Date: Thu, 28 Mar 1996 16:02:33 -0500 From: Richard J Kuhns <rjk@sparcmill.grauel.com> To: freebsd-scsi@freebsd.org Subject: Archive Anaconda Tape drive 1.35GB && Adaptec 1542CF Message-ID: <199603282102.QAA14902@sparcmill.grauel.com>
next in thread | raw e-mail | index | archive | help
Well, based on Jonathan Bresler's report on the Anaconda at the beginning
of this month, I decided to try one.
The machine is running -stable with the most recent ctm updates (0061, I
think), and just finished a "make world" I'd started yesterday.
I had no trouble dumping root (about 15MB), altho the tape never seemed to
stream, using "dump 0unBbf 1200000 10 /dev/nrst0 /".
When I followed up by trying to dump /usr (about 300MB), the tape ran a
little longer (it still didn't stream) and then started reporting i/o
errors reading the hard drive. I've included the kernel messages in the
dmesg output below. I interrupted the dump at this point; after it
stopped, there were no more kernel messages and everything seemed fine.
Any brilliant suggestions? Fair warning, tho: if I get this tape drive
working under the 1542, I'm liable to try it with a Buslogic 946 C next
:-).
TIA.
===
FreeBSD 2.1-STABLE #0: Thu Mar 28 13:40:16 EST 1996
root@cohome.grauel.com:/usr/src/sys/compile/COHOME
CPU: i486 DX2 (486-class CPU)
Origin = "GenuineIntel" Id = 0x436 Stepping=6
Features=0xb<FPU,VME,PSE>
real memory = 16777216 (16384K bytes)
avail memory = 14876672 (14528K bytes)
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 at 0x280-0x29f irq 5 maddr 0xd8000 msize 16384 on isa
ed0: address 00:00:c0:c5:92:d6, type SMC8216/SMC8216C (16 bit)
pca0 on motherboard
pca0: PC speaker audio driver
cy0 irq 10 maddr 0xd4000 msize 8192 on isa
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
aha0: Rev 45 (AHA-1542CF BIOS v2.01) VE.0, enabling mailbox, enabling residuals
aha0: reading board settings, dma=5 int=11 id=7 (bus speed defaulted)
aha0 at 0x330-0x333 irq 11 drq 5 on isa
aha0 waiting for scsi devices to settle
(aha0:0:0): "FUJITSU M2684S-512 2039" type 0 fixed SCSI 2
sd0(aha0:0:0): Direct-Access 507MB (1039329 512 byte sectors)
sd0(aha0:0:0): with 2380 cyls, 6 heads, and an average 72 sectors/track
(aha0:6:0): "ARCHIVE ANCDA 2750 28077 -003" type 1 removable SCSI 2
st0(aha0:6:0): Sequential-Access density code 0x12, 512-byte blocks, write-enabled
npx0 on motherboard
npx0: INT 16 interface
BIOS Geometries:
0:01fa3f20 0..506=507 cylinders, 0..63=64 heads, 1..32=32 sectors
0 accounted for
sd0s1: type 0xa5, start 32, end = 1038335, size 1038304 : OK
sd0(aha0:0:0): timed out
sd0(aha0:0:0): timed out
adapter not taking commands.. frozen?!
Debugger("aha1542") called.
AGAIN
aha0: MBO 02 and not 00 (free)
sd0(aha0:0:0): timed out
adapter not taking commands.. frozen?!
Debugger("aha1542") called.
aha0: MBO 02 and not 00 (free)
--
Rich Kuhns rjk@grauel.com
PO Box 6249
100 Sawmill Road
Lafayette, IN 47903
(317)477-6000 x319
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199603282102.QAA14902>