Date: Wed, 13 Oct 1999 11:40:30 -0400 (EDT) From: Michael Lucas <mwlucas@blackhelicopters.org> To: sanpei@sanpei.org (MIHIRA Yoshiro) Cc: mobile@FreeBSD.ORG Subject: Re: troubleshooting driver failure site? Message-ID: <199910131540.LAA49189@blackhelicopters.org> In-Reply-To: <199910131519.AAA06075@lavender.yy.cs.keio.ac.jp> from MIHIRA Yoshiro at "Oct 14, 1999 0:19:19 am"
next in thread | previous in thread | raw e-mail | index | archive | help
Actually, I have two reasons for asking for a web page. I am also
assembling troubleshooting/tech support documentation for FreeBSD.
> What kind of PC-Card do you use?
I have a Toshiba America 56k modem that keeps giving me this error.
> I have Ethernet PC-Card which also has "driver allocation failed..."
> If you can, please send dumpcis information.
Certainly. This is the config for just the modem; my NIC is running fine.
If my understanding is correct, I can use the address in tuple #9 by
specifying "config 0x23" in /etc/pccard.conf. I'm currently using:
/etc/pccard.conf:
io 0x240-0x360
irq 3 9 10 11 13 15
memory 0xd4000 96k
card "Xircom" "CreditCard 10/100"
config 0x1 "xe0" 10
insert ifconfig xe0 up
remove ifconfig xe0 down
card "Toshiba America" "3CXM056-BNW"
config 0x23 "sio1" 11
insert echo Toshiba America Modem inserted
---
I have sio1 configured into my kernel at these values:
sio1: configured irq 11 not in bitmap of probed irqs 0
sio1 not found at 0x2e8
Nothing else is on irq 11.
pccardd is running -- it supports my Xircom nicely.
Thanks,
Michael
--
Configuration data for card in slot 0
Tuple #1, code = 0xff (Terminator), length = 0
Code 128 not found
Code 128 not found
code Unknown ignored
Code 131 not found
Code 131 not found
code Unknown ignored
Configuration data for card in slot 1
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x15 (Version 1 info), length = 57
000: 04 01 54 6f 73 68 69 62 61 20 41 6d 65 72 69 63
010: 61 00 33 43 58 4d 30 35 36 2d 42 4e 57 00 33 43
020: 4f 4d 2f 4e 6f 74 65 57 6f 72 74 68 79 20 35 36
030: 4b 20 4d 6f 64 65 6d 00 ff
Version = 4.1, Manuf = [Toshiba America],card vers = [3CXM056-BNW]
Addit. info = [3COM/NoteWorthy 56K Modem],[ÿ]
Tuple #3, code = 0x20 (Manufacturer ID), length = 4
000: 01 01 2f 00
PCMCIA ID = 0x101, OEM ID = 0x2f
Tuple #4, code = 0x21 (Functional ID), length = 2
000: 02 01
Serial port/modem - POST initialize
Tuple #5, code = 0x1a (Configuration map), length = 5
000: 01 23 00 03 03
Reg len = 2, config register addr = 0x300, last config = 0x23
Registers: XX------
Tuple #6, code = 0x1b (Configuration entry), length = 16
000: e0 41 99 49 55 3e 3d aa 60 f8 03 07 30 ff ff 28
Config index = 0x20(default)
Interface byte = 0x41 (I/O) +RDY/-BSY active
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Continuous supply current: 3.5 x 100mA
Power down supply current: 3.5 x 10mA
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3f8 block length = 0x8
IRQ modes: Level
IRQs: 4 5 8 9 10 11 12 13 14 15
Max twin cards = 0
Misc attr: (Audio-BVD2) (Power down supported)
Tuple #7, code = 0x1b (Configuration entry), length = 7
000: 21 08 aa 60 f8 02 07
Config index = 0x21
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2f8 block length = 0x8
Tuple #8, code = 0x1b (Configuration entry), length = 7
000: 22 08 aa 60 e8 03 07
Config index = 0x22
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x3e8 block length = 0x8
Tuple #9, code = 0x1b (Configuration entry), length = 7
000: 23 08 aa 60 e8 02 07
Config index = 0x23
Card decodes 10 address lines, 8 Bit I/O only
I/O address # 1: block start = 0x2e8 block length = 0x8
Tuple #10, code = 0x22 (Functional EXT), length = 4
000: 00 02 0f 7c
Serial interface extension:
16550 UART, Parity - Space,Mark,Odd,Even,
Tuple #11, code = 0x22 (Functional EXT), length = 9
000: 01 1f 0f 00 06 00 00 06 00
Modem interface capabilities:
Tuple #12, code = 0x22 (Functional EXT), length = 12
000: 02 06 00 3f 1c 03 03 0f 07 00 02 b5
Data modem services available:
Tuple #13, code = 0x22 (Functional EXT), length = 8
000: 13 06 00 0f 00 02 00 b5
Tuple #14, code = 0x22 (Functional EXT), length = 8
000: 23 06 00 0f 00 02 00 b5
Tuple #15, code = 0x0 (Null tuple), length = 10
000: 02 01 2f 00 21 00 07 00 00 ff
Tuple #16, code = 0x0 (Null tuple), length = 14
000: 31 30 39 4e 31 43 37 38 33 35 37 32 00 ff
Tuple #17, code = 0x14 (No link), length = 0
Tuple #18, code = 0xff (Terminator), length = 0
2 slots found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?199910131540.LAA49189>