Date: Sat, 25 Dec 1999 22:03:56 +0100 From: Andreas Klemm <andreas@klemm.gtn.com> To: vns@delta.odessa.ua Cc: current@FreeBSD.ORG Subject: can't get vmware to run ( on -current ) Message-ID: <19991225220356.A40880@titan.klemm.gtn.com>
next in thread | raw e-mail | index | archive | help
Hi ! Some time ago I fetched your vmware port from internet. I moved to -current because staroffice5 there is able to run with a SMP kernel. When trying to run vmware I encounter the following problems: This message shows up immediately after program start: kldload: can't load /usr/local/lib/vmware/lib/modules/vmmon.ko: Exec format error Then vmware programs starts, but a message box (which has to be accepted with ok button) shows an error: Cannot open /dev/tty0: No such file or directory. Virtual terminal initialization failed. Perhaps your kernel is not configured with virtual terminal support. What am I missing ??? Here my kernel config file: # # Kernel Config File: TITAN # # by Andreas Klemm, Sat Sep 25 21:30:05 CEST 1999 # machine i386 cpu I686_CPU ident TITAN maxusers 100 #makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options INCLUDE_CONFIG_FILE #Include this file in kernel options INET #InterNETworking options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options MFS #Memory Filesystem options NFS #Network Filesystem options MSDOSFS #MSDOS Filesystem options CD9660 #ISO 9660 Filesystem options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options UCONSOLE #Allow users to grab the console options KTRACE #ktrace(1) syscall trace support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options SOFTUPDATES #Softupdates options MD5 options NSWAPDEV=4 options COMPAT_LINUX options SHOW_BUSYBUFS options P1003_1B options _KPOSIX_PRIORITY_SCHEDULING options _KPOSIX_VERSION=199309L #options IPX #IPX/SPX communications protocols #options NCP #NetWare Core protocol #options NETATALK #Appletalk communications protocols #options CODA #CODA filesystem. #pseudo-device vcoda 4 #coda minicache <-> venus comm. # Size of the kernel message buffer. Should be N * pagesize. options MSGBUF_SIZE=40960 # To make an SMP kernel, the next two are needed options SMP # Symmetric MultiProcessor Kernel options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=4 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs # Options for the VM subsystem #options PQ_NOOPT # No coloring #options PQ_LARGECACHE # color for 512k/16k cache options PQ_HUGECACHE # color for 1024k/16k cache controller isa0 #controller pnp0 # PnP support for ISA controller pci0 # Floppy drives controller fdc0 at isa? port IO_FD1 irq 6 drq 2 device fd0 at fdc0 drive 0 # SCSI Controllers # A single entry for any of these controllers (ncr, ahb, ahc) is # sufficient for any number of installed devices. controller ahc0 # AHA2940 and onboard AIC7xxx devices # SCSI Options options SCSI_DELAY=8000 #Be pessimistic about Joe SCSI device options AHC_ALLOW_MEMIO # SCSI peripherals # Only one of each of these is needed, they are dynamically allocated. controller scbus0 # SCSI bus (required) device da0 # Direct Access (disks) device sa0 # Sequential Access (tape etc) device cd0 # CD device pass0 # Passthrough device (direct SCSI access) # atkbdc0 controls both the keyboard and the PS/2 mouse controller atkbdc0 at isa? port IO_KBD device atkbd0 at atkbdc? irq 1 device psm0 at atkbdc? irq 12 device vga0 at isa? port ? conflicts # splash screen/screen saver pseudo-device splash # syscons is the default console driver, resembling an SCO console device sc0 at isa? options MAXCONS=4 # number of virtual consoles options SC_HISTORY_SIZE=200 # number of history buffer lines # Floating point support - do not disable. device npx0 at nexus? port IO_NPX irq 13 # Serial (COM) ports device sio0 at isa? port IO_COM1 flags 0x10 irq 4 device sio1 at isa? port IO_COM2 irq 3 # Parallel port device ppc0 at isa? port? flags 0x40 irq 7 controller ppbus0 # Parallel port bus (required) device lpt0 # Printer device plip0 # TCP/IP over parallel device ppi0 # Parallel port interface device #controller vpo0 # Requires scbus and da0 # Network Options options MROUTING # Multicast routing options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about dropped packets options IPFIREWALL_FORWARD #enable xparent proxy support options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity options IPDIVERT #divert sockets options ICMP_BANDLIM options DUMMYNET # PCI Ethernet NICs that use the common MII bus controller code. controller miibus0 # MII bus support device xl0 # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. # The probe order of these is presently determined by i386/isa/isa_compat.c. device ed0 at isa? port 0x280 irq 10 iomem 0xd8000 # Pseudo devices - the number indicates how many units to allocated. pseudo-device loop # Network loopback pseudo-device ether # Ethernet support #pseudo-device sl 1 # Kernel SLIP #pseudo-device ppp 1 # Kernel PPP options PPP_BSDCOMP #PPP BSD-compress support options PPP_DEFLATE #PPP zlib/deflate/gzip support options PPP_FILTER #enable bpf filtering (needs bpfilter) pseudo-device tun # Packet tunnel. pseudo-device pty # Pseudo-ttys (telnet etc) pseudo-device gzip # Exec gzipped a.out's # The `bpf' pseudo-device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! pseudo-device bpf #Berkeley packet filter pseudo-device vn #Vnode driver (turns a file into a device) pseudo-device snp 3 #Snoop device - to look at pty/vty/etc.. pseudo-device ccd 4 #Concatenated disk driver # Luigis new sound driver #device pcm0 at isa? port ? tty irq 5 drq 1 flags 0x0 -- Andreas Klemm http://www.FreeBSD.ORG/~andreas http://www.freebsd.org/~fsmp/SMP/SMP.html powered by Symmetric MultiProcessor FreeBSD Get new songs from our band: http://www.freebsd.org/~andreas/64bits/index.html To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?19991225220356.A40880>