Date: Thu, 3 Aug 2000 19:15:38 +0200 From: Andreas Klemm <andreas@klemm.gtn.com> To: Soren Schmidt <sos@freebsd.dk> Cc: Andreas Klemm <andreas@klemm.gtn.com>, j mckitrick <jcm@FreeBSD-uk.eu.org>, freebsd-current@FreeBSD.ORG Subject: Re: ATA66 support Message-ID: <20000803191538.A8387@titan.klemm.gtn.com> In-Reply-To: <200008031656.SAA60523@freebsd.dk>; from sos@freebsd.dk on Thu, Aug 03, 2000 at 06:56:55PM %2B0200 References: <20000803183721.A6597@titan.klemm.gtn.com> <200008031656.SAA60523@freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
On Thu, Aug 03, 2000 at 06:56:55PM +0200, Soren Schmidt wrote:
> It seems Andreas Klemm wrote:
> > On Wed, Aug 02, 2000 at 07:29:30PM +0200, Soren Schmidt wrote:
> > I can confirm, that for example the Tyan Titan Pro has chipsets
> > builtin that doesn't grok ATA66.
>
> Ehm, you mean because the HW design on the board is broken, or
> because the chip hasn't ATA66 support ?
Because of the "chipset" ... "BX and such" which is needed for
the flavour of CPU you use... Don't ask me on chipsets, can't
remember the names ...
> > I met somebody who programmed BIOSes and such ...
> We dont use the BIOS for ATA DMA....
> What do you mean with the above statement ?
Excuse me ... chipsets I mean not BIOS.
> > So now I know, why even buying a separate ATA PCI controller didn't
> > work ... so in this case its not the harddisk ...
>
> ????
I bought a separate ATA PCI controller which is capable of ATA 66.
But using an ATA-66 capable cable causes the system to hang during
boot.
atapci0: <Intel PIIX3 ATA controller> at device 7.1 on pci0
atapci0: Busmastering DMA not enabled
atapci1: <HighPoint HPT366 ATA66 controller> port 0xac00-0xacff,0xa800-0xa803,0xa400-0xa407 irq 15 at device 14.0 on pci0
ata2: at 0xa400 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0xb800-0xb8ff,0xb400-0xb403,0xb000-0xb007 irq 15 at device 14.1 on pci0
> The motherboard has to be severely broken if a PCI controller wont work...
> What HW are we talking about here ?
Tyan Titan Pro, SMP board, 2 x 200 PPro
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #0: Fri Jul 28 08:09:24 CEST 2000
root@titan.klemm.gtn.com:/usr/src/sys/compile/TITAN
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium Pro (199.43-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x619 Stepping = 9
Features=0xfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV>
real memory = 159383552 (155648K bytes)
avail memory = 150999040 (147460K bytes)
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
IOAPIC #0 intpin 16 -> irq 15
IOAPIC #0 intpin 17 -> irq 11
IOAPIC #0 intpin 18 -> irq 10
IOAPIC #0 intpin 19 -> irq 14
FreeBSD/SMP: Multiprocessor motherboard
cpu0 (BSP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 2, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc038f000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc038f09c.
VESA: v2.0, 4096k memory, flags:0x1, mode table:0xc03289c2 (1000022)
VESA: Matrox Graphics Inc.
Pentium Pro MTRR support enabled
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
isab0: <Intel 82371SB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX3 ATA controller> at device 7.1 on pci0
atapci0: Busmastering DMA not enabled
pci0: <Matrox MGA Millennium 2064W graphics accelerator> at 10.0
xl0: <3Com 3c900-COMBO Etherlink XL> port 0x9400-0x943f irq 14 at device 11.0 on pci0
xl0: Ethernet address: 00:60:97:aa:3a:db
xl0: selecting 10baseT transceiver, half duplex
pcm0: <Creative EMU10K1> port 0x9800-0x981f irq 10 at device 12.0 on pci0
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xa000-0xa0ff mem 0xe2000000-0xe2000fff irq 11 at device 13.0 on pci0
ahc0: aic7880 Single Channel A, SCSI Id=7, 16/255 SCBs
atapci1: <HighPoint HPT366 ATA66 controller> port 0xac00-0xacff,0xa800-0xa803,0xa400-0xa407 irq 15 at device 14.0 on pci0
ata2: at 0xa400 on atapci1
atapci2: <HighPoint HPT366 ATA66 controller> port 0xb800-0xb8ff,0xb400-0xb403,0xb000-0xb007 irq 15 at device 14.1 on pci0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <4 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/15 bytes threshold
ppbus0: IEEE1284 device found /NIBBLE/ECP
Probing for PnP devices on ppbus0:
ppbus0: <HEWLETT-PACKARD DESKJET 970C> MLC,PCL,PML
ppi0: <Parallel I/O> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ed0 at port 0x280-0x29f iomem 0xd8000-0xdbfff irq 5 on isa0
ed0: address 00:00:c0:5a:98:2a, type WD8013EPC (16 bit)
ahc0: Someone reset channel A
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 100 packets/entry by default
DUMMYNET initialized (000608)
IPv6 packet filtering initialized, logging limited to 100 packets/entry
SMP: AP CPU #1 Launched!
ad4: 39082MB <Maxtor 54098U8> [79406/16/63] at ata2-master using UDMA33
Waiting 8 seconds for SCSI devices to settle
sa0 at ahc0 bus 0 target 4 lun 0
sa0: <TANDBERG TDC 4222 =07:> Removable Sequential Access SCSI-2 device
sa0: 4.807MB/s transfers (4.807MHz, offset 8)
Mounting root from ufs:/dev/ad4s2a
cd0 at ahc0 bus 0 target 5 lun 0
cd0: <TOSHIBA CD-ROM XM-5701TA 3136> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 8)
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ahc0 bus 0 target 6 lun 0
cd1: <TEAC CD-R55S 1.0K> Removable CD-ROM SCSI-2 device
cd1: 10.000MB/s transfers (10.000MHz, offset 15)
cd1: Attempt to query device size failed: NOT READY, Medium not present
--
Andreas Klemm
Songs from our band........................http://people.freebsd.org/~andreas/
Powered by FreeBSD SMP...............http://www.freebsd.org/~fsmp/SMP/SMP.html
Please note: Apsfilter got a NEW HOME................http://www.apsfilter.org/
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-current" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000803191538.A8387>