Date: Thu, 16 Mar 2000 21:12:39 -0500 From: "Crist J. Clark" <cjc@cc942873-a.ewndsr1.nj.home.com> To: David Banning <tracker@worldy.com> Cc: questions@FreeBSD.ORG Subject: Re: how do I get a new MAKEDEV? Message-ID: <20000316211239.C64407@cc942873-a.ewndsr1.nj.home.com> In-Reply-To: <Pine.BSF.4.05.10003161845510.11078-100000@>; from tracker@worldy.com on Thu, Mar 16, 2000 at 06:49:47PM %2B0000 References: <Pine.BSF.4.05.10003161845510.11078-100000@>
next in thread | previous in thread | raw e-mail | index | archive | help
--SUOF0GtieIMvvwua Content-Type: text/plain; charset=us-ascii On Thu, Mar 16, 2000 at 06:49:47PM +0000, David Banning wrote: > I recently upgraded to 3.1 from 2.2.8 and I seem to > be missing form acd?? drivers for my cdrom(s) > the MAKEDEV was not replaced in the cvsup and > the old one only makes the older devices. I have > been following others questions and answers and it seems the answer > I hear most often is to get an up-to-date MAKEDEV. > How to? Here's the present 3-STABLE one. Not guaranteed to be 100% compatible with 3.1R, but I would expect it to be OK. It definately has acd devices. -- Crist J. Clark cjclark@home.com --SUOF0GtieIMvvwua Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=MAKEDEV #!/bin/sh - # # Copyright (c) 1990 The Regents of the University of California. # All rights reserved. # # Written and contributed by W. Jolitz 12/90 # # Redistribution and use in source and binary forms are permitted provided # that: (1) source distributions retain this entire copyright notice and # comment, and (2) distributions including binaries display the following # acknowledgement: ``This product includes software developed by the # University of California, Berkeley and its contributors'' in the # documentation or other materials provided with the distribution and in # all advertising materials mentioning features or use of this software. # Neither the name of the University nor the names of its contributors may # be used to endorse or promote products derived from this software without # specific prior written permission. # THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED # WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF # MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. # # @(#)MAKEDEV 5.2 (Berkeley) 6/22/90 # # Device "make" file. Valid arguments: # all makes all known devices, standard number of units (or close) # std standard devices # local configuration specific devices # mach-4 mach4&lites+devices for Mach's XFree86 distribution # (see http://www.cs.hut.fi/lites.html for more info on LITES) # # Tapes: # wt* QIC-interfaced (e.g. not SCSI) 3M cartridge tape # sa* SCSI Sequential Access Devices # ft* QIC-40/QIC-80 3M cartridge tape (interfaced # via the floppy disk controller) # # Disks: # wd* "Winchester" disk drives (ST506,IDE,ESDI,RLL,...) # wfd* "IDE floppy" disk drives (LS-120) # fd* "floppy" disk drives (3 1/2", 5 1/4") # da* "SCSI Direct Access Devices" # cd* "SCSI CD-ROM disks" # sd* "SCSI disk", antiquated, use da* instead # mcd* "Mitsumi CD-ROM disks" # scd* "Sony CD-ROM disks" # matcd* "Matsushita (Panasonic) CD-ROM disks" # acd* "ATAPI CD-ROM disks" # vn* "vnode disks" # fla* "M-Systems DiskOnChip" # # Console ports: # vty* virtual console devices for syscons/pcvt/codrv # # Pointing devices: # mse* Logitech and ATI Inport bus mouse # psm* PS/2 mouse # sysmouse Mousesystems mouse emulator for syscons # # Time devices: # refclock-* serial ports used by xntpd parse refclocks # # Terminal ports: # tty* general purpose serial ports # cua* dialout serial ports # ttyA* Specialix SI/XIO dialin ports ('*' = number of devices) # cuaA* Specialix SI/XIO dialout ports # ttyD* Digiboard - 16 dialin ports # cuaD* Digiboard - 16 dialout ports # ttyR* Rocketport dialin ports # cuaR* Rocketport dialout ports # # Pseudo terminals: # pty* set of 32 master and slave pseudo terminals # vty* virtual terminals using syscons/pcvt/codrv console # # Parallel port: # lpt* Printer # ppi* Parallel port i/o # pps* Pulse per second timing interface # # I2C and SMBus: # iic* I2C devices # smb* SMBUS devices # # USB devices: # usb* USB bus control device # ums* mouse # ulpt* printer # ugen* generic USB device # # SCSI devices (other than CD-ROM, tape and disk): # ssc The ``super scsi'' device # worm* WORM driver # pt* Processor Type (HP scanner, as one example) # pass* CAM Passthrough device # # PC-CARD (previously called PCMCIA) support # card* PC-CARD slots # # ISDN devices: # i4b isdnd call control device # i4bctl debugging control device # i4btrc* trace data interface(s), one per passive card # i4btel* telephony interface(s) # i4bteld* telephony dialout interface(s) # i4brbch* raw b channel access device(s) # # Special purpose devices: # apm Advanced Power Management BIOS # apmctl APM BIOS control device # bpf* packet filter # speaker pc speaker # tw* xten power controller # snd* various sound cards # pcaudio PCM audio driver # socksys iBCS2 socket system driver # vat VAT compatibility audio driver (requires snd*) # gsc Genius GS-4500 hand scanner # joy pc joystick # tun* Tunneling IP device # snp* tty snoop devices # spigot Video Spigot video acquisition card # ctx* Cortex-I video acquisition card # meteor* Matrox Meteor video acquisition card (pci) # bktr* Bt848 based video acquisition card (pci) # labpc* National Instrument's Lab-PC and LAB-PC+ # perfmon CPU performance-monitoring counters # pci PCI configuration-space access from user mode # ipl ipfilter control devices (ipl, ipnat, ipstate, ipauth) # kbd keyboard devices # # $FreeBSD: src/etc/etc.i386/MAKEDEV,v 1.183.2.16 1999/11/15 22:14:50 joe Exp $ # PATH=/sbin:/bin/:/usr/bin:/usr/sbin:$PATH umask 77 # Usage: die exitcode msg die() { echo $2 exit $1 } # Convert integer to partition name dkitop() { local p case $1 in 0) p=a;; 1) p=b;; 2) p=c;; 3) p=d;; 4) p=e;; 5) p=f;; 6) p=g;; 7) p=h;; *) p="?";; esac echo $p } # Convert integer to slice name dkitos() { local s case $1 in 0) s="";; 1) s="";; *) s=s$(($1-1));; esac echo $s } # Convert disk (type, unit, slice, partition) to minor number dkminor() { echo $(($1 << 25 | ($2 / 32) << 21 | ($2 % 32) << 3 | $3 << 16 | $4)) } # Convert tape (ctrl, unit, mode, access) to minor number saminor() { echo $(($1 << 29 | ($2 / 16) << 16 | ($2 % 16) << 4 | $3 << 2 | $4)) } # Override mknod(2) to add extra handling to it. mknod() { rm -f "$1" || exit 1 /sbin/mknod "$@" || die 2 "/sbin/mknod $@ failed" chown root:wheel "$1" || exit 1 } # Convert the last character of a tty name to a minor number. ttyminor() { case $unit in [0-9]) m=$unit;; a) m=10;; b) m=11;; c) m=12;; d) m=13;; e) m=14;; f) m=15;; g) m=16;; h) m=17;; i) m=18;; j) m=19;; k) m=20;; l) m=21;; m) m=22;; n) m=23;; o) m=24;; p) m=25;; q) m=26;; r) m=27;; s) m=28;; t) m=29;; u) m=30;; v) m=31;; *) m="?";; esac echo $m } # Raw partition for disks dkrawpart=2 # Compatibility slice for disks dkcompatslice=0 # Raw slice for disks dkrawslice=1 # Standard umasks disk_umask=037 # allow group operator to read disks tape_umask=017 # allow group operator to read/write tapes for i in $*; do case $i in all) sh MAKEDEV std # standard sh MAKEDEV fd0 fd1 # bdev, floppy disk sh MAKEDEV da0 da1 da2 da3 wd0 wd1 wd2 wd3 # bdev, ordinary disk sh MAKEDEV wfd0 # bdev, LS-120 floppy sh MAKEDEV vn0 # bdev, virtual disk sh MAKEDEV cd0 matcd0 mcd0 scd0 acd0 # bdev, cdrom sh MAKEDEV ft0 sa0 wt0 wst0 # bdev, tape sh MAKEDEV vty12 # cdev, virtual tty sh MAKEDEV cuaa0 cuaa1 cuaa2 cuaa3 # cdev, serial tty sh MAKEDEV pty0 # cdev, pseudo tty sh MAKEDEV ttyd0 ttyd1 ttyd2 ttyd3 # cdev, serial tty sh MAKEDEV kbd0 # cdev, keyboard sh MAKEDEV mse0 psm0 sysmouse # cdev, mouse sh MAKEDEV pcaudio speaker # cdev, noise sh MAKEDEV lpt0 lpt1 lpt2 # cdev, printer sh MAKEDEV ppi0 ppi1 ppi2 # cdev, parallel port sh MAKEDEV iic0 iic1 # cdev, I2C device sh MAKEDEV smb0 smb1 # cdev, SMBus device sh MAKEDEV usb0 ums0 ulpt0 ugen0 # cdev, USB devices sh MAKEDEV bpf0 ipl tun0 # cdev, network sh MAKEDEV ch0 perfmon tw0 # cdev, miscellaneous sh MAKEDEV apm apmctl card0 card1 # cdev, laptop sh MAKEDEV pass4 xpt2 # cdev, CAM sh MAKEDEV i4b i4bctl i4btrc0 i4btrc1 # cdev, ISDN sh MAKEDEV i4btel0 i4btel1 i4bteld0 i4bteld1 # cdev, ISDN sh MAKEDEV i4brbch0 i4brbch1 # cdev, ISDN ;; std) mknod console c 0 0; chmod 600 console mknod drum c 4 0; chmod 640 drum; chgrp kmem drum mknod kmem c 2 1; chmod 640 kmem; chgrp kmem kmem mknod mem c 2 0; chmod 640 mem; chgrp kmem mem mknod null c 2 2; chmod 666 null mknod random c 2 3; chmod 644 random mknod urandom c 2 4; chmod 644 urandom mknod zero c 2 12; chmod 666 zero mknod io c 2 14; chmod 600 io mknod tty c 1 0; chmod 666 tty mknod klog c 7 0; chmod 600 klog mknod stdin c 22 0; chmod 666 stdin mknod stdout c 22 1; chmod 666 stdout mknod stderr c 22 2; chmod 666 stderr mknod lkm c 32 0; chmod 644 lkm mknod pci c 78 0; chmod 644 pci mkdir -p fd (cd fd && eval `echo "" | awk ' BEGIN { \ for (i = 0; i < 64; i++) \ printf("mknod %d c 22 %d;", i, i)}'`) chown -R bin:bin fd chmod 555 fd chmod 666 fd/* ;; mach-4) mknod iopl c 22 0 mknod kbd c 23 0 mknod mouse c 24 0 mknod time c 25 0 mknod timezone c 26 0 ;; # Create device files for new Archive/Wangtek QIC-02 tape driver (vak) wt*) umask $tape_umask u=`expr $i : '..\(.*\)'` if [ x$u = x ]; then u=0; fi mknod rwt${u} c 10 `expr 0 + $u` # default density, 512b blocks mknod nrwt${u} c 10 `expr 4 + $u` # mknod rWt${u} c 10 `expr 64 + $u` # default density, 1024b blocks # mknod nrWt${u} c 10 `expr 68 + $u` mknod rwt${u}b c 10 `expr 16 + $u` # 60 megabytes mknod nrwt${u}b c 10 `expr 20 + $u` mknod rwt${u}c c 10 `expr 24 + $u` # 120 megabytes mknod nrwt${u}c c 10 `expr 28 + $u` mknod rwt${u}d c 10 `expr 32 + $u` # 150 megabytes mknod nrwt${u}d c 10 `expr 36 + $u` # mknod rwt${u}e c 10 `expr 40 + $u` # 300 megabytes? # mknod nrwt${u}e c 10 `expr 44 + $u` # mknod rwt${u}f c 10 `expr 48 + $u` # 600 megabytes? # mknod nrwt${u}f c 10 `expr 52 + $u` chgrp operator r[Ww]t$u nr[Ww]t$u r[Ww]t$u[a-f] nr[Ww]t$u[a-f] umask 77 ;; # Individual slices. sd*s*|da*s*|vn*s*|wd*s*|wfd*s*|fla*s*) umask $disk_umask case $i in fla*s*) name=fla; blk=28; chr=102;; sd*s*) name=sd; blk=4; chr=13;; da*s*) name=da; blk=4; chr=13;; vn*s*) name=vn; blk=15; chr=43;; wd*s*) name=wd; blk=0; chr=3;; wfd*s*) name=wfd; blk=1; chr=87;; esac case $i in fla*s*|wfd*s*) unit=`expr $i : '...\([0-9]*\)s'` slice=`expr $i : '...[0-9]*s\([0-9]*\)'` part=`expr $i : '...[0-9]*s[0-9]*\(.*\)'` ;; *) unit=`expr $i : '..\([0-9]*\)s'` slice=`expr $i : '..[0-9]*s\([0-9]*\)'` part=`expr $i : '..[0-9]*s[0-9]*\(.*\)'` ;; esac case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) case $slice in [0-9]|[1-2][0-9]|30) oldslice=$slice slice=$(($slice+1)) slicename=`dkitos $slice` minor=`dkminor 0 $unit $slice $dkrawpart` mknod $name$unit$slicename b $blk $minor mknod r$name$unit$slicename c $chr $minor case $part in [a-h]) case $oldslice in 0) slice=$oldslice ;; esac for part in 0 1 2 3 4 5 6 7 do minor=`dkminor 0 $unit $slice $part` partname=`dkitop $part` mknod $name$unit$slicename$partname \ b $blk $minor mknod r$name$unit$slicename$partname \ c $chr $minor done ;; "") ;; *) echo bad partition for disk in: $i ;; esac chgrp operator $name$unit$slicename* \ r$name$unit$slicename* ;; *) echo bad slice for disk in: $i ;; esac ;; *) echo bad unit for disk in: $i "(unit=$unit, slice=$slice, part=$part)" ;; esac umask 77 ;; fd*) umask $disk_umask unit=`expr $i : '..\(.*\)'` name=fd; blk=2; chr=9 case $unit in 0|1|2|3) mknod ${name}${unit} b $blk `expr $unit '*' 64` mknod r${name}${unit} c $chr `expr $unit '*' 64` # Fake BSD partitions for i in a b c d e f g h do ln -f ${name}${unit} ${name}${unit}$i ln -f r${name}${unit} r${name}${unit}$i done # User-readable and programmer-readable name sets mknod ${name}${unit}.1720 b $blk `expr $unit '*' 64 + 1` mknod r${name}${unit}.1720 c $chr `expr $unit '*' 64 + 1` # ln -f ${name}${unit}.1720 ${name}${unit}135hs21 # ln -f r${name}${unit}.1720 r${name}${unit}135hs21 mknod ${name}${unit}.1480 b $blk `expr $unit '*' 64 + 2` mknod r${name}${unit}.1480 c $chr `expr $unit '*' 64 + 2` # ln -f ${name}${unit}.1480 ${name}${unit}135hs18 # ln -f r${name}${unit}.1480 r${name}${unit}135hs18 # ln -f ${name}${unit}.1480 ${name}${unit}96hs18 # ln -f r${name}${unit}.1480 r${name}${unit}96hs18 mknod ${name}${unit}.1440 b $blk `expr $unit '*' 64 + 3` mknod r${name}${unit}.1440 c $chr `expr $unit '*' 64 + 3` # ln -f ${name}${unit}.1440 ${name}${unit}135 # ln -f r${name}${unit}.1440 r${name}${unit}135 # ln -f ${name}${unit}.1440 ${name}${unit}135ds18 # ln -f r${name}${unit}.1440 r${name}${unit}135ds18 # ln -f ${name}${unit}.1440 ${name}${unit}96ds18 # ln -f r${name}${unit}.1440 r${name}${unit}96ds18 mknod ${name}${unit}.1200 b $blk `expr $unit '*' 64 + 4` mknod r${name}${unit}.1200 c $chr `expr $unit '*' 64 + 4` # ln -f ${name}${unit}.1200 ${name}${unit}96 # ln -f r${name}${unit}.1200 r${name}${unit}96 # ln -f ${name}${unit}.1200 ${name}${unit}96ds15 # ln -f r${name}${unit}.1200 r${name}${unit}96ds15 # ln -f ${name}${unit}.1200 ${name}${unit}135ds15 # ln -f r${name}${unit}.1200 r${name}${unit}135ds15 mknod ${name}${unit}.820 b $blk `expr $unit '*' 64 + 5` mknod r${name}${unit}.820 c $chr `expr $unit '*' 64 + 5` # ln -f ${name}${unit}.820 ${name}${unit}96hs10 # ln -f r${name}${unit}.820 r${name}${unit}96hs10 # ln -f ${name}${unit}.820 ${name}${unit}135hs10 # ln -f r${name}${unit}.820 r${name}${unit}135hs10 mknod ${name}${unit}.800 b $blk `expr $unit '*' 64 + 6` mknod r${name}${unit}.800 c $chr `expr $unit '*' 64 + 6` # ln -f ${name}${unit}.800 ${name}${unit}96ds10 # ln -f r${name}${unit}.800 r${name}${unit}96ds10 # ln -f ${name}${unit}.800 ${name}${unit}135ds10 # ln -f r${name}${unit}.800 r${name}${unit}135ds10 mknod ${name}${unit}.720 b $blk `expr $unit '*' 64 + 7` mknod r${name}${unit}.720 c $chr `expr $unit '*' 64 + 7` # ln -f ${name}${unit}.720 ${name}${unit}96ds9 # ln -f r${name}${unit}.720 r${name}${unit}96ds9 # ln -f ${name}${unit}.720 ${name}${unit}135ds9 # ln -f r${name}${unit}.720 r${name}${unit}135ds9 mknod ${name}${unit}.360 b $blk `expr $unit '*' 64 + 8` mknod r${name}${unit}.360 c $chr `expr $unit '*' 64 + 8` # ln -f ${name}${unit}.360 ${name}${unit}48 # ln -f r${name}${unit}.360 r${name}${unit}48 # ln -f ${name}${unit}.360 ${name}${unit}48ds9 # ln -f r${name}${unit}.360 r${name}${unit}48ds9 chgrp operator ${name}${unit}* r${name}${unit}* ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; ft*) umask $tape_umask unit=`expr $i : '..\(.*\)'` name=ft; blk=2; chr=9 case $unit in 0|1|2|3) mknod ${name}${unit} b $blk `expr $unit '*' 64 + 32` mknod r${name}${unit} c $chr `expr $unit '*' 64 + 32` ln -f ${name}${unit} ${name}${unit}a ln -f r${name}${unit} r${name}${unit}a chgrp operator ${name}${unit}* r${name}${unit}* ;; *) echo bad unit for tape in: $i ;; esac umask 77 ;; sd*|od*|da*|vn*|wd*|wfd*|fla*) umask $disk_umask case $i in fla*) name=fla; blk=28; chr=102;; sd*) name=sd; blk=4; chr=13;; od*) name=od; blk=4; chr=13;; da*) name=da; blk=4; chr=13;; vn*) name=vn; blk=15; chr=43;; wd*) name=wd; blk=0; chr=3;; wfd*) name=wfd; blk=1; chr=87;; esac case $i in fla*|wfd*) unit=`expr $i : '...\(.*\)'` ;; *) unit=`expr $i : '..\(.*\)'` ;; esac case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) for slicepartname in s0h s1 s2 s3 s4 do sh MAKEDEV $name$unit$slicepartname done ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; ccd*) umask $disk_umask name=ccd blk=21; chr=74 unit=`expr $i : '...\(.*\)'` case $unit in [0-9]|[0-9][0-9]|[0-4][0-9][0-9]|50[0-9]|51[0-1]) for part in 0 1 2 3 4 5 6 7 do minor=`dkminor 0 $unit 0 $part` partname=`dkitop $part` mknod $name$unit$partname b $blk $minor mknod r$name$unit$partname c $chr $minor done chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; ssc*) mknod ssc c 49 0 ;; # SCSI processor type driver pt[0-9]*) chr=61 name=pt unit=`expr $i : 'pt\([0-9][0-9]*\)'` if [ "X${unit}" = "X" ]; then unit=0 fi unit=`expr $unit + 1 - 1` mknod ${name}${unit} c $chr $unit ;; # SCSI target mode sample driver targ[0-9]*) chr=65 name=targ unit=`expr $i : 'targ\([0-9][0-9]*\)'` if [ "X${unit}" = "X" ]; then unit=0 fi unit=`expr $unit + 1 - 1` mknod ${name}${unit} c $chr $unit mknod ${name}.ctl c $chr 0xffff00ff ;; # CAM transport layer device xpt*) umask 077 # This major number is temporary chr=104 name=xpt units=`expr $i : 'xpt\(.*\)'` if [ "X${units}" = "X" ]; then units=1 fi eval `echo ${chr} ${units} ${name} |awk \ '{ c=$1; n=$2; name=$3;} END { for (i = 0; i < n; i++) printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \ chgrp operator %s%d;", \ name, i, name, i, name, i, c, i, \ name, i); }'` ;; # CAM passthrough device pass*|uk*) umask 077 # This major number is temporary chr=31 name=pass units=`expr $i : 'pass\(.*\)'` if [ "X${units}" = "X" ]; then units=1 fi eval `echo ${chr} ${units} ${name} |awk \ '{ c=$1; n=$2; name=$3;} END { for (i = 0; i < n; i++) printf("rm -f %s%d r%s%d; mknod %s%d c %d %d; \ chgrp operator %s%d;", \ name, i, name, i, name, i, c, i, \ name, i); }'` ;; pty*) class=`expr $i : 'pty\(.*\)'` case $class in 0) offset=0 name=p;; 1) offset=32 name=q;; 2) offset=64 name=r;; 3) offset=96 name=s;; # Note that xterm (at least) only look at p-s. 4) offset=128 name=P;; 5) offset=160 name=Q;; 6) offset=192 name=R;; 7) offset=224 name=S;; # This still leaves [tuTU]. *) echo bad unit for pty in: $i;; esac case $class in 0|1|2|3|4|5|6|7) umask 0 eval `echo $offset $name | awk ' { b=0+$1; n=$2 } END { \ for (i = 0; i < 32; i++) { c = substr("0123456789abcdefghijklmnopqrstuv", i + 1, 1); \ printf("mknod tty%s%s c 5 %d; \ mknod pty%s%s c 6 %d;", \ n, c, b+i, \ n, c, b+i); \ } \ }'` umask 77 ;; esac ;; sa*) umask $tape_umask unit=`expr $i : '..\(.*\)'` chr=14 case $unit in [0-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]) mknod rsa${unit}.ctl c $chr `saminor 1 ${unit} 0 0` for m in 0 1 2 3 do mknod rsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 0` mknod nrsa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 1` mknod ersa${unit}.${m} c $chr `saminor 0 ${unit} ${m} 2` chgrp operator rsa${unit}.${m} nrsa${unit}.${m} \ ersa${unit}.${m} done ln -f rsa${unit}.0 rsa${unit} ln -f nrsa${unit}.0 nrsa${unit} ln -f ersa${unit}.0 ersa${unit} ;; *) echo bad unit for tape in: $i ;; esac umask 77 ;; ch*) umask 37 unit=`expr $i : '..\(.*\)'` case $i in ch*) name=ch; chr=17;; esac case $unit in 0|1|2|3|4|5|6) mknod ${name}${unit} c $chr $unit chgrp operator ${name}${unit} ;; *) echo bad unit for media changer in: $i ;; esac umask 77 ;; cd*|mcd*|scd*) umask $disk_umask case $i in cd*) units=`expr $i : '..\(.*\)'`; name=cd; blk=6; chr=15;; mcd*) units=`expr $i : '...\(.*\)'`; name=mcd; blk=7; chr=29;; scd*) units=`expr $i : '...\(.*\)'`; name=scd; blk=16; chr=45;; esac if [ "X${units}" = "X" -o ${units} -le 0 ]; then units=1 fi if [ "${units}" -le 31 ]; then eval `echo ${chr} ${blk} ${units} ${name} |awk \ '{ c=$1; b=$2; n=$3; name=$4;} END{ for (i = 0; i < n; i++){ printf("rm -f %s%d* r%s%d*; \ mknod %s%da b %d %d; \ mknod %s%dc b %d %d; \ mknod r%s%da c %d %d; \ mknod r%s%dc c %d %d; \ chgrp operator %s%d* r%s%d*;", name, i, name, i, name, i, b, (i * 8), name, i, b, (i * 8) + 2, name, i, c, (i * 8), name, i, c, (i * 8) + 2, name, i, name, i); }}'` else echo "$i is invalid -- can't have more than 32 cd devices" fi umask 77 ;; matcd*) umask 2 case $i in matcd*) unit=`expr $i : '.....\(.*\)'`; name=matcd; blk=17; chr=46;; esac case $unit in 0|1|2|3|4|5|6|7|8|9|10|11|12|13|14|15) mknod ${name}${unit}a b $blk `expr $unit '*' 8 + 0` mknod ${name}${unit}c b $blk `expr $unit '*' 8 + 2` mknod r${name}${unit}a c $chr `expr $unit '*' 8 + 0` mknod r${name}${unit}c c $chr `expr $unit '*' 8 + 2` chgrp operator ${name}${unit}[a-h] r${name}${unit}[a-h] chmod 640 ${name}${unit}[a-h] r${name}${unit}[a-h] mknod ${name}${unit}la b $blk `expr $unit '*' 8 + 128` mknod ${name}${unit}lc b $blk `expr $unit '*' 8 + 130` mknod r${name}${unit}la c $chr `expr $unit '*' 8 + 128` mknod r${name}${unit}lc c $chr `expr $unit '*' 8 + 130` chgrp operator ${name}${unit}l[a-h] r${name}${unit}l[a-h] chmod 640 ${name}${unit}l[a-h] r${name}${unit}l[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; acd?|wcd?) umask 2 ; unit=`expr $i : '...\(.*\)'` blk=19 chr=69 case $unit in 0|1|2|3|4|5|6|7) mknod acd${unit}a b $blk `expr $unit '*' 8 + 0` ln -fs acd${unit}a wcd${unit}a mknod racd${unit}a c $chr `expr $unit '*' 8 + 0` ln -fs racd${unit}a rwcd${unit}a mknod acd${unit}c b $blk `expr $unit '*' 8 + 2` ln -fs acd${unit}c wcd${unit}c mknod racd${unit}c c $chr `expr $unit '*' 8 + 2` ln -fs racd${unit}c rwcd${unit}c chgrp operator acd${unit}[a-h] racd${unit}[a-h] chmod 640 acd${unit}[a-h] racd${unit}[a-h] ;; *) echo bad unit for disk in: $i ;; esac umask 77 ;; wst*) umask 2 ; unit=`expr $i : '...\(.*\)'` chr=90 case $unit in 0|1|2|3) mknod rwst${unit} c $chr `expr $unit '*' 8 + 0` chgrp operator rwst${unit} chmod 640 rwst${unit} ;; esac umask 77 ;; iic*) unit=`expr $i : 'iic\(.*\)'` mknod iic$unit c 105 $unit ;; smb*) unit=`expr $i : 'smb\(.*\)'` mknod smb$unit c 106 $unit ;; ppi*) unit=`expr $i : 'ppi\(.*\)'` mknod ppi$unit c 82 $unit ;; pps*) unit=`expr $i : 'pps\(.*\)'` mknod pps$unit c 89 $unit ;; usb*) unit=`expr $i : 'usb\(.*\)'` mknod usb$unit c 108 $unit ;; ums*) unit=`expr $i : 'ums\(.*\)'` mknod ums$unit c 111 $unit ;; ulpt*) unit=`expr $i : 'ulpt\(.*\)'` mknod ulpt$unit c 113 $unit ;; ugen*) unit=`expr $i : 'ugen\(.*\)'` mknod ugen$unit c 114 $unit ;; lpt*) unit=`expr $i : 'lpt\(.*\)'` mknod lpt$unit c 16 $unit mknod lpctl$unit c 16 `expr $unit + 128` ;; tw*) unit=`expr $i : 'tw\(.*\)'` mknod tw$unit c 19 $unit chgrp operator tw$unit ;; # Use this to create virtual consoles for syscons, pcvt or codrv # ttyv0-b # use as MAKEDEV vtyNN to create NN entries vty*) chr=12 units=`expr $i : 'vty\(.*\)'` eval `echo ${chr} ${units} | awk ' { c=0+$1; n=0+$2 } END { for (i = 0; i < n; i++) printf("mknod ttyv%01x c %d %d;", i, c, i); }'` ln -fs ttyv0 vga # XXX X still needs this pccons relic ;; bpf*) nbpf=`expr $i : 'bpf\(.*\)$'` unit=0 while [ $unit -le $nbpf ]; do mknod bpf$unit c 23 $unit unit=`expr $unit + 1` done ;; speaker) mknod speaker c 26 0 ;; cuaa?|cua?) umask 7 unit=`expr $i : 'cua.*\(.\)$'` m=`ttyminor $unit` mknod cuaa$unit c 28 `expr $m + 128` mknod cuaia$unit c 28 `expr $m + 32 + 128` mknod cuala$unit c 28 `expr $m + 64 + 128` chown uucp:dialer cua*a$unit umask 77 ;; tty0?|ttyd?|tty?) unit=`expr $i : 'tty.*\(.\)$'` m=`ttyminor $unit` mknod ttyd$unit c 28 $m mknod ttyid$unit c 28 `expr $m + 32` mknod ttyld$unit c 28 `expr $m + 64` ;; cuac?) umask 7 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v" major=48 card=`expr $i : 'cua.*\(.\)$'` for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor` name=$card$unit mknod cuac$name c $major `expr $minor + 128` mknod cuaic$name c $major `expr $minor + 32 + 128` mknod cualc$name c $major `expr $minor + 64 + 128` chown uucp:dialer cuac$name cuaic$name cualc$name done umask 77 ;; ttyc?) portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p q r s t u v" major=48 card=`expr $i : 'tty.*\(.\)$'` for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor` name=$card$unit mknod ttyc$name c $major $minor mknod ttyic$name c $major `expr $minor + 32` mknod ttylc$name c $major `expr $minor + 64` done ;; # RISCom8 'rc' driver entries cuam?) umask 7 unit=`expr $i : 'cua.*\(.\)$'` m=`ttyminor $unit` mknod cuam$unit c 63 `expr $m + 128` chown uucp:dialer cuam$unit umask 77 ;; ttym?) unit=`expr $i : 'tty.*\(.\)$'` m=`ttyminor $unit` mknod ttym$unit c 63 $m ;; # Specialix SI/XIO. # Note: these are 'base 1' to match the numbers on the panels, and to match # the manual that comes with the system. ttyA*) major=68 nports=`expr $i : 'ttyA\(.*\)$'` port=1 while [ $port -le $nports ]; do minor=`expr $port - 1` name=`expr $port + 1000 | cut -c 3-4` mknod ttyA$name c $major $minor mknod ttyiA$name c $major `expr $minor + 65536` mknod ttylA$name c $major `expr $minor + 131072` port=`expr $port + 1` done # For the user-mode control program, 'sicontrol' mknod si_control c 68 262144 ;; cuaA*) umask 7 major=68 nports=`expr $i : 'cuaA\(.*\)$'` port=1 while [ $port -le $nports ]; do minor=`expr $port - 1` name=`expr $port + 1000 | cut -c 3-4` mknod cuaA$name c $major `expr $minor + 128` mknod cuaiA$name c $major `expr $minor + 128 + 65536` mknod cualA$name c $major `expr $minor + 128 + 131072` chown uucp:dialer cuaA$name cuaiA$name cualA$name port=`expr $port + 1` done umask 77 ;; # Digiboard PC/?? 16 port card. # The current scheme of minor numbering is: # # unused{14} CARD{2} major{8} CALLOUT{1} LOCK{1} INIT{1} PORT{5} # # CARD bitfield in future versions may be extended to 3 bits. # # See dgb(4) # ttyD?) portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" major=58 card=`expr $i : 'tty.*\(.\)$'` for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor` name=$card$unit mknod ttyD$name c $major $minor mknod ttyiD$name c $major `expr $minor + 32` mknod ttylD$name c $major `expr $minor + 64` done ;; cuaD?) umask 7 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" major=58 card=`expr $i : 'cua.*\(.\)$'` for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor` name=$card$unit mknod cuaD$name c $major `expr $minor + 128` mknod cuaiD$name c $major `expr $minor + 32 + 128` mknod cualD$name c $major `expr $minor + 64 + 128` chown uucp:dialer cua*D$name done umask 77 ;; ttyM*) portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" modulelist="a b c d" major=101 card=`expr $i : 'tty.*\(.\)$'` for unit in $modulelist do moduleminor=`ttyminor $unit` moduleminor=`expr $moduleminor % 10 \* 16` modulename=$unit for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor + $moduleminor` name=$card$modulename$unit rm -f tty*M$name mknod ttyM$name c $major $minor mknod ttyiM$name c $major `expr $minor + 64` mknod ttylM$name c $major `expr $minor + 128` chown root:wheel tty*M$name done done ;; cuaM?) umask 7 portlist="0 1 2 3 4 5 6 7 8 9 a b c d e f" modulelist="a b c d" major=101 card=`expr $i : 'cua.*\(.\)$'` for unit in $modulelist do moduleminor=`ttyminor $unit` moduleminor=`expr $moduleminor % 10 \* 16` modulename=$unit for unit in $portlist do minor=`ttyminor $unit` minor=`expr $card \* 65536 + $minor + $moduleminor` name=$card$modulename$unit rm -f cua*M$name mknod cuaM$name c $major `expr $minor + 262144` mknod cuaiM$name c $major `expr $minor + 64 + 262144` mknod cualM$name c $major `expr $minor + 128 + 262144` chown uucp:dialer cua*M$name done done umask 77 ;; ttyR?) major=81 BOARD=1; MINOR=65536; Rnum=0 MINOR=`expr $BOARD \* 65536` dmesg | grep ^RocketPort[0-4] > /tmp/rp_list controllers=`awk '{print $1}' < /tmp/rp_list` rm -f /dev/ttyR*; rm -f /dev/ttyiR*; rm -f /dev/ttylR* for i in $controllers;do ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'` echo -n "Creating $ndevices devices for $i: " for dev in `jot $ndevices 0`;do mknod /dev/ttyR$Rnum c $major $MINOR mknod /dev/ttylR$Rnum c $major `expr $MINOR + 32` mknod /dev/ttyiR$Rnum c $major `expr $MINOR + 64` Rnum=`expr $Rnum + 1` MINOR=`expr $MINOR + 1` done BOARD=`expr $BOARD + 1` MINOR=`expr $BOARD \* 65536` echo " " done ;; cuaR?) major=81 BOARD=1; MINOR=65536; Rnum=0 MINOR=`expr $BOARD \* 65536` dmesg | grep ^RocketPort[0-4] > /tmp/rp_list controllers=`awk '{print $1}' < /tmp/rp_list` rm -f /dev/cuaR*; rm -f /dev/cuaiR*; rm -f /dev/cualR* for i in $controllers;do ndevices=`grep ^$i /tmp/rp_list | sed -e 's/.* \([0-9]*\) ports/\1/'` echo -n "Creating $ndevices devices for $i: " for dev in `jot $ndevices 0`;do mknod /dev/cuaR$Rnum c $major `expr $MINOR + 128` mknod /dev/cualR$Rnum c $major `expr $MINOR + 128 + 32` mknod /dev/cuaiR$Rnum c $major `expr $MINOR + 128 + 64` Rnum=`expr $Rnum + 1` MINOR=`expr $MINOR + 1` done BOARD=`expr $BOARD + 1` MINOR=`expr $BOARD \* 65536` echo " " done chown uucp:dialer /dev/cuaR* ;; mse*) unit=`expr $i : 'mse\(.*\)'` chr=27 mknod mse$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11 ;; psm*) unit=`expr $i : 'psm\(.*\)'` chr=21 mknod psm$unit c $chr `expr $unit '*' 2 + 1` # non-blocking for X11 ;; mouse*) name=`expr $i : 'mouse\(.*\)'` if [ ! -c $name ]; then $0 $name # make the appropriate device fi ln -fs $name mouse ;; pcaudio) mknod pcaudio c 24 0 mknod pcaudioctl c 24 128 ;; socksys) mknod socksys c 41 0 mknod spx c 41 1 ln -fs socksys nfsd chmod 666 socksys nfsd spx ;; snd*) # # changes from Linux voxware # minor Linux FreeBSD # 8 sequencer2 (aka music0) music0 # 17 patmgr0 sequencer1 # 33 patmgr1 sequencer2 # unit=`expr $i : 'snd\(.*\)'` chr=30 # XXX write this less verbosely, like std snd_security_hole=0 # XXX umask $snd_security_hole ln -fs mixer$unit mixer ln -fs sequencer$unit sequencer ln -fs dsp$unit dsp ln -fs audio$unit audio ln -fs dspW$unit dspW ln -fs music$unit music ln -fs pss$unit pss mknod mixer$unit c $chr `expr $unit '*' 16 + 0` mknod sequencer$unit c $chr `expr $unit '*' 16 + 1` mknod midi$unit c $chr `expr $unit '*' 16 + 2` mknod dsp$unit c $chr `expr $unit '*' 16 + 3` mknod audio$unit c $chr `expr $unit '*' 16 + 4` mknod dspW$unit c $chr `expr $unit '*' 16 + 5` mknod sndstat c $chr 6 # minor number 7 is unused mknod music$unit c $chr `expr $unit '*' 16 + 8` mknod pss$unit c $chr `expr $unit '*' 16 + 9` # minor numbers 10-15 are unused umask 77 ;; vat) mknod vatio c 25 128 chmod 660 vatio ;; gsc*) unit=`expr $i : 'gsc\(.*\)'` mknod gsc${unit} c 47 $unit mknod gsc${unit}p c 47 $(($unit + 8)) mknod gsc${unit}d c 47 $(($unit + 32)) mknod gsc${unit}pd c 47 $(($unit + 40)) chmod 666 gsc${unit}* ;; apm*) chr=39 mknod apm c $chr 0 mknod apmctl c $chr 8 chgrp operator apm chgrp operator apmctl chmod 660 apm chmod 660 apmctl ;; card*) unit=`expr $i : 'card\(.*\)'` chr=50 mknod card$unit c $chr $unit chmod 644 card$unit ;; ttyx?|ttyy?|ttyz?) case $i in *0) unit=0;; *1) unit=1;; *2) unit=2;; *3) unit=3;; *4) unit=4;; *5) unit=5;; *6) unit=6;; *7) unit=7;; *8) unit=8;; *9) unit=9;; *a) unit=10;; *b) unit=11;; *c) unit=12;; *d) unit=13;; *e) unit=14;; *f) unit=15;; esac case $i in ttyy?) unit=`expr $unit \+ 16`;; ttyz?) unit=`expr $unit \+ 32`;; esac mknod $i c 42 $unit chown uucp:wheel $i ;; cronyx) mknod cronyx c 42 63 ;; joy) mknod joy0 c 51 0 mknod joy1 c 51 1 chgrp operator joy0 joy1 chmod 640 joy0 joy1 ;; spigot) mknod spigot c 11 0 chmod 444 spigot ;; ctx?) unit=`expr $i : 'ctx\(.*\)'` mknod ctx$unit c 40 $unit chmod 444 ctx$unit ;; meteor?) unit=`expr $i : 'meteor\(.*\)'` mknod meteor$unit c 67 $unit chmod 444 meteor$unit ;; bktr?) unit=`expr $i : 'bktr\(.*\)'` mknod bktr$unit c 92 $unit mknod tuner$unit c 92 $((16 + $unit )) mknod vbi$unit c 92 $((32 + $unit )) chmod 444 bktr$unit tuner$unit vbi$unit ;; tun*) ntun=`expr $i : 'tun\(.*\)$'` unit=0 while [ $unit -le $ntun ]; do mknod tun$unit c 52 $unit chown uucp:dialer tun$unit unit=`expr $unit + 1` done ;; sysmouse) mknod sysmouse c 12 128 mknod consolectl c 12 255 ;; snp?) unit=`expr $i : 'snp\(.*\)'` mknod snp$unit c 53 $unit ;; # dufault@hda.com: If I do much more work on other A-D boards # then eventually we'll have a "ad" and "dio" interface and some of these # "labpcaio" ones will be gone. # labpcaio: D-A and A-D. # labpcdio: Digital in and Digital out. # labpc*) umask 7 case $i in labpcaio*) name=labpcaio unit=`expr $i : 'labpcaio\(.*\)'` all="0 1 2 3 4 5 6 7" offset=0 ;; labpcdio*) name=labpcdio unit=`expr $i : 'labpcdio\(.*\)'` all="0 1 2 3" offset=8 ;; *) die 3 "Don't know LabPC type $i" ;; esac if [ "X${unit}" = "X" ]; then unit=all fi case $unit in 0|1|2|3|4|5|6|7) mknod $name$unit c 66 `expr $offset + $unit ` ;; all) for i in $all do mknod $name$i c 66 `expr $offset + $i ` done ;; *) echo "No such LabPC unit: $unit" ;; esac umask 77 ;; perfmon) mknod perfmon c 2 32 chgrp kmem perfmon chmod 640 perfmon ;; ipl) mknod ipl c 79 0 mknod ipnat c 79 1 mknod ipstate c 79 2 mknod ipauth c 79 3 ;; kbd*) unit=`expr $i : 'kbd\(.*\)'` chr=112 mknod kbd$unit c $chr $unit ;; i4b) mknod i4b c 60 0 chown root:wheel i4b chmod 600 i4b ;; i4bctl) mknod i4bctl c 55 0 chown root:wheel i4bctl chmod 600 i4bctl ;; i4brbch*) unit=`expr $i : 'i4brbch\(.*\)'` mknod i4brbch$unit c 57 $unit chown root:wheel i4brbch$unit chmod 600 i4brbch$unit ;; i4bteld*) offset=64 unit=`expr $i : 'i4bteld\(.*\)'` mknod i4bteld$unit c 56 `expr $offset + $unit ` chown root:wheel i4bteld$unit chmod 600 i4bteld$unit ;; i4btel*) unit=`expr $i : 'i4btel\(.*\)'` mknod i4btel$unit c 56 $unit chown root:wheel i4btel$unit chmod 600 i4btel$unit ;; i4btrc*) unit=`expr $i : 'i4btrc\(.*\)'` mknod i4btrc$unit c 59 $unit chown root:wheel i4btrc$unit chmod 600 i4btrc$unit ;; local) umask 0 # XXX should be elsewhere sh MAKEDEV.local umask 77 ;; *) echo $i - no such device name ;; esac done --SUOF0GtieIMvvwua-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000316211239.C64407>