Date: Tue, 20 May 1997 22:03:59 -0400 From: "Adam W. Hawks" <awhawks@perigee.net> To: current@freebsd.org Subject: worm0 failure with HP4020i and current Message-ID: <199705210204.WAA04831@pent.perigee.net>
next in thread | raw e-mail | index | archive | help
I used to be able to burn cd's with great success around 4/15/97 or so but
recently they fail with weird errors.
I am running current from 05/20/97 and recently tried to burn a cd(using the
script from /usr/share/examples/worm). It failed with the following errors.
bash# cd /usr/save
bash# burncd ports.img
Place CD in the worm drive now and press return:
dd: /dev/rworm0: Invalid argument
40+0 records in
0+0 records out
0 bytes transferred in 0.179860 secs (0 bytes/sec)
team: guy pid 4813: error on upstream receive
team: guy pid 4814: guy was aborted
team: stop remaining 4 guys
May 20 21:57:49 pent /kernel: worm0: ILLEGAL REQUEST asc:82,0 Vendor Specific ASC
May 20 21:57:49 pent /kernel: worm0: ILLEGAL REQUEST asc:82,0 Vendor Specific ASC
May 20 21:57:49 pent /kernel: worm0: ILLEGAL REQUEST asc:2c,0 Command sequence error
team: guy pid 4815: guy was aborted
May 20 21:57:49 pent /kernel: worm0: ILLEGAL REQUEST asc:2c,0 Command sequence error
wormcontrol: ioctl(WORMIOFIXATION): Invalid argument
May 20 21:57:50 pent /kernel: worm0: ILLEGAL REQUEST asc:82,0 Vendor Specific ASC
May 20 21:57:50 pent /kernel: worm0: ILLEGAL REQUEST asc:82,0 Vendor Specific ASC
bash# 5120k read
Here is a boot -v from my system
Copyright (c) 1992-1997 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-CURRENT #0: Tue May 20 20:40:27 EDT 1997
root@ns1p44.cht.perigee.net:/usr/src/sys/compile/pent
Calibrating clock(s) ... i586 clock: 74533480 Hz, i8254 clock: 1193099 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_I586_CALIBRATION not specified - using old calibration method
CPU: Pentium (74.54-MHz 586-class CPU)
Origin = "GenuineIntel" Id = 0x525 Stepping=5
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
Physical memory hole(s):
avail memory = 29933568 (29232K bytes)
DEVFS: ready for devices
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x8000005c
pcibus_setup(1a): mode1res=0x80000000 (0x80000000)
pcibus_check: device 0 [class=60000] [hdr=0] is there (id=12508086)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
chip0 <Intel 82439> rev 1 on pci0:0:0
chip1 <Intel 82371SB PCI-ISA bridge> rev 0 on pci0:7:0
chip2 <Intel 82371SB IDE interface> rev 0 on pci0:7:1
mapreg[20] type=1 addr=0000e800 size=0010.
I/O Recovery Timing: 8-bit 3.5 clocks, 16-bit 3.5 clocks
Extended BIOS: disabled
Lower BIOS: disabled
Coprocessor IRQ13: disabled
Mouse IRQ12: disabled
Interrupt Routing: A: , B: , C: , D:
MB0: , MB1:
pci0:7:2: Intel Corporation, device=0x7020, class=serial, subclass=0x03 int d irq 15 [no driver assigned]
map(20): io(e400)
fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 1 int a irq 9 on pci0:10:0
mapreg[10] type=0 addr=fb800000 size=1000.
mapreg[14] type=1 addr=0000e000 size=0020.
mapreg[18] type=0 addr=fa800000 size=100000.
reg16: virtual=0xf43fd000 physical=0xfb800000 size=0x1000
fxp0: Ethernet address 00:a0:c9:04:e8:35
bpf: fxp0 attached
ahc0 <Adaptec 2940 SCSI host adapter> rev 0 int a irq 10 on pci0:11:0
mapreg[10] type=1 addr=0000d800 size=0100.
mapreg[14] type=0 addr=fa000000 size=1000.
reg16: ioaddr=0xd800 size=0x100
ahc0: Reading SEEPROM...done.
low byte termination enabled, high byte termination enabled
ahc0: aic7870 Single Channel, SCSI Id=7, 16 SCBs
ahc0: Resetting Channel A
ahc0: Downloading Sequencer Program...ahc0: 369 instructions downloaded
Done
ahc0: Probing channel A
scbus0 at ahc0 bus 0
ahc0: target 0 synchronous at 10.0MHz, offset = 0xf
scbus0 target 0 lun 0: <FUJITSU M2694ES-512 8134> type 0 fixed SCSI 2
sd0 at scbus0 target 0 lun 0
sd0: Direct-Access 1033MB (2117025 512 byte sectors)
sd0: with 1819 cyls, 15 heads, and an average 77 sectors/track
ahc0: target 1 synchronous at 10.0MHz, offset = 0xf
scbus0 target 1 lun 0: <FUJITSU M2909S-512 0134> type 0 fixed SCSI 2
sd1 at scbus0 target 1 lun 0
sd1: Direct-Access 2956MB (6054834 512 byte sectors)
sd1: with 3138 cyls, 19 heads, and an average 101 sectors/track
ahc0:A:3: refuses synchronous negotiation. Using asynchronous transfers
scbus0 target 3 lun 0: <EXABYTE EXB-8200 2618> type 1 removable SCSI 1
st0 at scbus0 target 3 lun 0
st0: Sequential-Access density code 0x0,
st0: Target Busy
st0: Target Busy
st0: Target Busy
drive empty
ahc0:A:4: refuses synchronous negotiation. Using asynchronous transfers
scbus0 target 4 lun 0: <HP C4324/C4325 1.25> type 5 removable SCSI 2
worm0 at scbus0 target 4 lun 0
worm0: Write-Once
ahc0: target 6 synchronous at 8.0MHz, offset = 0xf
scbus0 target 6 lun 0: <NEC CD-ROM DRIVE:502 2.3> type 5 removable SCSI 2
cd0 at scbus0 target 6 lun 0
cd0: CD-ROM cd present [249912 x 2048 byte records]
vga0 <VGA-compatible display device> rev 0 int a irq 11 on pci0:12:0
mapreg[10] type=0 addr=f8000000 size=2000000.
pci0: uses 34611200d bytes of memory from f8000000 upto fb800fff.
pci0: uses 304d bytes of I/O space from d800 upto e80f.
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0e 0f 00 00 ff ff 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA color <16 virtual consoles, flags=0x0>
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
bpf: lp0 attached
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A esp_port has com 3
esp_port has com 3
esp_port has com 3
sio1 at 0x2f8-0x2ff irq 3 flags 0x10 on isa
sio1: type 16550A esp_port has com 3
esp_port has com 3
esp_port has com 3
pca0 on motherboard
pca0: PC speaker audio driver
wdc0 not found at 0x1f0
wdc1 not found at 0x170
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
npx0 msize 206696 on motherboard
npx0: INT 16 interface
gus0 at 0x220 irq 12 drq 1 flags 0x3 on isa
gus0: <Gravis UltraSound MAX (512k)>
gus0: <GUS MAX (CS4231)>
joy0 at 0x201 on isa
joy0: joystick
imasks: bio c0000440, tty f000009a, net e0000200
sio0: 64 events for device with no tp
sio1: 64 events for device with no tp
BIOS Geometries:
0:0082fe3f 0..130=131 cylinders, 0..254=255 heads, 1..63=63 sectors
1:0177fe3f 0..375=376 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
Considering FFS root f/s.
configure() finished.
DEVFS: ready to run
new masks: bio c0000440, tty f000009a, net f000029a
bpf: tun0 attached
bpf: ppp0 attached
bpf: ppp1 attached
bpf: lo0 attached
bpf: ds0 attached
ccd0-3: Concatenated disk drivers
sd0s1: type 0xa5, start 63, end = 2104514, size 2104452 : OK
Start pid=2 <pagedaemon>
Start pid=3 <vmdaemon>
Start pid=4 <update>
sd1s1: type 0xa5, start 0, end = 6054833, size 6054834 : OK
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
ipx_ctlinput: cmd 2.
Any help would be greatly appreciated.
awhawks@perigee.net
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199705210204.WAA04831>