Date: Tue, 28 Jul 1998 12:05:53 -0400 From: Mark Fullmer <maf@net.ohio-state.edu> To: freebsd@magnet.geophysik.tu-freiberg.de Cc: freebsd-current@FreeBSD.ORG Subject: Re: Answering myself, was: URGENT! ASUS P2B/LS supported ? Message-ID: <19980728120553.A22817@net.ohio-state.edu> In-Reply-To: <199807281108.NAA00456@magnet.geophysik.tu-freiberg.de>; from Holm Tiffe on Tue, Jul 28, 1998 at 01:08:58PM %2B0200 References: <19980728051057.A14534@net.ohio-state.edu> <199807281108.NAA00456@magnet.geophysik.tu-freiberg.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Jul 28, 1998 at 01:08:58PM +0200, Holm Tiffe wrote: > > > The Machine is running fine, the AIC 7890 is supported from our > > > CAM SCSI drivers, and the onboard Ethernet (I82558) works > > > flawlessly whit the fxp driver. (only 10 Base T testet) > > > > Do you get the following error on boot? > > > > pci_map_mem failed: bad memory type=0xfffff004 > > > > No, no problems at all, where do you get this message ? > After the initializing of the NIC or what ? This is -stable around the 2.2.7 branch, not current. The pci code has changed quite a bit in -current. chip2 <Intel 82371AB PCI-ISA bridge> rev 2 on pci0:4:0 chip3 <Intel 82371AB IDE interface> rev 1 on pci0:4:1 chip4 <Intel 82371AB USB interface> rev 1 int d irq 12 on pci0:4:2 chip5 <Intel 82371AB Power management controller> rev 2 on pci0:4:3 ahc0 <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0 int a irq 12 on pci0:6:0 pci_map_mem failed: bad memory type=0xfffff004 ahc0: aic7890/91 Wide Channel A, SCSI Id=7, 32/255 SCBs fxp0 <Intel EtherExpress Pro 10/100B Ethernet> rev 5 int a irq 10 on pci0:7:0 -- mark To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980728120553.A22817>