Date: Sat, 3 May 1997 09:29:32 +0200 From: j@uriah.heep.sax.de (J Wunsch) To: hackers@FreeBSD.ORG Subject: Re: WD and SD drives with NCR 53C400 card Message-ID: <19970503092932.MV50905@uriah.heep.sax.de> In-Reply-To: <19970502203633.45646@hydrogen.nike.efn.org>; from John-Mark Gurney on May 2, 1997 20:36:33 -0700 References: <Pine.BSF.3.96.970502203441.11527H-100000@Kryten.nina.org> <19970502203633.45646@hydrogen.nike.efn.org>
next in thread | previous in thread | raw e-mail | index | archive | help
As John-Mark Gurney wrote: > it should work fine... just use the nca device driver... the T130B is an > 8bit board based on the NCR53C400 or Zilog chips right? > > I had a similar board that I used for scsi before I got a real scsi card... I never had any luck using the cheap NCR 53C400-based boards that accompany HP ScanJets. This might be a question of finding the correct IO port number for them, since these boards are undocumented. Does anybody have a list of IO addresses for them? At least, the usual port numbers mentioned in GENERIC didn't work. (The boards are no doubt 53C400, so the nca driver should work.) -- cheers, J"org joerg_wunsch@uriah.heep.sax.de -- http://www.sax.de/~joerg/ -- NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-)
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19970503092932.MV50905>