Date: Thu, 13 Jul 2000 11:05:48 -0600 (MDT) From: Steve Jorgensen <steve@khoral.com> To: freebsd-mobile@freebsd.org Subject: Dell Inspiron 7500 sound configuration Message-ID: <200007131705.LAA20275@zen.alb.khoral.com>
next in thread | raw e-mail | index | archive | help
--%--multipart-mixed-boundary-1.20076.963507948--% Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit I'm trying to get sound working on my Dell Inspiron 7500 notebook under FreeBSD 4.0-STABLE as of July 11. It has the ESS Technology Maestro 2E Audio controlloer in it. After a search of the archives, it looks like it isn't supported under 4.0, however, the latest artical I found talking about it was Feb 2000. So, I'm hoping that progress has been made since then. :) Anyway, I've defined device pcm0 device sbc0 in my Kernel config, and I've attached the output of a dmesg. Is it possible to get audio working? If so how? Thanks for any help. Steve -- ----------------------------------------------------------- Steven Jorgensen steve@khoral.com steve@spukhaus.com ------------------------------+---------------------------- Khoral Research Inc. | PHONE: (505) 837-6500 6200 Uptown Blvd, Suite 200 | FAX: (505) 881-3842 Albuquerque, NM 87110 | URL: http://www.khoral.com/ ----------------------------------------------------------- --%--multipart-mixed-boundary-1.20076.963507948--% Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Content-Description: ascii text Content-Disposition: attachment; filename="out" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.0-20000711-STABLE #0: Thu Jul 13 09:06:07 MDT 2000 root@chucky.local.spukhaus.com:/usr/src/sys/compile/CHUCKY Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (651.48-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 201261056 (196544K bytes) avail memory = 191901696 (187404K bytes) Preloaded elf kernel "kernel" at 0xc037f000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <ATI Mobility-1 graphics accelerator> at 0.0 irq 11 pcic-pci0: <TI PCI-1225 PCI-CardBus Bridge> at device 4.0 on pci0 pcic-pci0: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] pcic-pci1: <TI PCI-1225 PCI-CardBus Bridge> at device 4.1 on pci0 pcic-pci1: TI12XX PCI Config Reg: [ring enable][speaker enable][pwr save][FUNC pci int + CSC serial isa irq] isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0x1050-0x105f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0x1060-0x107f irq 5 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhub0: port 1 power on failed, IOERROR uhub0: port 2 power on failed, IOERROR chip1: <Intel 82371AB Power management controller> port 0x1040-0x104f at device 7.3 on pci0 chip2: <ESS Technology Maestro 2E Audio controller> port 0x1400-0x14ff irq 5 at device 8.0 on pci0 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0x1080-0x10bf mem 0xfc000000-0xfc0fffff,0xfc100000-0xfc100fff irq 11 at device 13.0 on pci0 fxp0: Ethernet address 00:20:e0:62:17:26 fxp0: supplying EUI64: 00:20:e0:ff:fe:62:17:26 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model MouseMan+, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <VLSI 82C146> at port 0x3e0 iomem 0xd0000 irq 10 on isa0 pcic0: management irq 10 pccard0: <PC Card bus -- kludge version> on pcic0 pccard1: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/7 bytes threshold ppi0: <Parallel I/O> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 ata1-slave: ata_command: timeout waiting for intr ata1-slave: identify failed ad0: 28615MB <IBM-DJSA-230> [58140/16/63] at ata0-master using UDMA33 acd0: DVD-ROM <TOSHIBA DVD-ROM SD-C2402> at ata1-master using PIO4 Mounting root from ufs:/dev/ad0s2a --%--multipart-mixed-boundary-1.20076.963507948--%-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?200007131705.LAA20275>