Date: Thu, 28 Aug 1997 17:28:18 +0200 (MET DST) From: Emmanuel Duros <Emmanuel.Duros@sophia.inria.fr> To: freebsd-questions@freebsd.org Subject: mrouted configuration: overlapping subnets Message-ID: <199708281528.RAA01644@chouette.inria.fr>
next in thread | raw e-mail | index | archive | help
I am trying to run mrouted on a freeBSD router (2.2.1-RELEASE) for experimentation purposes. The router has several subnets and is configured as follow: 138.96.184.16/28 ---------- 138.96.184.32/28 -----------------| router |-------------------- de1 ---------- de2 |de0 |138.96.0.0/16 de0 = 138.96.200.2 de1 = 138.96.184.17 de2 = 138.96.184.33 the /etc/mrouted.conf is as follow: ------ #/etc/mrouted.conf # do not use interface de0 # only want to forward multicast between de1 and de2 phyint de0 disable ----- and when I start mrouted I get the following messages: $ mrouted -d 3 debug level 3 14:59:58.491 mrouted version 3.8a 14:59:58.503 Getting vifs from kernel interfaces 14:59:58.504 installing de0 (138.96.200.2 on subnet 138.96/16) as vif #0 - rate=0 14:59:58.504 warning - ignoring de1, same subnet as de0 14:59:58.505 warning - ignoring de2, same subnet as de0 14:59:58.505 Getting vifs from /etc/mrouted.conf 14:59:58.506 can't forward: no enabled vifs whereas I specify in the mrouted.conf file that I do not take into account the de0 interface. Is there a way to configure mrouted to ignore the interface de0 without having to change de1 and de2 network numbers? thankx, Emmanuel http://www.inria.fr/rodeo/personnel/eduros/ +--------------------------------------------------------------------+ |Emmanuel Duros | Emmanuel.Duros@sophia.inria.fr| |INRIA Sophia Antipolis | Projet RODEO | |2004, Route des Lucioles BP 93 | Phone : +33 (0)4 93 65 79 42 | |06902 Sophia Antipolis CEDEX France | Fax : +33 (0)4 93 65 77 65 | +--------------------------------------------------------------------+
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199708281528.RAA01644>