Date: Wed, 14 Apr 1999 10:39:23 -0800 From: al7oj@customcpu.com To: multimedia@FreeBSD.ORG Subject: No audio with FreeBSD3.0-R Message-ID: <19990414184530214.AAA204@anch01.customcpu.com@mail.customcpu.com>
next in thread | raw e-mail | index | archive | help
I have been trying for some time to get audio working. I provide the info below. I followed the directions in (4)pcm to the letter, but looking at ls-l /dev/audio*, it looks like the links are backwards. I did all the 'rm ... audio...' again, and the links came back the same. Anyway, no .wav or .au sound nor does xcd work. Any ideas? Thanks, Mike ------------------------------------------------------------------------ FROM ls -l /dev/audio* lrwxrwxrwx 1 root wheel 6 Apr 10 19:43 /dev/audio -> audio1 crw-rw-rw- 1 root wheel 30, 20 Apr 10 19:43 /dev/audio1 FROM CAT /DEV/SNDSTAT: FreeBSD Audio Driver (981002) Apr 10 1999 12:43:55 Installed devices: pcm1: <CS4237> at 0x530 irq 5 dma 1:3 FROM MYKERNEL: device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 vector pcmintr FROM DMESG: Copyright (c) 1992-1998 FreeBSD Inc. Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. FreeBSD 3.0-RELEASE #5: Sat Apr 10 12:47:10 AKDT 1999 root@FreeBSDrulz:/usr/src/sys/compile/MYKERNEL Timecounter "i8254" frequency 1193182 Hz cost 1450 ns Timecounter "TSC" frequency 233288309 Hz cost 94 ns CPU: AMD-K6tm w/ multimedia extensions (233.29-MHz 586-class CPU) Origin = "AuthenticAMD" Id = 0x562 Stepping=2 Features=0x8001bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8,MMX> real memory = 67108864 (65536K bytes) FreeBSD Kernel Configuration Utility - Version 1.1 Type "help" for help or "visual" to go to the visual configuration interface (requires MGA/VGA display or serial terminal capable of displaying ANSI graphics). config> ls Device port irq drq iomem iosize unit flags enab confl fdc0 0x3f0 6 2 0 0 0 0 Yes No wdc0 0x1f0 14 -1 0 0 0 0 Yes No wdc1 0x170 15 -1 0 0 1 0 Yes No pcm0 0xffffffff 5 1 0 0 0 0 Yes No pca0 0x40 -1 -1 0 0 0 0 Yes No sc0 0x60 1 -1 0 0 0 0 Yes Yes sio0 0x3f8 4 -1 0 0 0 0x10 Yes No sio1 0x2f8 3 -1 0 0 1 0 Yes No sio2 0x3e8 5 -1 0 0 2 0 No No sio3 0x2e8 9 -1 0 0 3 0 No No lpt0 0xffffffff 7 -1 0 0 0 0 Yes No psm0 0x60 12 -1 0 0 0 0 Yes Yes npx0 0xf0 13 -1 0 0 0 0 Yes No Number of EISA slots to probe: 10 config> pnp 1 0 os enable irq0 5 drq0 1 port0 0x534 port2 0x220 drq1 3 config> pnp 2 0 os enable irq0 4 port0 0x3F8 config> quit avail memory = 63180800 (61700K bytes) Probing for devices on PCI bus 0: chip0: <Host to PCI bridge (vendor=10b9 device=1531)> rev 0xb2 on pci0.0.0 chip1: <PCI to ISA bridge (vendor=10b9 device=1533)> rev 0x07 on pci0.2.0 ide_pci0: <PCI IDE controller (busmaster capable)> rev 0x20 int a irq 255 on pci0.11.0 vga0: <S3 ViRGE DX/GX graphics accelerator> rev 0x01 int a irq 9 on pci0.14.0 Probing for PnP devices: CSN 1 Vendor ID: CSC8037 [0x3780630e] Serial 0xffffffff Comp ID: @@@0000 [0x00000000] mss_attach <CS4237>1 at 0x530 irq 5 dma 1:3 flags 0x13 pcm1 (CS423x/Yamaha <CS4237> sn 0xffffffff) at 0x530-0x537 irq 5 drq 1 flags 0x13 on isa CSN 2 Vendor ID: BDP3336 [0x36339008] Serial 0x0f8c5050 Comp ID: @@@0000 [0x00000000] Probing for devices on the ISA bus: sc0 at 0x60-0x6f irq 1 on motherboard sc0: VGA color <16 virtual consoles, flags=0x0> pcm0 not probed due to drq conflict with pcm1 at 1 pca0 on motherboard pca0: PC speaker audio driver sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa sio0: type 16550A sio1 at 0x2f8-0x2ff irq 3 on isa sio1: type 16550A lpt0 at 0x378-0x37f irq 7 on isa lpt0: Interrupt-driven port lp0: TCP/IP capable interface psm0 at 0x60-0x64 irq 12 on motherboard psm0: model Generic PS/2 mouse, device ID 0 fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa fdc0: FIFO enabled, 8 bytes threshold fd0: 1.44MB 3.5in wdc0 at 0x1f0-0x1f7 irq 14 on isa wdc0: unit 0 (wd0): <Maxtor 83240D3> wd0: 3090MB (6328665 sectors), 6697 cyls, 15 heads, 63 S/T, 512 B/S wdc0: unit 1 (wd1): <SAMSUNG SW0434A (4.3GB)> wd1: 4104MB (8406720 sectors), 8896 cyls, 15 heads, 63 S/T, 512 B/S wdc1 at 0x170-0x177 irq 15 on isa wdc1: unit 1 (atapi): <CD-ROM 24X/AKOx/17B>, removable, intr, dma, iordy wcd0: 4125Kb/sec, 120Kb cache, audio play, 255 volume levels, ejectable tray wcd0: no disc inside, unlocked npx0 on motherboard npx0: INT 16 interface changing root device to wd1s3a pid 272 (kscd), uid 1001: exited on signal 11 (core dumped) pid 278 (kscd), uid 1001: exited on signal 11 (core dumped) pid 311 (kscd), uid 0: exited on signal 11 (core dumped) pid 325 (kscd), uid 0: exited on signal 11 (core dumped) ----------------------------------------------------------- Using OS/2 Warp4 & MR2ICE (20601) I use FreeBSD (3.0), Debian Linux (2.0), OS/2 Warp 3&4, and Amiga! ----------------------------------------------------------- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-multimedia" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19990414184530214.AAA204>