Date: Wed, 5 Aug 1998 14:46:39 +0200 From: Andreas Klemm <aklemm@hightek.com> To: Andreas Klemm <aklemm@hightek.com>, hardware@FreeBSD.ORG Subject: Re: is 3COM 3C905B-TX supported under 2.2.6-STABLE or 2.2.7-STABLE ? Message-ID: <19980805144639.25256@hightek.com> In-Reply-To: <19980805132803.06625@hightek.com>; from Andreas Klemm on Wed, Aug 05, 1998 at 01:28:03PM %2B0200 References: <19980805131342.03721@hightek.com> <19980805132803.06625@hightek.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Tried to fix it in /usr/src/sys/pci/if_vx_pci.c by hacking in support for this card: --- if_vx_pci.c.orig Wed Aug 5 14:44:38 1998 +++ if_vx_pci.c Wed Aug 5 14:45:00 1998 @@ -84,6 +84,8 @@ return "3COM 3C900 Etherlink XL PCI"; if(device_id == 0x905010b7ul || device_id == 0x905110b7ul) return "3COM 3C905 Fast Etherlink XL PCI"; + if(device_id == 0x905510b7ul) + return "3COM 3C905B Fast Etherlink TX PCI"; return NULL; } Though the vx driver now has been assigned to this card, the machine now hangs at boottime. If I go into single user mode and type in the ifconfig command manualle, then the kernel spits out out of mbuf clusters - increase maxusers Well, actually this was a custom kernel with maxusers already set to 256. On Wed, Aug 05, 1998 at 01:28:03PM +0200, Andreas Klemm wrote: > Additional info: the 2.2.6 system tells the following during boot: > > pci0:15: vendor=0x10b7, device=0x9055, class=network (ethernet) int a irq 12 > [no driver assigned] > > On Wed, Aug 05, 1998 at 01:13:42PM +0200, Andreas Klemm wrote: > > When installing a 2.2.6 machine from CD-ROM the > > 3COM 3C905B-TX 10/100 PCI card isn't detected. > > > > The chipset is: > > Parallel Tasking II > > Performance > > 3Com 40-0502-001 > > 9805S 10727438 > > LUCENT 40-05021 > > > > The card: > > FAB 02-0152-000 Rev 03 > > > > Please help, currently installing ;-) > > > > -- > > B&K Gruppe - Wuppertal <aklemm@hightek.com> > > phone +49 202 7399 - 170 <andreas@FreeBSD.ORG> > > fax +49 202 7399 - 100 http://www.FreeBSD.ORG/~andreas/ > > > > To Unsubscribe: send mail to majordomo@FreeBSD.org > > with "unsubscribe freebsd-hardware" in the body of the message > > -- > B&K Gruppe - Wuppertal <aklemm@hightek.com> > phone +49 202 7399 - 170 <andreas@FreeBSD.ORG> > fax +49 202 7399 - 100 http://www.FreeBSD.ORG/~andreas/ -- B&K Gruppe - Wuppertal <aklemm@hightek.com> phone +49 202 7399 - 170 <andreas@FreeBSD.ORG> fax +49 202 7399 - 100 http://www.FreeBSD.ORG/~andreas/ To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-hardware" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19980805144639.25256>