Date: Tue, 14 Apr 1998 18:46:47 -0700 From: Mike Smith <mike@smith.net.au> To: current@FreeBSD.ORG Subject: HEADS UP: CAM cutover in two weeks. Message-ID: <199804150146.SAA01812@dingo.cdrom.com>
next in thread | raw e-mail | index | archive | help
One of the major feature goals for 3.0 is the transition to the new CAM-inspired SCSI subsystem. This transition requires a hard cutover date. The proposed cutover date is the 28th of April. On or about this point in time, the following steps will be taken: - A CVS tag will be applied to mark the last checkout date prior to the cutover. - The CAM code will be committed to the -current branch. - GENERIC and LINT will be translated to suit. - MAKEDEV will be updated. - Non-CAM SCSI code and drivers will be *disabled*. There will be an announcement at least 24 hours preceeding the cutover. It is important to note that the cutover to CAM will result in a number of SCSI adapters and devices becoming *unsupported*. A number of these are significant items, and developers are encouraged to take the time to update drivers which they may have an interest in. FreeBSD Test Labs will endeavour to provide loan equipment to developers undertaking such updates. The following SCSI adapters will become unsupported: Driver Adapter Owner ------ ------- ----- aha Adaptec 1542 ? (*)(+) aic Adaptec aic6x60 ? (*)(+) amd NCR 53c974 ? (*) dpt DPT RAID controllers Simon Shapiro (*) nca NCR 53c400 ? sea Seagate ST01/ST02 ? uha Ultrastor 34F ? (*)(+) vpo Iomega ppa3 (eg. Zip) Nicolas Souchu (*)(+) wds Western Digital WD7000 ? The following SCSI peripherals will become unsupported: Driver Adapter ------ ------- od Optical-disk device (*)(+) uk Unknown SCSI device worm Write-once SCSI device Drivers marked (*) are considered to be currently supported, and desirable for 3.0. FreeBSD Test Labs has development hardware available for loan to developers for drivers marked (+). In some cases, documentation may also be available. If there are any significant issues (other than FUD) relating to the proposed cutover, now is the time to raise them. Followups should be directed as follows: - Technical matters relating to updating a driver for CAM: freebsd-scsi@freebsd.org - All other issues: freebsd-current@freebsd.org -- \\ Sometimes you're ahead, \\ Mike Smith \\ sometimes you're behind. \\ mike@smith.net.au \\ The race is long, and in the \\ msmith@freebsd.org \\ end it's only with yourself. \\ msmith@cdrom.com To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199804150146.SAA01812>