Date: Thu, 18 May 2000 08:23:17 -0600 From: Steve Passe <smp@csn.net> To: "Randall D. DuCharme" <randyd@tcainternet.com> Cc: smp@FreeBSD.ORG Subject: Re: FreeBSD 4.0-Release and P6DNF Message-ID: <200005181423.IAA79672@Ilsa.StevesCafe.com> In-Reply-To: Your message of "Wed, 17 May 2000 20:48:10 CDT." <39234BD9.3393D947@tcainternet.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi,
===============================================================================
>
> MPTable, version 2.0.15
>
...
> --
> Bus: Bus ID Type
> 0 PCI
> 1 ISA
> --
> I/O APICs: APIC ID Version State Address
> 2 0x11 usable 0xfec00000
> --
> I/O Ints: Type Polarity Trigger Bus ID IRQ APIC ID PIN#
> ExtINT conforms conforms 1 0 2 0
> INT conforms conforms 1 1 2 1
> INT conforms conforms 1 0 2 2
> INT conforms conforms 1 3 2 3
> INT conforms conforms 1 4 2 4
> INT conforms conforms 1 5 2 5
> INT conforms conforms 1 6 2 6
> INT conforms conforms 1 7 2 7
> INT conforms conforms 1 8 2 8
> INT conforms conforms 1 10 2 10
> INT conforms conforms 1 12 2 12
> INT conforms conforms 1 13 2 13
> INT conforms conforms 1 15 2 20
> INT active-lo level 1 11 2 16
> INT active-lo level 1 11 2 17
> INT active-lo level 1 14 2 18
> INT active-lo level 1 9 2 19
^ ^^
This BIOS is definitaly wrong. It shows your PCI slots as being on the
ISA bus. The INTs themselves show up in 'ISA' notation as oppossed to
'PCI' notation, but that is probably because mptable believes them to be
ISA (as will the kernel!). Another user reports the same warning, but
no PANIC, I suspect that is an issue of what cards are in which PCI slot...
Play with different PCI slot positions, try to load a newer BIOS.
--
Steve Passe | powered by
smp@csn.net | Symmetric MultiProcessor FreeBSD
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-smp" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200005181423.IAA79672>