Date: Sat, 1 Nov 1997 19:08:54 -0700 (MST) From: Nate Williams <nate@mt.sri.com> To: Guido van Rooij <guido@gvr.org> Cc: freebsd-mobile@freebsd.org Subject: Re: problems after PAO -> 2.2.5 stable Message-ID: <199711020208.TAA00926@rocky.mt.sri.com> In-Reply-To: <199711012319.AAA00780@gvr.gvr.org> References: <199711012319.AAA00780@gvr.gvr.org>
next in thread | previous in thread | raw e-mail | index | archive | help
[ I'm not sure why, but you have *REALLY* long lines you're using, which are made mostly of just white-space tagged on the end what is giving my mailer fits. ] > I've ben hapily using a Nokia modem card for GSM phones on the PAO > release. I just upgraded to 2.2.5-stable and cannot get it to > work. pccardd says it is unable to allocate a driver for it. > What also happens is that when I insert this card into slot 1, > the 3Com etherlinkIII card in slot 0 no longer works. This is strange. What does the entry for /etc/pccard.conf look like for the ethernet card? > >From my kernel config file: > > device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr > device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr > > >From pccard.conf: > # Nokia GSM > card "Nokia Mobile Phones" "DTP-2 ver II" > config 0x20 "sio1" 3 0x2f8 What the heck is this 0x2f8 stuff at the end of your config line? Is it a PAO extension? Anyway, if you read the email I sent to the list, you need to pick the entry that corresponds to "sio1/0x2f8", which is not index 0x20, but index 0x22 > Tuple #14, code = 0x1b (Configuration entry), length = 8 > 000: 22 18 a3 60 f8 02 07 03 > Config index = 0x22 > Card decodes 3 address lines, 8 Bit I/O only > I/O address # 1: block start = 0x2f8 block length = 0x8 > IRQ modes: > IRQ level = 3 Unfortunately, it looks like it only supports IRQ 3 as well. So: card "Nokia Mobile Phones" "DTP-2 ver II" config 0x22 "sio1" 3 Should work. Nate
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199711020208.TAA00926>