Date: Wed, 19 Apr 2000 02:44:18 -0600 From: Warner Losh <imp@village.org> To: mobile@freebsd.org Subject: We're reading CIS! Message-ID: <200004190844.CAA99540@harmony.village.org>
next in thread | raw e-mail | index | archive | help
OK. Looks like the newcard stuff is reading CIS. Yippie skippie!
NEWCARD, a heavily modified version of NetBSD's and newconfig's pccard
system, is now mapping and reading the CIS. Now, to write the child
attachment code and to convert some drivers to use this and to shake
out that stuff. Also, need to consider the proper way to deal with
the running of scripts on card events currently done by pccardd, as
well as a way to get pccardc dumpcis and other functions into the new
system.
Here's the edited dmesg from my last test run before the commit,
followed by a pccardc dumpcis to show that things appear to be
working:
pcic0: intr
pccard0: 00 CD 7f
pccard0: enqueing INSERTION event
pccard0: insertion event
pcic_attach_card h 0xc0aa2844 h->dev 0xc0aa1a80 pccard pcic
pccard0: pccard_card_attach
pccard0: chip_socket_enable
pccard0: pcic_chip_socket_enable cardtype mem 40
pccard0: read_cis
Calling scan_cis
pcic_chip_mem_map window 0 bus 0+0+400 at card addr 0
pcic_chip_do_mem_map window 0: 0000 8000 0000
0xc0a9aa80 0xc0aa1a80 3 0 0x1
pcic_chip_do_mem_map window 0: 00d2 80d2 4000
cis mem map c00d2000
pccard0: CIS tuple chain:
CISTPL_DEVICE type=null speed=null
01 03 00 00 ff
CISTPL_FUNCID
21 02 06 00
CISTPL_VERS_1
15 47 04 01 4d 65 67 61 68 65 72 74 7a 00 43 43
31 30 42 54 2f 32 00 50 43 4d 43 49 41 20 31 30
42 41 53 45 2d 54 2f 32 20 45 54 48 45 52 4e 45
54 20 41 44 41 50 54 45 52 00 30 30 30 30 38 36
31 30 32 42 43 30 00 00 ff
CISTPL_CONFIG
1a 05 01 01 00 03 01
CISTPL_CFTABLE_ENTRY
1b 0c c1 01 19 71 55 06 0e 2d 64 30 ff ff
CISTPL_CFTABLE_ENTRY
1b 05 83 01 08 65 ff
CISTPL_MANFID
20 04 28 01 03 01
CISTPL_NO_LINK
14 00
CISTPL_END
ff
pccard0: chip_socket_disable
pcic_chip_socket_disable
pccard0: check_cis_quirks
pccard0: functions scanning
######## should have attached cards here. :-(
pcic0: intr
pccard0: 00 CD 37
pccard0: detaching card
pccard0: enqueing REMOVAL event
pcic0: intr
pccard0: 00 CD 33
pccard0: removal event
pcic_detach_card: already detached
Notice that the above compares well to the dumpcis for the card, shown
below:
Configuration data for card in slot 0
Tuple #1, code = 0x1 (Common memory descriptor), length = 3
000: 00 00 ff
Common memory device information:
Device number 1, type No device, WPS = OFF
Speed = No speed, Memory block size = 512b, 1 units
Tuple #2, code = 0x21 (Functional ID), length = 2
000: 06 00
Network/LAN adapter
Tuple #3, code = 0x15 (Version 1 info), length = 71
000: 04 01 4d 65 67 61 68 65 72 74 7a 00 43 43 31 30
010: 42 54 2f 32 00 50 43 4d 43 49 41 20 31 30 42 41
020: 53 45 2d 54 2f 32 20 45 54 48 45 52 4e 45 54 20
030: 41 44 41 50 54 45 52 00 30 30 30 30 38 36 31 30
040: 32 42 43 30 00 00 ff
Version = 4.1, Manuf = [Megahertz],card vers = [CC10BT/2]
Addit. info = [PCMCIA 10BASE-T/2 ETHERNET ADAPTER],[000086102BC0],[]
Tuple #4, code = 0x1a (Configuration map), length = 5
000: 01 01 00 03 01
Reg len = 2, config register addr = 0x300, last config = 0x1
Registers: X-------
Tuple #5, code = 0x1b (Configuration entry), length = 12
000: c1 01 19 71 55 06 0e 2d 64 30 ff ff
Config index = 0x1(default)
Interface byte = 0x1 (I/O)
Vcc pwr:
Nominal operating supply voltage: 5 x 1V
Max current average over 1 second: 1 x 100mA
Max current average over 10 ms: 1.2 x 100mA
Power down supply current: 2.5 x 10mA
Card decodes 4 address lines, full 8/16 Bit I/O
IRQ modes: Level, Pulse
IRQ level = 4
Tuple #6, code = 0x1b (Configuration entry), length = 5
000: 83 01 08 65 ff
Config index = 0x3
Interface byte = 0x1 (I/O)
Card decodes 5 address lines, full 8/16 Bit I/O
Tuple #7, code = 0x20 (Manufacturer ID), length = 4
000: 28 01 03 01
PCMCIA ID = 0x128, OEM ID = 0x103
Tuple #8, code = 0x14 (No link), length = 0
Tuple #9, code = 0xff (Terminator), length = 0
1 slots found
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200004190844.CAA99540>