Date: Sun, 17 Oct 1999 00:55:45 +0200 From: Andreas Klemm <andreas@klemm.gtn.com> To: current@FreeBSD.ORG Subject: -current problem: Network cards doesn't run Message-ID: <19991017005544.B973@titan.klemm.gtn.com>
next in thread | raw e-mail | index | archive | help
See ed0....
When running a current kernel of some days ago, no problems.
Were there perhaps changes in the last days that introduce
this, that some NICs doesn't run ?
Even the xl0 interface didn't run (DMZ). Ping to hosts in
internet didn't succeed.
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
FreeBSD 4.0-CURRENT #0: Sun Oct 17 00:40:49 CEST 1999
root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 159383552 (155648K bytes)
avail memory = 151044096 (147504K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc030c000.
Pentium Pro MTRR support enabled
ccd0-3: Concatenated disk drivers
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
chip1: <Intel PIIX3 IDE controller> at device 7.1 on pci0
vga-pci0: <Matrox MGA 2064W graphics accelerator> at device 10.0 on pci0
xl0: <3Com 3c900-COMBO Etherlink XL> irq 19 at device 11.0 on pci0
xl0: Ethernet address: 00:60:97:aa:3a:db
xl0: selecting 10baseT transceiver, half duplex
pci0: unknown card (vendor=0x1102, dev=0x0002) at 12.0 irq 18
pci0: unknown card (vendor=0x1102, dev=0x7002) at 12.1
ahc0: <Adaptec 2940 Ultra SCSI adapter> irq 17 at device 13.0 on pci0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
ahc1: <Adaptec 2940 Ultra SCSI adapter> irq 16 at device 14.0 on pci0
ahc1: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <keyboard controller (i8042)> at port 0x60-0x6f on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <4 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
plip0: <PLIP network interface> on ppbus 0
lpt0: <generic printer> on ppbus 0
lpt0: Interrupt-driven port
ppi0: <generic parallel i/o> on ppbus 0
ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 10 on isa0
ed0: address 00:00:c0:5a:98:2a, type WD8013EPC (16 bit)
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, logging limited to 100 packets/entry by default
DUMMYNET initialized (990811)
Waiting 8 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
Creating DISK da0
Creating DISK da1
Creating DISK da2
Creating DISK da3
sa0 at ahc1 bus 0 target 4 lun 0
sa0: <TANDBERG TDC 4222 =07:> Removable Sequential Access SCSI-2 device
sa0: 4.807MB/s transfers (4.807MHz, offset 8)
Creating DISK cd0
Creating DISK cd1
changing root device to da0s2a
cd1 at ahc1 bus 0 target 5 lun 0
cd1: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 8)
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ahc0 bus 0 target 6 lun 0
cd0: <TEAC CD-R55S 1.0K> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da3 at ahc0 bus 0 target 3 lun 0
da3: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da3: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da1 at ahc0 bus 0 target 1 lun 0
da1: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <IBM DORS-32160 WA6A> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da2: 2063MB (4226725 512 byte sectors: 255H 63S/T 263C)
ed0: remote transmit DMA failed to complete
^^^^
ed0: NIC memory corrupt - invalid packet length 11564
^^^^
xl0: promiscuous mode enabled
--
Andreas Klemm http://www.FreeBSD.ORG/~andreas
http://www.freebsd.org/~fsmp/SMP/SMP.html
powered by Symmetric MultiProcessor FreeBSD
Get new songs from our band: http://www.freebsd.org/~andreas/64bits/index.html
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991017005544.B973>