1 /mnt/olympus > > mount_msdosfs: /dev/da2s1: Invalid argument > > hp# > > > > > Have you tried a "camcontrol rescan all" before inserting the new > disk? > - -- I had tried camcontrol rescan 0:0:2 without success and I just tried camcontrol rescan all without success. Any other suggestions?? Thanks for the response. Robert
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?161799d1617089.1617089161799d>