Date: Mon, 18 Mar 1996 16:09:32 -1000 From: Andrew Foster <adf@fl.net.au> To: hackers@freebsd.org Subject: Rebooting. Message-ID: <2.2.32.19960319020932.009c8a2c@mail.fl.net.au>
next in thread | raw e-mail | index | archive | help
Hi,
I've just replaced the SCSI controller in my 'dud' machine and it still
reboots. This is my dmesg as of a few hours after the reboot occurred :
FreeBSD 2.1-STABLE #0: Sat Mar 16 18:24:20 1996
adf@cafu.fl.net.au:/usr/src/stable/sys/compile/IMP
CPU: 90-MHz Pentium 735\\90 (Pentium-class CPU)
Origin = "GenuineIntel" Id = 0x524 Stepping=4
Features=0x1bf<FPU,VME,DE,PSE,TSC,MSR,MCE,CX8>
real memory = 33554432 (32768K bytes)
avail memory = 30699520 (29980K bytes)
Probing for devices on PCI bus 0:
chip0 <Intel 82437 (Triton)> rev 2 on pci0:0
chip1 <Intel 82371 (Triton)> rev 2 on pci0:7
ahc0 <Adaptec 2940 Ultra SCSI host adapter> rev 0 int a irq 10 on pci0:11
ahc0: aic7880 Single Channel, SCSI Id=7, 16 SCBs
ahc0 waiting for scsi devices to settle
(ahc0:0:0): "QUANTUM FIREBALL1080S 1Q08" type 0 fixed SCSI 2
sd0(ahc0:0:0): Direct-Access 1042MB (2134305 512 byte sectors)
(ahc0:1:0): "SEAGATE ST15230N 0298" type 0 fixed SCSI 2
sd1(ahc0:1:0): Direct-Access 4095MB (8386733 512 byte sectors)
(ahc0:2:0): "IBM DPES-31080 S31Q" type 0 fixed SCSI 2
sd2(ahc0:2:0): Direct-Access 1034MB (2118144 512 byte sectors)
(ahc0:4:0): "WANGTEK 6130-HS 4W17" type 1 removable SCSI 2
st0(ahc0:4:0): Sequential-Access density code 0x13, drive empty
Probing for devices on the ISA bus:
sc0 at 0x60-0x6f irq 1 on motherboard
sc0: VGA color <16 virtual consoles, flags=0x0>
ed0 not found at 0x280
ed1 at 0x300-0x31f irq 5 on isa
ed1: address 00:00:01:06:49:18, type NE2000 (16 bit)
sio0 at 0x3f8-0x3ff irq 4 on isa
sio0: type 16550A
sio1 at 0x2f8-0x2ff irq 3 on isa
sio1: type 16550A
sio2 not found at 0x3e8
sio3 not found at 0x2e8
lpt0 at 0x378-0x37f irq 7 on isa
lpt0: Interrupt-driven port
lp0: TCP/IP capable interface
lpt1 not found at 0xffffffff
lpt2 not found at 0xffffffff
fdc0 at 0x3f0-0x3f7 irq 6 drq 2 on isa
fdc0: NEC 72065B
fd0: 1.44MB 3.5in
wdc0 at 0x1f0-0x1f7 irq 14 on isa
wdc0: unit 0 (wd0): <Maxtor 71260 AP>
wd0: 1204MB (2467584 sectors), 2448 cyls, 16 heads, 63 S/T, 512 B/S
aha0 not found at 0x330
aic0 not found at 0x340
scd0 not found at 0x230
npx0 on motherboard
npx0: INT 16 interface
changing root device to sd0a
WARNING: / was not properly dismounted.
pid 182 (innd), uid 8: exited on signal 11
in_rtqtimo: adjusted rtq_reallyold to 2400
in_rtqtimo: adjusted rtq_reallyold to 1600
in_rtqtimo: adjusted rtq_reallyold to 1066
in_rtqtimo: adjusted rtq_reallyold to 710
I've gone from an NCR to the 2940 controller with no real improvement.
Someone said it could be something to do with the VM system? swapinfo -k
shows :
Device 1K-blocks Used Avail Capacity Type
/dev/wd0s2c 507024 39180 467780 8% Interleaved
Thanks,
Andrew Foster
-----------
Andrew Foster
Sydney, Australia
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?2.2.32.19960319020932.009c8a2c>