Date: Thu, 15 Jan 2004 16:18:24 -0700 From: "Chad Leigh -- Shire.Net LLC" <chad@shire.net> To: freebsd-questions@FreeBSD.ORG <freebsd-questions@freebsd.org> Subject: ACPI errors at bit on Abit BP-6 mb (since 5.1) on 5.2RC Message-ID: <1DFBBFD9-47B1-11D8-84FF-003065A70D30@shire.net>
next in thread | raw e-mail | index | archive | help
Hi.
I have been getting these errors at boot time on a dual CPU Abit BP-6.
This has been happening since I converted this old system into a test
system a while back with 5.1R. It still happens with 5.2RC. I have
not updated to 5.2R yet. It still seems to run fine and stably even
with the errors.
What do these mean?
Here is a dmesg
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.2-RC #1: Thu Jan 8 09:59:56 MST 2004
chad@nabiki.shire.net:/usr/obj/usr/src/sys/NABIKI-SMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a25000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a25244.
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Pentium II/Pentium II Xeon/Celeron (522.48-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x665 Stepping = 5
Features=0x183fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,
MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory = 671023104 (639 MB)
avail memory = 642166784 (612 MB)
ACPI APIC Table: <ABIT >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
ioapic0 <Version 1.1> irqs 0-23 on motherboard
Pentium Pro MTRR support enabled
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ABIT AWRDACPI> on motherboard
ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace,
AE_NOT_FOUND
SearchNode 0xc54fd260 StartNode 0xc54fd260 ReturnNode 0
ACPI-1287: *** Error: , AE_NOT_FOUND
pcibios: BIOS version 2.10
Using $PIR table, 8 entries at 0xc00fd7e0
acpi0: Power Button (fixed)
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
ACPI-1287: *** Error: Method execution failed
[\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc54fde40),
AE_AML_UNINITIALIZED_LOCAL
ACPI-0175: *** Error: Method execution failed
[\\_SB_.PCI0.ISA_.FDC0._CRS] (Node 0xc54fde40),
AE_AML_UNINITIALIZED_LOCAL
can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 -
AE_AML_UNINITIALIZED_LOCAL
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_cpu1: <CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace,
AE_NOT_FOUND
SearchNode 0xc54fd260 StartNode 0xc54fd260 ReturnNode 0
ACPI-1287: *** Error: , AE_NOT_FOUND
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port
0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem
0xd0000000-0xd3ffffff at device 0.0 on pci0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
isab0: <PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xf000-0xf00f at device
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata0: [MPSAFE]
ata1: at 0x170 irq 15 on atapci0
ata1: [MPSAFE]
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xc000-0xc01f irq
19 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <bridge, PCI-unknown> at device 7.3 (no driver attached)
dc0: <Intel 21143 10/100BaseTX> port 0xc400-0xc47f mem
0xda000000-0xda0003ff irq 18 at device 11.0 on pci0
dc0: Ethernet address: 00:c0:f0:4a:af:90
miibus0: <MII bus> on dc0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
pci0: <display, VGA> at device 13.0 (no driver attached)
aac0: <Adaptec SCSI RAID 2410SA> mem 0xd4000000-0xd7ffffff irq 16 at
device 15.0 on pci0
aac0: [MPSAFE]
aac0: Unknown processor 100MHz, 48MB cache memory, optional battery not
installed
aac0: Kernel 4.1-0, Build 9964, S/N b99c47
aac0: Supported
Options=1097c<WCACHE,DATA64,HOSTTIME,RAID50,WINDOW4GB,SOFTERR,ALARM>
atapci1: <HighPoint HPT366 UDMA66 controller> port
0xd400-0xd4ff,0xd000-0xd003,0xcc00-0xcc07 irq 18 at device 19.0 on pci0
atapci1: [MPSAFE]
ata2: at 0xcc00 on atapci1
ata2: [MPSAFE]
atapci2: <HighPoint HPT366 UDMA66 controller> port
0xe000-0xe0ff,0xdc00-0xdc03,0xd800-0xd807 irq 18 at device 19.1 on pci0
atapci2: [MPSAFE]
ata3: at 0xd800 on atapci2
ata3: [MPSAFE]
fdc0: cannot reserve I/O port range (1 ports)
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
fdc0: cannot reserve I/O port range (1 ports)
orm0: <Option ROMs> at iomem
0xef000-0xeffff,0xcd000-0xce7ff,0xc8000-0xcc7ff,0xc0000-0xc7fff on isa0
pmtimer0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
GEOM: create disk ad0 dp=0xc556dc60
ad0: 76319MB <WDC WD800JB-00CRA1> [155061/16/63] at ata0-master UDMA33
GEOM: create disk ad4 dp=0xc5670d60
ad4: 38172MB <MAXTOR 6L040L2> [77557/16/63] at ata2-master UDMA66
GEOM: create disk ad6 dp=0xc5670c60
ad6: 38172MB <MAXTOR 6L040L2> [77557/16/63] at ata3-master UDMA66
aacd0: <RAID 1 (Mirror)> on aac0
aacd0: 190733MB (390622720 sectors)
GEOM: create disk aacd0 dp=0xc567158c
aacd1: <Volume> on aac0
aacd1: 190733MB (390622720 sectors)
GEOM: create disk aacd1 dp=0xc567148c
SMP: AP CPU #1 Launched!
Mounting root from ufs:/dev/ad0s1a
ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace,
AE_NOT_FOUND
SearchNode 0xc54fd260 StartNode 0xc54fd260 ReturnNode 0
ACPI-1287: *** Error: , AE_NOT_FOUND
ACPI-0438: *** Error: Looking up [\\_PR_.CPU0] in namespace,
AE_NOT_FOUND
SearchNode 0xc54fd260 StartNode 0xc54fd260 ReturnNode 0
ACPI-1287: *** Error: , AE_NOT_FOUND
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1DFBBFD9-47B1-11D8-84FF-003065A70D30>