Date: Sun, 17 Feb 2013 09:24:23 -0700 From: Jan Beich <jbeich@tormail.org> To: freebsd-usb@freebsd.org Subject: sdcard read error with nokia n8 as mass storage Message-ID: <1U77My-000GSe-V1@internal.tormail.org>
next in thread | raw e-mail | index | archive | help
The phone has 16G of on-board and 16G sdcard memory. FreeBSD 10.0 detects both but only the former can be mounted. And there is no issue mounting the sdcard on Ubuntu or on FreeBSD via iSCSI (fileio). $ dmesg # freebsd ugen7.2: <Nokia> at usbus7 umass0: <USB Mass Storage Interface> on usbus7 umass0: SCSI over Bulk-Only; quirks = 0x4000 umass0:5:0:-1: Attached to scbus5 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0 da0: < > Removable Direct Access SCSI-0 device da0: 1.000MB/s transfers da0: 14644MB (29990912 512 byte sectors: 255H 63S/T 1866C) da1 at umass-sim0 bus 0 scbus5 target 0 lun 1 da1: < > Removable Direct Access SCSI-0 device da1: 1.000MB/s transfers da1: 15193MB (31116288 512 byte sectors: 255H 63S/T 1936C) (da1:umass-sim0:0:0:1): READ(10). CDB: 28 20 00 00 00 00 00 00 01 00 (da1:umass-sim0:0:0:1): CAM status: SCSI Status Error (da1:umass-sim0:0:0:1): SCSI status: Check Condition (da1:umass-sim0:0:0:1): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da1:umass-sim0:0:0:1): Error 22, Unretryable error (da1:umass-sim0:0:0:1): READ(10). CDB: 28 20 00 00 00 00 00 00 01 00 (da1:umass-sim0:0:0:1): CAM status: SCSI Status Error (da1:umass-sim0:0:0:1): SCSI status: Check Condition (da1:umass-sim0:0:0:1): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB) (da1:umass-sim0:0:0:1): Error 22, Unretryable error $ dmesg # ubuntu [ 2702.696789] usb 2-1.5: new high-speed USB device number 5 using ehci_hcd [ 2702.792029] scsi8 : usb-storage 2-1.5:1.0 [ 2703.789565] scsi 8:0:0:0: Direct-Access PQ: 0 ANSI: 0 [ 2703.790440] scsi 8:0:0:1: Direct-Access PQ: 0 ANSI: 0 [ 2703.792026] sd 8:0:0:0: Attached scsi generic sg2 type 0 [ 2703.792839] sd 8:0:0:1: Attached scsi generic sg3 type 0 [ 2703.797851] sd 8:0:0:0: [sdb] Attached SCSI removable disk [ 2703.798468] sd 8:0:0:1: [sdc] Attached SCSI removable disk [ 2706.096533] sd 8:0:0:1: [sdc] 31116288 512-byte logical blocks: (15.9 GB/14.8 GiB) [ 2706.097650] sd 8:0:0:1: [sdc] No Caching mode page present [ 2706.097658] sd 8:0:0:1: [sdc] Assuming drive cache: write through [ 2706.100061] sd 8:0:0:0: [sdb] 29990912 512-byte logical blocks: (15.3 GB/14.3 GiB) [ 2706.101756] sd 8:0:0:1: [sdc] No Caching mode page present [ 2706.101762] sd 8:0:0:1: [sdc] Assuming drive cache: write through [ 2706.102249] sd 8:0:0:0: [sdb] No Caching mode page present [ 2706.102255] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 2706.107070] sdc: sdc1 [ 2706.123044] sd 8:0:0:0: [sdb] No Caching mode page present [ 2706.123051] sd 8:0:0:0: [sdb] Assuming drive cache: write through [ 2706.126055] sdb: $ file -s /dev/da1 # native /dev/da1: ERROR: cannot read `/dev/da1' (Input/output error) $ file -s /dev/da1 # iscsi /dev/da1: x86 boot sector; partition 1: ID=0xc, starthead 130, startsector 8192, 31108096 sectors, extended partition table (last)\011, code offset 0x0 $ file -s /dev/da1s1 # iscsi /dev/da1s1: x86 boot sector, code offset 0x0, OEM-ID " EPOC", sectors/cluster 64, reserved sectors 598, Media descriptor 0xf8, heads 255, hidden sectors 8192, sectors 31108096 (volumes > 32 MB) , FAT (32 bit), sectors/FAT 3797, reserved3 0x800000, serial number 0x316d446c, label: "Memory card" Any clue? I've tried UQ_MSC_NO_SYNC_CACHE with no luck. -- $ usbdump -i usbus7 -s 0 -vvv # on attach <http://pastebin.com/mQ472uQJ>; $ usbconfig -d 7.2 dump_device_desc ugen7.2: <N8-00 Nokia> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x0421 idProduct = 0x0301 bcdDevice = 0x0100 iManufacturer = 0x0001 <Nokia> iProduct = 0x0002 <N8-00> iSerialNumber = 0x0003 <secret> bNumConfigurations = 0x0001 $ usbconfig -d 7.2 dump_curr_config_desc ugen7.2: <N8-00 Nokia> at usbus7, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON (500mA) Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0023 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0004 <Bulk transfer method configuration> bmAttributes = 0x0080 bMaxPower = 0x00fa Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x0008 bInterfaceSubClass = 0x0006 bInterfaceProtocol = 0x0050 iInterface = 0x0006 <USB Mass Storage Interface> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0001 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0200 bInterval = 0x0000 bRefresh = 0x0000 bSynchAddress = 0x0000 Additional Descriptor bLength = 0x03 bDescriptorType = 0x09 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x03, 0x09, 0x00
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?1U77My-000GSe-V1>