Date: Fri, 24 Apr 1998 21:21:25 -0500 From: David Kelly <dkelly@HiWAAY.net> To: freebsd-scsi@FreeBSD.ORG Subject: does CAM do this? Message-ID: <199804250221.VAA27227@nospam.hiwaay.net>
next in thread | raw e-mail | index | archive | help
I deal with a lot of tapes generated on SGI Irix systems, meaning "users who don't pay much attention to what they are doing." So 4mm tapes are usually blocked at 256k and 8mm's are 128k. I've never been able to detect a performance increase and if there is an advantage in getting more data on tape I've not noticed either. Then again I don't bump against the end of tape very often on purpose. The FreeBSD 2.2.6 scsi system doesn't permit blocks larger than 64k. Or have I missed an enhancement? Today I noticed a new message: st0: 262144-byte record too big At least I think its new, but it accurately describes why I couldn't read the tape. Does CAM provide for blocks larger than 64k? If not, could CAM provide for blocks larger than 64k? What are the hardware limitations? I don't think the Adaptec 7880 family is inherently limited to 64k blocks else SGI did something special in the O2 to get around it. How about the Symbios '875? Other things I'd really like to see is the ability to easily determine the tape block size of a tape. I know it can vary on tape, but the size of the first block under the head, or last block is good enough. SGI uses "mt blocksize" to read and set it. And while we're at it would an indication if the tape is compressed. I could probably add some of these things. I have Seagate's DAT manual and have been crawling thru tcopy experimenting with methods of querying the DAT drive for error and retry statistics. We tcopy lots of tapes at work. Used 7,000 8mm tapes last year. Mostly with Solaris. -- David Kelly N4HHE, dkelly@nospam.hiwaay.net ===================================================================== The human mind ordinarily operates at only ten percent of its capacity -- the rest is overhead for the operating system. To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199804250221.VAA27227>