Date: Mon, 7 Dec 1998 14:17:58 -0500 (EST) From: "Russell D. Murphy" <rdmurphy@vt.edu> To: FreeBSD-mobile@FreeBSD.ORG Subject: 3Com 3C589D - "driver allocation failed" Message-ID: <199812071917.OAA29827@neale.econ.vt.edu>
next in thread | raw e-mail | index | archive | help
I'm having trouble getting a 3Com ethernet card to work with pccardd
in my Gateway 5100. It works fine with the zp0 driver compiled into
the kernel. However, I recently got a modem, so I'm trying to get
pccardd to work.
After enabling DEBUG in pccardd, I get (in /var/log/pccardd.debug,
removing the date/time stamps):
----------
kenmare pccardd[946]: mem=0xd4000
kenmare pccardd[946]: Using I/O addr 0x240, size 16
kenmare pccardd[946]: Setting config reg at offs 0x10000 to 0x41, Reset time = 50 ms
kenmare pccardd[946]: Assigning I/O window 0, start 0x240, size 0x10 flags 0x7
kenmare pccardd[946]: Assign zp0, io 0x240, mem 0x0, 0 bytes, irq 10, flags 80
kenmare pccardd[946]: driver allocation failed for 3Com Corporation
kenmare pccardd[946]: State same as before, continuing anyway
kenmare pccardd[946]: pccardd started
kenmare pccardd[946]: Found existing driver (zp0) for 3Com Corporation
kenmare pccardd[946]: Using I/O addr 0x240, size 16
kenmare pccardd[946]: Setting config reg at offs 0x10000 to 0x41, Reset time = 50 ms
kenmare pccardd[946]: Assigning I/O window 0, start 0x240, size 0x10 flags 0x7
kenmare pccardd[946]: Assign zp0, io 0x240, mem 0x0, 0 bytes, irq 10, flags 80
kenmare pccardd[946]: driver allocation failed for 3Com Corporation
----------
My pccard.conf is:
----------
# Generally available IO ports
io 0x240-0x360
# Generally available IRQs (Built-in sound-card owners remove 5)
irq 3 10 11 13 15
# Available memory slots
memory 0xd4000 96k
# 3Com Etherlink III 3C589D
card "3Com Corporation" "3C589D"
config 0x1 "zp0" 10
insert echo 3Com Corporation inserted
insert /etc/pccard_ether zp0
remove echo 3Com Etherlink III removed
remove /sbin/ifconfig zp0 delete
# 3com/USR/Megahertz 3CCM556
card "3Com" "3CXM/3CCM556"
config 0x23 "sio2" ?
insert echo 3Com PCMCIA 56K Modem inserted
remove echo 3Com PCMCIA 56K Modem removed
----------
And the output of "pccardc dumpcis" is:
----------
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 2
000: 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = reserved, 32 units
Tuple #2, code = 0x17 (Attribute memory descriptor), length = 3
000: 43 02 ff
Attribute memory device information:
Device number 1, type EEPROM, WPS = OFF
Speed = 150nS, Memory block size = 8Kb, 1 units
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 89 05
PCMCIA ID = 0x101, OEM ID = 0x589
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #5, code = 0x15 (Version 1 info), length = 58
000: 04 01 33 43 6f 6d 20 43 6f 72 70 6f 72 61 74 69
010: 6f 6e 00 33 43 35 38 39 44 00 54 50 2f 42 4e 43
020: 20 4c 41 4e 20 43 61 72 64 20 56 65 72 2e 20 32
030: 61 00 30 30 30 30 30 32 00 ff
Version = 4.1, Manuf = [3Com Corporation],card vers = [3C589D]
Addit. info = [TP/BNC LAN Card Ver. 2a],[000002]
Tuple #6, code = 0x1a (Configuration map), length = 6
000: 02 03 00 00 01 03
Reg len = 3, config register addr = 0x10000, last config = 0x3
Registers: XX------
Tuple #7, code = 0x1b (Configuration entry), length = 15
000: c1 01 1d 71 55 35 55 54 e0 72 5d 64 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 3 x 10mA
Max current average over 10 ms: 5 x 10mA
Power down supply current: 5 x 1mA
Wait scale Speed = 7.0 x 100 ns
RDY/BSY scale Speed = 7.0 x 100 ns
Card decodes 18 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQs: IOCK 1 4 5 6 8 10 11 12 14
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 03 01 71 55 26 26 54
Config index = 0x3
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 2 x 100mA
Max current average over 10 ms: 2 x 100mA
Power down supply current: 5 x 1mA
Tuple #9, code = 0x19 (JEDEC descr for attribute memory), length = 3
000: 00 00 ff
Tuple #10, code = 0x14 (No link), length = 0
Tuple #11, code = 0x10 (Checksum), length = 5
000: 88 ff 81 00 00
Checksum from offset -120, length 129, value is 0x0
Tuple #12, code = 0xff (Terminator), length = 149
000: 00 03 83 00 fd ff ff ff ff ff ff ff ff ff ff ff
010: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
020: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
030: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
040: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
050: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
060: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
070: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
090: ff ff ff ff ff
2 slots found
----------
Any suggestions as to how to get this working?
Thanks-
Russ Murphy
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199812071917.OAA29827>