Date: Fri, 25 Dec 1998 03:29:54 -0600 (CST) From: stab <stab@wildstar.net> To: freebsd-questions@FreeBSD.ORG Message-ID: <199812250929.DAA21437@wildstar.net>
next in thread | raw e-mail | index | archive | help
Hi, when I try to do a 'make world', I have various problems
with my compiler. I get the following error a little while
after I being:
Dec 24 21:23:07 oblivion /kernel: pid 28575 (cc1), uid 0: exited on
signal 11 (core dumped)
( I believe it did the same thing on signal 10, but I could be wrong )
Is there settings I should change in my bios? (amibios 2.5) or things I
should add to my kernel?
This is my dmesg output:
Please reply to stab@wildstar.net
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 2.2.8-STABLE #0: Mon Dec 21 18:13:01 GMT 1998
stab@oblivion:/usr/src/sys/compile/oblivion
Calibrating clock(s) ... i8254 clock: 1193162 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CPU: Cyrix 6x86 (486-class CPU)
Origin = "CyrixInstead" DIR=0x1531 Stepping=1 Revision=5
CPU cache: write-through mode
real memory = 67108864 (65536K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00202000 - 0x03ffdfff, 64995328 bytes (15868 pages)
avail memory = 63528960 (62040K bytes)
pcibus_setup(1): mode 1 addr port (0x0cf8) is 0x00007680
pcibus_setup(1a): mode1res=0x80000000 (0x80000000)
pcibus_check: device 0 is there (id=55911039)
Probing for devices on PCI bus 0:
configuration mode 1 allows 32 devices.
chip0 <generic PCI bridge (vendor=1039 device=5591 subclass=0)> rev 2 on pci0:0:0
mapreg[10] type=0 addr=fc000000 size=2000000.
pci0:0:1: Silicon Integrated Systems, device=0x5513, class=storage (ide) int a irq ?? [no driver assigned]
map(10): io(9567d8a0)
map(14): io(7732b518)
map(18): io(6e84f7a8)
map(1c): io(25d26554)
map(20): io(4000)
chip1 <SiS 85c503> rev 1 on pci0:1:0
pci0:1:1: Silicon Integrated Systems, device=0x0009, class=0xff, subclass=0x00 [no driver assigned]
chip2 <generic PCI bridge (vendor=1039 device=0001 subclass=4)> rev 0 on pci0:2:0
bridge from pci0 to pci1 through 1.
mapping regs: io:2000c0c0 mem:fb50fb50 pmem:fb30fb30
vga0 <VGA-compatible display device> rev 227 int a irq ?? on pci0:11:0
mapreg[10] type=0 addr=ff800000 size=200000.
mapreg[14] type=0 addr=ffaf0000 size=10000.
pci0: uses 35717120 bytes of memory from fb300000 upto ffafffff.
pci0: subordinate busses from 1 upto 1.
Probing for devices on PCI bus 1:
Probing for devices on the ISA bus:
sc0: the current keyboard controller command byte 0065
kbdio: DIAGNOSE status:0055
kbdio: TEST_KBD_PORT status:0000
kbdio: RESET_KBD return code:00fa
kbdio: RESET_KBD status:00aa
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: BIOS video mode:3
sc0: VGA registers upon power-up
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: video mode:24
sc0: VGA registers in BIOS for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: VGA registers to be used for mode:24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
sc0: rows_offset:1
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <SAMSUNG SHD-30280A (APOLLO-5) SSI>
wd0: 267MB (547470 sectors), 869 cyls, 10 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <WDC AC31200F>
wd1: 1222MB (2503872 sectors), 2484 cyls, 16 heads, 63 S/T, 512 B/S
npx0 on motherboard
npx0: INT 16 interface
imasks: bio c0084040, tty c003001a, net c0060000
BIOS Geometries:
0:0363093f 0..867=868 cylinders, 0..9=10 heads, 1..63=63 sectors
1:03ff0f3f 0..1023=1024 cylinders, 0..15=16 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
bpf: tun0 attached
bpf: ppp0 attached
new masks: bio c0084040, tty c003001a, net c007001a
bpf: lo0 attached
Considering FFS root f/s.
wd1s1: type 0xa5, start 63, end = 2503871, size 2503809 : OK
wd0s4: type 0x6, start 63, end = 546839, size 546777 : OK
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199812250929.DAA21437>