Date: Wed, 5 Jun 96 12:25:04 MDT From: "Phillip G. Neiswanger" <pgn@btsslc.com> To: questions@freebsd.org Subject: Need help with gateway Message-ID: <199606051819.LAA21850@freefall.freebsd.org>
next in thread | raw e-mail | index | archive | help
Hi,
I have a gateway 2000 solo portable and I'm having a little trouble
getting FreeBSD to see the 3Com EtherLink III PCMIA card. This system
is to be used with both Windows NT and FreeBSD. So when the system
arived it already had Windows NT installed and NT had configured the
card for port 110 and interupt 11. I have since tried to reconfigure
the card for a number of different port addresses and interupt lines,
but nothing seems to work.
Here is a list of its current configuration as obtained from Windows NT.
Note that the 3Com card has gone thru various addresses. NT tells me
I only have interrupts 10 and 11 available.
Item Port Intr
---------------------------------- ----------- ----
3Com EtherLink III PCMCIA 0210 - 021f 10
Chips and Technologies Accelerator 03b0 - 03bb
03bf - 03df
Floppy 03f2 - 03f2 6
03f4 - 03f5
03f7 - 03f7
Hard Disk 01f0 - 01f7 14
03f6 - 03f6
Key Board 0060 - 0060 1
0064 - 0064
Gateway 2000 Telepath 28.8 03e8 - 03ef 15
Xjack PCMCIA
Standard PS/2 Mouse 12
(really a touch pad)
Cirrus Logic PCIC compatible 03e0 - 0e31
PCMCIA controller
COM1 03f8 - 03ff 4
COM2 02f8 - 02ff 3
LPT1 0378 - 037b 7
ESS ES1688 AudioDrive 0220 - 022f 5 and 9
0388 - 038b
0330 - 0331
JoyStick 0201 - 0201
NDP 00f0 - 00ff 13
PIC 0020 - 0021 2
00a0 - 00a1
DMA 0000 - 001f
0080 - 009f
00c0 - 00df
System Clock 0070 - 0073 8
System Speaker 0061 - 0061
System timer 0040 - 0043 0
Any ideas would be greatly appreciated.
--
phil
email: pgn@phbtsus.com
phone: (801) 977-1533
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199606051819.LAA21850>