Date: Mon, 23 Feb 2004 22:20:46 +0200 From: Kyryll A Mirnenko <mirya@ukrpost.net> To: freebsd-questions@freebsd.org, JJB <Barbish3@adelphia.net> Subject: RE: ISP dialing with callback - def. route problems Message-ID: <162-2072798.20040223222046@ukrpost.net>
next in thread | raw e-mail | index | archive | help
Thanks to JJB, callback is set up, e.g. ISP calls back & modems
answers the call. The most stupid bug was in /etc/ttys:
ttyl0 "/usr/libexec/getty callback1" dialup on
(instead of ttyd0 - for Lucent winmodem driver).
Now I've got more sophisticated callback problem. Saying again, when
calling directly no such problem exists, as for callback - Windows
client ppp seems not to produce any problems, so that's not ISP bugs:
[!!!] PPP fails to add default route, e.g. I can see his DNS
(gethostbyname(),...) & the whole local network (for ex., his HTTP
server), but can't reach further.
# route get
says can't open roure socket, and here's the part of ppp.log (bugs're
marked with "[HERE!!!] -->"):
tun0: Command: incoming: set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255
tun0: Command: incoming: add default HISADDR
tun0: Command: incoming: set authname MYLOGIN
tun0: Command: incoming: set authkey ********
tun0: Command: incoming: set logout ATS0=0 OK AT&W OK
tun0: Phase: PPP Started (direct mode).
tun0: Phase: bundle: Establish
tun0: Phase: deflink: closed -> opening
tun0: Phase: deflink: Connected!
tun0: Phase: deflink: opening -> carrier
tun0: Phase: deflink: /dev/ttyl0: CD detected
tun0: Phase: deflink: carrier -> lcp
tun0: Phase: bundle: Authenticate
tun0: Phase: deflink: his = PAP, mine = none
tun0: Phase: Pap Output: MYLOGIN ********
tun0: Phase: Pap Input: SUCCESS ()
tun0: Phase: deflink: lcp -> open
tun0: Phase: bundle: Network
[HERE!!!] --> tun0: Phase: deflink: IPV6CP protocol reject closes IPV6CP !
[HERE!!!] --> tun0: Warning: ff02:4::/32: Change route failed: errno: Network is unreachable
Can anybody deal with this? Here's incoming ppp.conf setup:
default:
set log phase tun chat cbcp command pap
ident user-ppp VERSION (built COMPILATIONDATE)
set device /dev/cual0
set speed 38400
set dial "ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\"\" AT OK-AT-OK ATS0=1 OK AT&W OK ATE1Q0 OK \\dATDP\\T TIMEOUT 80 CONNECT"
set timeout 180 # 3 minute idle timer (the default)
enable dns # request DNS info (for resolv.conf)
enable vjcomp deflate deflate24 protocomp pred1
accept vjcomp deflate deflate24 protocomp pred1
set urgent udp +53
incoming:
set ifaddr 10.0.0.1/0 10.0.0.2/0 255.255.255.255
add default HISADDR
set authname MYLOGIN
set authkey MYPASSWORD
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?162-2072798.20040223222046>