Date: Tue, 14 Jul 1998 15:30:48 +0200 (MEST) From: Christoph Kukulies <kuku@gilberto.physik.RWTH-Aachen.DE> To: freebsd-isdn@FreeBSD.ORG Subject: isdnd.rc - cannot dial in Message-ID: <199807141330.PAA17253@gilberto.physik.RWTH-Aachen.DE>
next in thread | raw e-mail | index | archive | help
Environment: i4b-100798, FreeBSD-2.2.6
I thought I would be able to migrate my bisdnd environment without
asking a question but though I can dialout fine to every remote
site I had established under bisdn I still have configuration difficulties
with dialing in (raw ip). And though I studied the isdnd.rc(5) page
quite thoroughly I cannot withhold coming up with a question:
On vtty6 I can see <unknown> incoming call from 2405419245
but it doesn't seem to get answered or recognized at all.
Below is my isdnd.rc:
#------------------------------------------------------------------------------
#
# example of a configuration file for the isdn daemon
# ---------------------------------------------------
#
# $Id: isdnd.rc,v 1.7 1998/07/09 12:12:58 hm Exp $
#
# last edit-date: [Thu Jul 9 14:14:54 1998]
#
# NOTICE:
# =======
# This configuration file is an EXAMPLE only and MUST be edited
# carefully to get the desired results!
#
# Please read the "isdnd.rc" manual page (execute "man isdnd.rc")
# for reference !
#
#------------------------------------------------------------------------------
#==============================================================================
# SYSTEM section: isdnd global configuration parameters
#==============================================================================
system
# accounting
# ----------
acctall = on # generate info for everything
acctfile = /var/log/isdnd.acct # name & location of accounting file
useacctfile = yes # generate accouting info to file
# monitor
# -------
monitor-allowed = yes # global switch: monitor on/off
monitor-port = 451 # default monitor TCP port
# Monitor rights are granted due to the most specific host/net spec, i.e. in
# the example below host 192.168.1.2 will have the rights specified on that
# line, even so it belongs to net 192.168.1.0/24 as well.
#
# A monitor specification may either be:
#
# - the name of a local (UNIX-domain) socket; this MUST start with a "/"
#monitor = "/var/run/isdn-monitor"
#monitor-access = fullcmd
#monitor-access = channelstate, logevents
#monitor-access = callin, callout
##
## - a dotted-quad host spec
#monitor = "192.168.1.119"
#monitor-access = restrictedcmd, channelstate, callin, callout
##
## - a dotted-quad net spec with "/len" (CIDR-style) netmask spec
#monitor = "192.168.1.0/24"
#monitor-access = restrictedcmd, channelstate, callin, callout
##
## - a resolveable host name
#monitor = "rumolt"
#monitor-access = restrictedcmd, channelstate, callin, callout
##
## - a resolveable net name with "/len" netmask (s.a.) appended
#monitor = "up-vision-net/24"
#monitor-access = restrictedcmd, channelstate, callin, callout
#
# ratesfile
# ---------
ratesfile = /etc/isdn/isdnd.rates # name & location of rates file
# regular expression pattern matching
# -----------------------------------
#regexpr = "connected.*KTS" # look for matches in log messages
#regprog = connectKTS # execute program when match is found
# realtime priority section
# -------------------------
rtprio = 25 # modify isdnd's process priority
#==============================================================================
# entry section: IP over ISDN
#==============================================================================
entry
name = rwth # name for reference. This name will
# be used in the logfile to identfy
# this entry.
# the network or telephone device
# the data traffic should be routed to:
usrdevicename = ipr # ipr, isppp, tel, rbch
usrdeviceunit = 0 # unit number
# the ISDN controller number to be
# used for this entry:
isdncontroller = 0 # contoller to use or -1 to use any
isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any
# incoming only, outgoing only or both:
direction = inout # in, out, inout
# numbers used to verify a DIAL IN:
local-phone-incoming = 4190006 # my number
# numbers used at DIAL OUT time:
local-phone-dialout = 4190006 # this is my number
remote-phone-dialout = 44129870 # i call this remote number
# in case i have several remote
# telephone numbers specified, this
# is used to specify which one is
# used next on dial fail or retry:
remdial-handling = first # first, last or next
# what happenes if someone dials in:
dialin-reaction = accept # reject, ignore, answer, callback
# normal dialout or do i call back:
dialout-type = normal # normal / calledback
callbackwait = 1 # no of secs to wait before calling back
# type of protocol on the B-channel:
# hdlc must be specified for IP (the
# ipr and isppp drivers), raw must be
# specified for telephone answering
b1protocol = hdlc # hdlc, raw
# shorthold mode and idle time
# configuration:
ratetype = 0 # ratesfile entry to use
unitlength = 90 # unitlength to assume
unitlengthsrc = rate # none, rate, cmdl, conf, aocd
idletime-incoming = 120 # incoming call idle timeout
idletime-outgoing = 60 # outgoing call idle timeout
earlyhangup = 5 # time to hangup before an expected
# next charging unit will occur
# retry and recovery parameters
dialretries = 3 # # of dial retries
dialrandincr = off # random dial increment time
recoverytime = 5 # time to wait between 2 dial tries
usedown = off # set i/f down
downtries = 5 # retry cycles before set down
downtime = 30 # time to be in down before going up
##==========================================================================
entry
name = kuku-home # name for reference. This name will
# be used in the logfile to identfy
# this entry.
# the network or telephone device
# the data traffic should be routed to:
usrdevicename = ipr # ipr, isppp, tel, rbch
usrdeviceunit = 1 # unit number
# the ISDN controller number to be
# used for this entry:
isdncontroller = 0 # contoller to use or -1 to use any
isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any
# incoming only, outgoing only or both:
direction = inout # in, out, inout
# numbers used to verify a DIAL IN:
local-phone-incoming = 4190006 # my number
# numbers used at DIAL OUT time:
local-phone-dialout = 4190006 # this is my number
remote-phone-dialout = 02405419245 # i call this remote number
remote-phone-incoming = 2405419245 # anyone can call in
# in case i have several remote
# telephone numbers specified, this
# is used to specify which one is
# used next on dial fail or retry:
remdial-handling = first # first, last or next
# what happenes if someone dials in:
dialin-reaction = accept # reject, ignore, answer, callback
# normal dialout or do i call back:
dialout-type = normal # normal / calledback
callbackwait = 1 # no of secs to wait before calling back
# type of protocol on the B-channel:
# hdlc must be specified for IP (the
# ipr and isppp drivers), raw must be
# specified for telephone answering
b1protocol = hdlc # hdlc, raw
# shorthold mode and idle time
# configuration:
ratetype = 0 # ratesfile entry to use
unitlength = 90 # unitlength to assume
unitlengthsrc = rate # none, rate, cmdl, conf, aocd
idletime-incoming = 120 # incoming call idle timeout
idletime-outgoing = 60 # outgoing call idle timeout
earlyhangup = 5 # time to hangup before an expected
# next charging unit will occur
# retry and recovery parameters
dialretries = 3 # # of dial retries
dialrandincr = off # random dial increment time
recoverytime = 5 # time to wait between 2 dial tries
usedown = off # set i/f down
downtries = 5 # retry cycles before set down
downtime = 30 # time to be in down before going up
#==============================================================================
# entry section: answering machine example
#==============================================================================
entry
name = I4BTEL # name for reference
usrdevicename = tel # ipr, tel, rbch
usrdeviceunit = 0 # unit number
isdncontroller = 0 # contoller to use or -1 to use any
isdnchannel = -1 # channel (1/2) to use or 0 or -1 for any
# numbers used to verify at DIAL IN
local-phone-incoming = 4190006 # this is my number
remote-phone-incoming = * # anyone can call in
dialin-reaction = answer # accept, reject, ignore, answer
answerprog = answer # program to run
b1protocol = raw # hdlc, raw
idletime-incoming = 10 # 5 seconds idle timeout
#=======================================================================
# entry section: PPP example
#======================================================================
entry
name = I4BPPP
usrdevicename = isppp
usrdeviceunit = 0
isdncontroller = 0
isdnchannel = -1
local-phone-incoming = 1234
remote-phone-incoming = 5678
local-phone-dialout = 1234
remote-phone-dialout = 5678
remdial-handling = first
dialin-reaction = accept
dialout-type = normal
b1protocol = hdlc
idletime-incoming = 240
idletime-outgoing = 30
ratetype = 0
unitlength = 90
unitlengthsrc = rate
dialretries = 3
dialrandincr = on
recoverytime = 25
usedown = off
downtries = 2
downtime = 30
# EOF #########################################################################
The problem seems to be: I can dialout through entry kuku-home
but I cannot dial in from kuku-home to ipr1.
Here is /etc/rc.isdn:
#!/bin/sh
# -- from rc.bisdn --
if [ $1 != "restart" ] ; then
sysctl -w net.inet.ip.forwarding=1
# config isdn interface 0,1
echo 'configuring ISDN/IP-interface ipr0 ...'
ifconfig ipr0 inet 137.226.144.17 137.226.144.1 netmask 255.255.255.255
ifconfig ipr1 inet 192.168.1.119 192.168.0.1 netmask 255.255.255.255
ifconfig ipr0
ifconfig ipr1
route add -net default 137.226.144.1
route add -net 192.168.0.0 192.168.1.119
netstat -rn
#---------------------------------------------------------------------------
#
# /etc/rc.isdn - isdn4bsd EXAMPLE startup script
# ----------------------------------------------
#
# $Id: rc.isdn,v 1.3 1998/07/09 12:19:02 hm Exp $
#
# NOTICE:
# =======
# This startup script file is an EXAMPLE only and MUST be edited
# ==============================================================
# carefully to get the desired results !!!!
# =========================================
#
# last edit-date: [Thu Jul 9 13:40:15 1998]
#
# accepts argument "restart" to kill and restart the isdnd or
# argument "stop" to kill isdnd.
#
#---------------------------------------------------------------------------
fi
# rotate isdnd's logfile at startup ?
rotate_log=NO
#rotate_log=YES
# start isdntrace in background
run_isdntrace=NO
#run_isdntrace=YES
# flags for isdntrace
#isdntraceflags=""
isdntraceflags="-i"
# trace logfile for isdntrace
isdntracefile=/var/tmp/isdn.trace
# enable verbose debugging messages in isdnd
do_isdnddebug=NO
#do_isdnddebug=YES
# debugging level
debuglevel="-d0"
#debuglevel="-d0xf9 -dn"
# output device for fullscreen mode, this device must have no getty running !
out_dev=/dev/ttyv6
# terminal type for fullscreen mode (this is for the pcvt VT220 emulator)
out_typ=cons25
# restart daemon ?
restart=0
# check for restart or stop arguments
if [ $# -eq 1 ]
then
if [ $1 = restart ]
then
restart=1
kill `cat /var/run/isdnd.pid`
elif [ $1 = stop ]
then
echo 'terminating the isdn4bsd ISDN management daemon ...'
kill `cat /var/run/isdnd.pid`
exit 0
fi
fi
# rotate log file
if [ X${rotate_log} = X"YES" ]
then
if [ -f /var/log/isdnd.log ]
then
echo "rotating /var/log/isdnd.log file ..."
cd /var/log
if [ -f isdnd.log4 ] ; then mv -f isdnd.log4 isdnd.log5 ; fi
if [ -f isdnd.log3 ] ; then mv -f isdnd.log3 isdnd.log4 ; fi
if [ -f isdnd.log2 ] ; then mv -f isdnd.log2 isdnd.log3 ; fi
if [ -f isdnd.log1 ] ; then mv -f isdnd.log1 isdnd.log2 ; fi
if [ -f isdnd.log0 ] ; then mv -f isdnd.log0 isdnd.log1 ; fi
cp -pf isdnd.log isdnd.log0
cat /dev/null > isdnd.log
fi
fi
# start the isdn daemon
if [ -x /usr/local/bin/isdnd ]
then
if [ $restart -eq 1 ]
then
echo 'restarting the isdn4bsd ISDN management daemon ...'
else
echo 'starting the isdn4bsd ISDN management daemon ...'
fi
if [ X${do_isdnddebug} = X"YES" ]
then
/usr/local/bin/isdnd ${debuglevel} -b -f -r $out_dev -t $out_typ
else
/usr/local/bin/isdnd -b -f -r $out_dev -t $out_typ
fi
fi
# start the isdntrace utility
if [ X${run_isdntrace} = X"YES" ]
then
if [ -x /usr/local/bin/isdntrace -a $restart -eq 0 ]
then
echo 'starting the isdn4bsd ISDN tracing facility ...'
nohup /usr/local/bin/isdntrace ${isdntraceflags} -f{isdntracefile} >/dev/null 2>&1 &
fi
fi
# EOF
A helping tip appreciated. Thanks.
--
Chris Christoph P. U. Kukulies kuku@gil.physik.rwth-aachen.de
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-isdn" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199807141330.PAA17253>