Date: Thu, 1 Jul 1999 13:47:59 -0500 (CDT) From: Joe Greco <jgreco@ns.sol.net> To: ken@plutotech.com (Kenneth D. Merry) Cc: scsi@freebsd.org Subject: Re: FreeBSD panics with Mylex DAC960SX Message-ID: <199907011848.NAA85021@aurora.sol.net> In-Reply-To: <199907010410.WAA39523@panzer.kdm.org> from "Kenneth D. Merry" at "Jun 30, 1999 10:10:43 pm"
next in thread | previous in thread | raw e-mail | index | archive | help
> There are several questions I have, which I hope can be answered with some
> diagnostic patches I've appended.
>=20
> 1. Why does the da1 announcement just print 'A' and not the rest of the
> line?
>=20
> 2. Why does the camcontrol read capacity output indicate that the Mylex
> array is not ready, yet an open immediately after that seems to pass
> the read capacity by just fine?
If you're talking about when I do the camcontrol after waiting a bit -
it is because the Mylex has completed its startup routine. Remember, all
of this is only happening when the Mylex has not yet finished its startup
procedure, which can happen in the events:
1) Things are OK but it just isn't done yet. This is a rare case, the
system just boots too slow with the RAM test and the 15-second boot
prompt. If I ESC the RAM test and hit return to boot right away,
from a cold power on, then I can get the crash.
2) Things are not OK; i.e. the RAID is damaged or offline. This is the
case where I actually first noticed the behaviour.
> 3. Assuming the read capacity is returned without an error, why does the
> Mylex return a bogus sector size at least? (indicated by your
> diagnostic output from the slice code above)
>=20
> Hopefully I can at least get a clue to the answers for 1 and 2 with the
> patches appended.
>=20
> So, Joe, could you:
>=20
> - apply Bruce's patch (so you won't panic), or just keep the one you've g=
ot
Kept mine.
> - apply the attached patch to scsi_da.c
Done.
> - boot with -v (boot kernel -v at the loader prompt)
> - send the output from the boot
Whoa... okay. Well, I just modified the kernel. The same things apply
that were being done; i.e. .profile does a camcontrol and then tries to do a
fsck -p. Lots of output. I'm including it all since I don't know what is
really significant.
~~
Hit [Enter] to boot immediately, or any other key for command prompt.
=0DBooting [kernel] in 14 seconds...=20
Type '?' for a list of commands, 'help' for more detailed help.
disk1s1a:> boot -s -v=08 =08=08 =08=08 =08=08 =08v -s
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08/kernel =
text=3D0x10e9fc |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=
=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08=
/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=
=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08=
-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08dat=
a=3D0x16124+0x1de98 |=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08syms=3D=
[0x4+0x1de20|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08+0x=
4+0x20077\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08\=08|=08/=08-=08]
Copyright (c) 1992-1999 FreeBSD Inc.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 3.1-RELEASE #4: Thu Jul 1 13:29:19 CDT 1999
root@spool0.newsops.execpc.com:/usr/src/sys/compile/SPOOL-DDB
Calibrating clock(s) ... TSC clock: 400900364 Hz, i8254 clock: 1193156 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium II/Xeon/Celeron (686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0x652 Stepping=3D2
Features=3D0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,MMX,<b24>>
real memory =3D 536870912 (524288K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00293000 - 0x1ffdffff, 534040576 bytes (130381 pages)
avail memory =3D 519999488 (507812K bytes)
Programming 24 pins in IOAPIC #0
SMP: CPU0 apic_initialize():
lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Found BIOS32 Service Directory header at 0xf00f9d20
Entry =3D 0xf0530 (0xf00f0530) Rev =3D 0 Len =3D 1
PCI BIOS entry at 0x730
DMI header at 0xf00f59c0
Version 2.0
Table at 0xf59da, 32 entries, 1050 bytes
Other BIOS signatures found:
ACPI: 00000000
$PnP: 000fd150
Preloaded elf kernel "kernel" at 0xf0283000.
Math emulator present
SMP: CPU0 bsp_apic_configure():
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000010 SVR: 0x000001ff
pci_open(1): mode 1 addr port (0x0cf8) is 0x8000005c
pci_open(1a): mode1res=3D0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=3D060000] [hdr=3D00] is there (id=3D71908086)
Probing for devices on PCI bus 0:
found-> vendor=3D0x8086, dev=3D0x7190, revid=3D0x03
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[0]: type 3, range 32, base e4000000, size 26
chip0: <Intel 82443BX host to PCI bridge> rev 0x03 on pci0.0.0
found-> vendor=3D0x8086, dev=3D0x7191, revid=3D0x03
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
subordinatebus=3D1 secondarybus=3D1
chip1: <Intel 82443BX host to AGP bridge> rev 0x03 on pci0.1.0
found-> vendor=3D0x8086, dev=3D0x7110, revid=3D0x02
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
subordinatebus=3D0 secondarybus=3D0
chip2: <Intel 82371AB PCI to ISA bridge> rev 0x02 on pci0.4.0
found-> vendor=3D0x8086, dev=3D0x7111, revid=3D0x01
class=3D01-01-80, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
map[0]: type 4, range 32, base 0000d800, size 4
Freeing (NOT implemented) redirected ISA irq 10.
found-> vendor=3D0x8086, dev=3D0x7112, revid=3D0x01
class=3D0c-03-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Dd, irq=3D19
map[0]: type 4, range 32, base 0000d400, size 5
found-> vendor=3D0x8086, dev=3D0x7113, revid=3D0x02
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
chip3: <Intel 82371AB Power management controller> rev 0x02 on pci0.4.3
Freeing (NOT implemented) redirected ISA irq 10.
found-> vendor=3D0x9005, dev=3D0x001f, revid=3D0x00
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D19
map[0]: type 4, range 32, base 0000d000, size 8
map[1]: type 1, range 64, base e3000000, size 12
map[2]: type 0, range 0, base 00000000, size 0
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> rev 0x00 int a irq 19 on pci=
0.6.0
ahc0: Reading SEEPROM...done.
ahc0: BIOS eeprom is present
ahc0: Secondary High byte termination Enabled
ahc0: Secondary Low byte termination Enabled
ahc0: Primary Low Byte termination Enabled
ahc0: Primary High Byte termination Enabled
ahc0: aic7890/91 Wide Channel A, SCSI Id=3D7, 16/255 SCBs
ahc0: Downloading Sequencer Program... 392 instructions downloaded
found-> vendor=3D0x1011, dev=3D0x0024, revid=3D0x03
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
subordinatebus=3D2 secondarybus=3D2
chip4: <PCI to PCI bridge (vendor=3D1011 device=3D0024)> rev 0x03 on pci0.1=
0.0
Probing for devices on PCI bus 1:
Probing for devices on PCI bus 2:
Freeing (NOT implemented) redirected ISA irq 11.
found-> vendor=3D0x1011, dev=3D0x0009, revid=3D0x22
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D18
map[0]: type 4, range 32, base 0000b800, size 7
map[1]: type 1, range 32, base e2800000, size 7
de0: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 18 on pci2.4.0
de0: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2
de0: address 00:e0:29:2b:e1:08
bpf: de0 attached
Freeing (NOT implemented) redirected ISA irq 10.
found-> vendor=3D0x1011, dev=3D0x0009, revid=3D0x22
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D0
subordinatebus=3D0 secondarybus=3D0
intpin=3Da, irq=3D19
map[0]: type 4, range 32, base 0000b400, size 7
map[1]: type 1, range 32, base e2000000, size 7
de1: <Digital 21140A Fast Ethernet> rev 0x22 int a irq 19 on pci2.5.0
using shared irq19.
de1: SMC 9332BDT 21140A [10-100Mb/s] pass 2.2
de1: address 00:e0:29:2b:e1:09
bpf: de1 attached
Probing for devices on the ISA bus:
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
sc0 on isa
sc0: fb0 kbd0
sc0: VGA color <16 virtual consoles, flags=3D0x0>
ed0 not found at 0x280
atkbdc0 at 0x60-0x6f on motherboard
atkbd0 irq 1 on isa
kbd0: atkbd0, AT 101/102 (2), config:0x10000, flags:0x3d0000
psm0: current command byte:0067
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
psm0 not found
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0 at 0x3f8-0x3ff irq 4 flags 0x10 on isa
sio0: type 16550A, console
sio1: irq maps: 0x1 0x9 0x1 0x1
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2: configured irq 5 not in bitmap of probed irqs 0
sio2: irq maps: 0x1 0x1 0x1 0x1
sio2: probe failed test(s): 0 1 2 4 6 7 9
sio2 not found at 0x3e8
sio3: configured irq 9 not in bitmap of probed irqs 0
sio3: irq maps: 0x1 0x1 0x1 0x1
sio3: probe failed test(s): 0 1 2 4 6 7 9
sio3 not found at 0x2e8
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1.44MB 3.5in
ppc: parallel port found at 0x378
ppc0: ECP SPP ECP+EPP SPP
ppc0 at 0x378 irq 7 on isa
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
nlpt0: <generic printer> on ppbus 0
nlpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
plip: irq 7
plip0: <PLIP network interface> on ppbus 0
bpf: lp0 attached
vga0 at 0x3b0-0x3df maddr 0xa0000 msize 131072 on isa
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3b0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xf00b8000 size:32k gran:32k, buf:0x0 size:0k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81=20
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96=20
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c=20
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff=20
npx0 on motherboard
npx0: INT 16 interface
apm0: disabled, not probed.
we0 at 0x2e8 on isa
we0: kernel is keeping watchdog alive
imasks: bio c8000040, tty c70c009a, net c70c009a
SMP: enabled INTs: 1, 3, 4, 6, 7, 18, 19, apic_imen: 0x00f3ff25
BIOS Geometries:
0:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors
1:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors
2:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors
3:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors
4:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors
5:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors
6:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors
7:00000000 0..0=3D1 cylinders, 0..0=3D1 heads, 1..0=3D0 sectors
0 accounted for
Device configuration finished.
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
IP packet filtering initialized, divert disabled, rule-based forwarding dis=
abled, logging limited to 100 packets/entry
bpf: tun0 attached
bpf: sl0 attached
bpf: ppp0 attached
new masks: bio c8000040, tty c70c009a, net c70c009a
bpf: lo0 attached
Waiting 2 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
SMP: AP CPU #1 Launched!
SMP: CPU1 apic_initialize():
lint0: 0x00010700 lint1: 0x00010400 TPR: 0x00000010 SVR: 0x000001ff
de1: enabling 100baseTX port
ahc0: Selection Timeout on A:2. 1 SCBs aborted
ahc0: Selection Timeout on A:3. 1 SCBs aborted
ahc0: Selection Timeout on A:4. 1 SCBs aborted
ahc0: Selection Timeout on A:5. 1 SCBs aborted
ahc0: Selection Timeout on A:6. 1 SCBs aborted
ahc0: Selection Timeout on A:8. 1 SCBs aborted
ahc0: Selection Timeout on A:9. 1 SCBs aborted
ahc0: Selection Timeout on A:10. 1 SCBs aborted
ahc0: Selection Timeout on A:11. 1 SCBs aborted
ahc0: Selection Timeout on A:12. 1 SCBs aborted
ahc0: Selection Timeout on A:13. 1 SCBs aborted
ahc0: Selection Timeout on A:14. 1 SCBs aborted
ahc0: Selection Timeout on A:15. 1 SCBs aborted
(probe1:ahc0:0:1:0): MODE SENSE(06). CDB: 1a 0 a 0 14 0=20
(probe1:ahc0:0:1:0): NOT READY
(probe1:ahc0:0:1:0): INQUIRY. CDB: 12 1 80 0 ff 0=20
(probe1:ahc0:0:1:0): ILLEGAL REQUEST asc:24,0
(probe1:ahc0:0:1:0): Invalid field in CDB
ahc0: target 0 using 16bit transfers
ahc0: target 0 synchronous at 20.0MHz, offset =3D 0xf
ahc0: target 1 using 16bit transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
ahc0: target 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
pass0 at ahc0 bus 0 target 0 lun 0
pass0: <SEAGATE ST34371W 0484> Fixed Direct Access SCSI-2 device=20
pass0: Serial Number HD0439370E0ZET
pass0: 40.0MB/s transfers (20.0MHz, offset 15, 16bit), Tagged Queueing Enab=
led
pass1 at ahc0 bus 0 target 1 lun 0
pass1: <MYLEX DAC960SX138928B5 4332> Fixed Direct Access SCSI-2 device=20
pass1: 40.0MB/s transfers (20.0MHz, offset 16, 16bit), Tagged Queueing Enab=
led
Considahc0: target 1 using asynchronous transfers
ering FFS ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
ro(da0:ahc0:0:0:0): about to print announcement
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST34371W 0484> Fixed Direct Access SCSI-2 device=20
da0: Serial Number HD0439370E0ZET
da0: 40.0MB/s transfers (20.0MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 4148MB (8496884 512 byte sectors: 255H 63S/T 528C)
(da0:ahc0:0:0:0): printed announcement
ot f/s.
ahc0: target 1 using asynchronous transfers
changingahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
root device toahc0: target 1 using asynchronous transfers
da0s1a
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
ahc0: target 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
ahc0: target 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
(da1:ahc0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da1:ahc0:0:1:0): NOT READY
(da1:ahc0:0:1:0): about to print announcement
da1 at ahc0 bus 0 target 1 lun 0
da1: <MYLEX DAC960SX138928B5 4332> Fixed Direct Access SCSI-2 device=20
da1: 40.0MB/s transfers (20.0MHz, offset 16, 16bit), Tagged Queueing Enabled
da1: A
(da1:ahc0:0:1:0): printed announcement
(da0:ahc0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
da0s1: type 0xa5, start 63, end =3D 8482319, size 8482257 : OK
Enter full pathname of shell or RETURN for /bin/sh: de0: autosense failed: =
cable problem?
erase ^H, kill ^U, intr ^C
/sbin/camcontrol cmd -n da -u 1 -v -c 25 0 0 0 0 0 0 0 0 0 -i 8 i4 i4
ahc0: target 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
camcontrol: error sending command
(pass1:ahc0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(pass1:ahc0:0:1:0(): NOT READY
endd of camcontrol=0Da
0:ahc0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
(da0:ahc0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
/dev/rda0s1a: FILESYSTEM CLEpp=00=00/dev/rda0s1=00=00=00=0Cp=0C=00=008=0C=
=00=1F|=00=07=00=00=00=03=00=00v=00=00: 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
(da0:ahc0:ahc0: target 1 using asynchronous transfers
0:0:0): reahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
ad capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
(da1:ahc0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da1:ahc0:0:1:0): NOT READY
(da1:ahc0:0:1:0): read capacity returned 0
(da1:ahc0:0:1:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da1:ahc0:0:1:0): NOT READY
(da1:ahc0:0:1:0): address =3D -523733007, length =3D 512
(da0:ahc0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
/dev/rda0s1h: (FILESYSTEM CLEANd; SKIPPING CHECKaS
/dev/rda0s1h: 0clean, 232315 fr:ee (131 frags, 2a9023 blocks, 0.1h% fragmen=
tation)c
0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
(da0:ahc0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
/dev/rda0s1e: (FILESYSTEM CLEANd; SKIPPING CHECKaS
/dev/rda0s1e: 0clean, 51019 fre:e (8139 frags, 5a360 blocks, 4.1%h fragment=
ation)=0Dc
0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: ahc0: target 1 using asynchronous tra=
nsfers
25 0 0 0 0ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
(da0:ahc0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
/dev/rda0s1f: (FILESYSTEM CLEANd; SKIPPING CHECKaS
0/dev/rda0s1f: :clean, 112455 fraee (239 frags, 1h4027 blocks, 0.2c% fragme=
ntation)0
:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
(da0:ahc0:0:0:0): read capacity returned 0
(da0:ahc0:0:0:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0=20
(da0:ahc0:0:0:0): NOT READY
(da0:ahc0:0:0:0): address =3D 8496883, length =3D 512
/dev/rda0s1g: FILESYSTEM CLEAN; SKIPPING CHECKS
/dev/rda0s1g: clean, 1308409 free (313 frags, 163512 blocks, 0.0% fragmenta=
ti|=00c0:get 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
ahc0: target 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
ahc0: target 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
ahc0: target 1 using asynchronous transfers
ahc0: target 1 synchronous at 20.0MHz, offset =3D 0x10
(da1:ahc0:0:1:0): READ(06). CDB: 8 0 0 0 1 0=20
(da1:ahc0:0:1:0): NOT READY
da1: error reading primary partition table reading fsbn 0
Can't open /dev/rda1s1e: Input/output error
/dev/rda1s1e: CAN'T CHECK FILE SYSTEM.
/dev/rda1s1e: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY.
THE FOLLOWING FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY:
/dev/rda1s1e (/news)
#=20
That's it. Let me know if you need more.
... Joe
---------------------------------------------------------------------------=
----
Joe Greco - Systems Administrator jgreco@ns.sol.net
Solaria Public Access UNIX - Milwaukee, WI 414/342-4847
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199907011848.NAA85021>