Date: Fri, 19 Feb 1999 15:44:31 -0500 From: Vince Gonzalez <vince@nycrc.net> To: freebsd-scsi@freebsd.org Subject: NCR810 and Sony CDU 926 troubles Message-ID: <19990219154431.A1142@nycrc.net>
next in thread | raw e-mail | index | archive | help
Hi,
I'm having troubles with this combo and 3.0-RELEASE. The dmesg output should be
pretty self-explanatory; on boot the system has difficulty with the Sony CD-R
and eventually times out. This drive and controller are both known to work
under other OSes (Linux,OpenBSD,Win98). Here's my dmesg output: (Note that this
also happened under the generic kernel - I tried recompiling, to no avail).
Can anyone direct me on how to proceed?
Copyright (c) 1992-1998 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.0-RELEASE #1: Thu Feb 18 19:41:32 EST 1999
root@moe.nycrc.net:/usr/src/sys/compile/MOE
Timecounter "i8254" frequency 1193182 Hz cost 3188 ns
Timecounter "TSC" frequency 300682855 Hz cost 166 ns
CPU: Pentium II (quarter-micron) (300.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x652 Stepping=2
Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory = 67108864 (65536K bytes)
avail memory = 62877696 (61404K bytes)
Probing for devices on PCI bus 0:
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.7.0
ide_pci0: <Intel PIIX4 Bus-master IDE controller> rev 0x01 on pci0.7.1
chip3: <Intel 82371AB USB host controller> rev 0x01 int d irq 255 on pci0.7.2
chip4: <Intel 82371AB Power management controller> rev 0x02 on pci0.7.3
fxp0: <Intel EtherExpress Pro 10/100B Ethernet> rev 0x05 int a irq 12 on pci0.11.0
fxp0: Ethernet address 00:a0:c9:e8:1d:51
ncr0: <ncr 53c810 fast10 scsi> rev 0x02 int a irq 10 on pci0.13.0
Probing for devices on PCI bus 1:
vga0: <VGA-compatible display device> rev 0x21 int a irq 11 on pci1.0.0
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
psm0 not found at 0x60
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <IBM-DTTA-351010>
wd0: 9671MB (19807200 sectors), 19650 cyls, 16 heads, 63 S/T, 512 B/S
wdc0: unit 1 (wd1): <Maxtor 85120A8>
wd1: 4884MB (10003392 sectors), 9924 cyls, 16 heads, 63 S/T, 512 B/S
wdc1 at 0x170-0x177 irq 15 on isa
wdc1: unit 0 (atapi): <TOSHIBA CD-ROM XM-5702B/2826>, removable, accel, ovlap, dma, iordy
wcd0: 2067Kb/sec, 256Kb cache, audio play, 255 volume levels, ejectable tray
wcd0: no disc inside, unlocked
npx0 on motherboard
npx0: INT 16 interface
Waiting 2 seconds for SCSI devices to settle
ncr0: SCSI phase error fixup: CCB already dequeued (0xf0862a00)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862a00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0862e00 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860200 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860600 (skip)
ncr0: timeout nccb=0xf0860a00 (skip)
ncr0: timeout nccb=0xf0860a00 (skip)
ncr0: timeout nccb=0xf0860a00 (skip)
ncr0: timeout nccb=0xf0860a00 (skip)
ncr0: timeout nccb=0xf0860a00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0860e00 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
ncr0: timeout nccb=0xf0865400 (skip)
changing root device to wd1s1a
ncr0: timeout nccb=0xf0865600 (skip)
ncr0: timeout nccb=0xf0865600 (skip)
(cd0:ncr0:0:6:0): got CAM status 0x4b
(cd0:ncr0:0:6:0): fatal error, failed to attach to device(cd0:ncr0:0:6:0): removing device entry
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990219154431.A1142>