Date: Thu, 24 Aug 2000 17:55:37 -0500 From: "Michael C. Wu" <keichii@peorth.iteration.net> To: freebsd-mobile@freebsd.org, cg@freebsd.org Subject: VAIO Z505JS Reports and Questions Message-ID: <20000824175536.D1353@peorth.iteration.net>
next in thread | raw e-mail | index | archive | help
--h31gzZEtNLTqOjlF Content-Type: text/plain; charset=us-ascii Content-Disposition: inline Hi all, I recently purchased a Sony VAIO Z505JS along with the DVD-ROM that Sony sells to the Z series customers. Running the 20000815-Current snapshot from current.freebsd.org PCM worked right away after compiling it in. Perfectly well playing mp3's and .wavs. XFree86 3.3.6 and 4.0.1 did not detect/support the NeoMagicXL+ (aka NeoMagic 2380). Thanks to Ollivier's pointer, I put : Chipset "NM2200" And now X-TT+XFree863.3.6 runs happily. The onboard fxp0 detected and runs very well. (sustained at 8.7 megabytes/sec on 100mbit full-dup switched ether) Mouse works well. The sony memory stick drive detected as umass0 and is seen by the system as da0. USB works well. Here are a few troubling spots: APM detected and apmd runs. When I try to suspend (either with Fn+Esc, Fn+F12, zzz, apm -z, apm =Z) it suspends to memory and comes back fine. Problem is, upon coming back up, kernel keeps flushing out "uhub0: halted" "pcm0: halted" "fxp0 timed out" Sound will not play, cannot ping out, usb devices don't respond. How should I get apm and suspend-to-disk working? I cannot find out if the DVDROM is cardbus or not. Upon boot, if the DVDROM is plugged into the PCMCIA slot kernel will panic. Has anyone gotten it to even detect correctly? Finally, is the jogdial usable? I appreciate any feedback and suggestions. Thanks. Attached are relevant files. --Michael -- +------------------------------------------------------------------+ | keichii@peorth.iteration.net | keichii@bsdconspiracy.net | | http://peorth.iteration.net/~keichii | Yes, BSD is a conspiracy. | +------------------------------------------------------------------+ --h31gzZEtNLTqOjlF Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.txt" Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-20000815-CURRENT #0: Wed Aug 23 01:04:19 CDT 2000 keichii@iterative.iteration.net:/usr/src/sys/compile/ITERATIVE Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 496311082 Hz CPU: Pentium III/Pentium III Xeon/Celeron (496.31-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 134152192 (131008K bytes) avail memory = 124919808 (121992K bytes) Preloaded elf kernel "kernel" at 0xc0461000. Preloaded elf module "vesa.ko" at 0xc046109c. seq0-63: Midi sequencers. Pentium Pro MTRR support enabled VESA: v2.0, 6080k memory, flags:0x0, mode table:0xc045e2c2 (1000022) VESA: MagicMedia 256XL+ 48K md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel 82443BX (440 BX) host to PCI bridge> at 0.0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NeoMagic model 0016 VGA-compatible display device> at 0.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <Intel 82371AB Power management controller> at 7.3 pci0: <unknown card> (vendor=0x104d, dev=0x8039) at 8.0 irq 9 pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0 pci0: <unknown card> (vendor=0x14f1, dev=0x2443) at 10.0 irq 9 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem 0xfec00000-0xfecfffff,0xfedf6000-0xfedf6fff irq 9 at device 11.0 on pci0 fxp0: Ethernet address 08:00:46:07:de:51 pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 12.0 on pci0 pci0: <unknown card> (vendor=0x104d, dev=0x808a) at 13.0 irq 0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0303> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0401> can't assign resources DUMMYNET initialized (000608) IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 250 packets/entry by default IPsec: Initialized Security Association Processing. IPv6 packet filtering initialized, logging limited to 250 packets/entry ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master using UDMA33 Mounting root from ufs:/dev/ad0s2a pid 68868 (conftest), uid 0: exited on signal 6 (core dumped) pcm0: hwptr went backwards 824 -> 440 pcm0: hwptr went backwards 136 -> 3632 pcm0: hwptr went backwards 592 -> 4060 pcm0: hwptr went backwards 880 -> 636 pcm0: hwptr went backwards 2172 -> 1276 pcm0: hwptr went backwards 652 -> 4028 pcm0: hwptr went backwards 824 -> 4056 pcm0: hwptr went backwards 652 -> 452 pcm0: hwptr went backwards 1688 -> 1228 pcm0: hwptr went backwards 880 -> 764 pcm0: hwptr went backwards 824 -> 452 pcm0: hwptr went backwards 824 -> 632 pcm0: hwptr went backwards 2396 -> 2372 pcm0: hwptr went backwards 40 -> 3200 pcm0: hwptr went backwards 3016 -> 2096 pcm0: hwptr went backwards 3632 -> 3316 pcm0: hwptr went backwards 2080 -> 1940 pcm0: hwptr went backwards 3448 -> 3364 pcm0: hwptr went backwards 880 -> 208 pcm0: hwptr went backwards 528 -> 328 pcm0: hwptr went backwards 716 -> 3908 pcm0: hwptr went backwards 592 -> 3696 pcm0: hwptr went backwards 1832 -> 1360 pcm0: hwptr went backwards 880 -> 188 pcm0: hwptr went backwards 652 -> 408 pcm0: hwptr went backwards 860 -> 432 pcm0: hwptr went backwards 1780 -> 800 pcm0: hwptr went backwards 652 -> 484 pcm0: hwptr went backwards 980 -> 176 pcm0: hwptr went backwards 824 -> 28 pcm0: hwptr went backwards 912 -> 408 pcm0: hwptr went backwards 236 -> 3440 pcm0: hwptr went backwards 72 -> 3376 pcm0: hwptr went backwards 816 -> 532 pcm0: hwptr went backwards 424 -> 3876 pcm0: hwptr went backwards 880 -> 236 pcm0: hwptr went backwards 880 -> 492 pcm0: hwptr went backwards 708 -> 424 pcm0: hwptr went backwards 820 -> 3920 pcm0: hwptr went backwards 880 -> 3980 pcm0: hwptr went backwards 592 -> 3740 pcm0: hwptr went backwards 652 -> 3896 pcm0: hwptr went backwards 708 -> 656 pcm0: hwptr went backwards 2480 -> 2032 pcm0: hwptr went backwards 824 -> 644 pcm0: hwptr went backwards 2376 -> 1656 pcm0: hwptr went backwards 1172 -> 640 pcm0: hwptr went backwards 2464 -> 2280 pcm0: hwptr went backwards 1068 -> 276 pcm0: hwptr went backwards 1872 -> 1700 pcm0: hwptr went backwards 824 -> 652 pcm0: hwptr went backwards 592 -> 3780 pcm0: hwptr went backwards 1556 -> 1476 pcm0: hwptr went backwards 452 -> 228 pcm0: hwptr went backwards 692 -> 16 pcm0: hwptr went backwards 592 -> 476 pcm0: hwptr went backwards 708 -> 3984 pcm0: hwptr went backwards 1712 -> 1424 pid 51651 (battery_applet), uid 1001: exited on signal 6 (core dumped) pcm0: hwptr went backwards 2436 -> 2364 pcm0: hwptr went backwards 2468 -> 2340 pcm0: hwptr went backwards 652 -> 528 pcm0: hwptr went backwards 2112 -> 1088 pcm0: hwptr went backwards 592 -> 236 pcm0: hwptr went backwards 824 -> 432 pcm0: hwptr went backwards 2200 -> 1752 pcm0: hwptr went backwards 772 -> 4016 pid 52478 (soffice.bin), uid 1001: exited on signal 6 (core dumped) pid 52490 (soffice.bin), uid 1001: exited on signal 6 (core dumped) pcm0: hwptr went backwards 880 -> 4056 pcm0: hwptr went backwards 1784 -> 1700 pcm0: hwptr went backwards 1188 -> 552 pcm0: hwptr went backwards 652 -> 3812 pcm0: play interrupt timeout, channel dead pcm0: play interrupt timeout, channel dead fxp0: device timeout usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted pcm0: play interrupt timeout, channel dead usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted pcm0: play interrupt timeout, channel dead usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted Waiting (max 60 seconds) for system process `bufdaemon' to stop...usb0: host controller halted usb0: host controller halted stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 3 done Uptime: 10h16m21s Rebooting... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-20000815-CURRENT #0: Wed Aug 23 01:04:19 CDT 2000 keichii@iterative.iteration.net:/usr/src/sys/compile/ITERATIVE Timecounter "i8254" frequency 1193182 Hz Timecounter "TSC" frequency 496310672 Hz CPU: Pentium III/Pentium III Xeon/Celeron (496.31-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 134152192 (131008K bytes) avail memory = 124919808 (121992K bytes) Preloaded elf kernel "kernel" at 0xc0461000. Preloaded elf module "vesa.ko" at 0xc046109c. seq0-63: Midi sequencers. Pentium Pro MTRR support enabled VESA: v2.0, 6080k memory, flags:0x0, mode table:0xc045e2c2 (1000022) VESA: MagicMedia 256XL+ 48K md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel 82443BX (440 BX) host to PCI bridge> at 0.0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NeoMagic model 0016 VGA-compatible display device> at 0.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <Intel 82371AB Power management controller> at 7.3 pci0: <unknown card> (vendor=0x104d, dev=0x8039) at 8.0 irq 9 pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0 pci0: <unknown card> (vendor=0x14f1, dev=0x2443) at 10.0 irq 9 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem 0xfec00000-0xfecfffff,0xfedf6000-0xfedf6fff irq 9 at device 11.0 on pci0 fxp0: Ethernet address 08:00:46:07:de:51 pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 12.0 on pci0 pci0: <unknown card> (vendor=0x104d, dev=0x808a) at 13.0 irq 0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0303> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0401> can't assign resources DUMMYNET initialized (000608) IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 250 packets/entry by default IPsec: Initialized Security Association Processing. IPv6 packet filtering initialized, logging limited to 250 packets/entry ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master using UDMA33 Mounting root from ufs:/dev/ad0s2a pcm0: hwptr went backwards 696 -> 4040 pcm0: hwptr went backwards 368 -> 3684 pcm0: hwptr went backwards 592 -> 220 pcm0: hwptr went backwards 188 -> 3288 pcm0: play interrupt timeout, channel dead pcm0: play interrupt timeout, channel dead pcm0: play interrupt timeout, channel dead pcm0: play interrupt timeout, channel dead pid 351 (crxvt), uid 1001: exited on signal 11 (core dumped) fxp0: device timeout usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted usb0: host controller halted Waiting (max 60 seconds) for system process `bufdaemon' to stop...usb0: host controller halted usb0: host controller halted stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... 5 3 1 1 1 1 1 1 1 1 1 1 1 1 1 usb0: host controller halted 1 usb0: host controller halted 1 usb0: host controller halted usb0: host controller halted 1 usb0: host controller halted 1 usb0: host controller halted 1 giving up on 1 buffers Uptime: 39m45s The operating system has halted. Please press any key to reboot. Rebooting... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-20000815-CURRENT #0: Thu Aug 24 16:48:16 CDT 2000 keichii@iterative.iteration.net:/usr/src/sys/compile/ITERATIVE.test Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (496.31-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 134152192 (131008K bytes) avail memory = 124919808 (121992K bytes) Preloaded elf kernel "kernel" at 0xc0461000. Preloaded elf module "vesa.ko" at 0xc046109c. seq0-63: Midi sequencers. Pentium Pro MTRR support enabled VESA: v2.0, 6080k memory, flags:0x0, mode table:0xc045e2c2 (1000022) VESA: MagicMedia 256XL+ 48K md0: Malloc disk apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel 82443BX (440 BX) host to PCI bridge> at 0.0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NeoMagic model 0016 VGA-compatible display device> at 0.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <Intel 82371AB Power management controller> at 7.3 pci0: <unknown card> (vendor=0x104d, dev=0x8039) at 8.0 irq 9 pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0 pci0: <unknown card> (vendor=0x14f1, dev=0x2443) at 10.0 irq 9 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem 0xfec00000-0xfecfffff,0xfedf6000-0xfedf6fff irq 9 at device 11.0 on pci0 fxp0: Ethernet address 08:00:46:07:de:51 pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 12.0 on pci0 pci0: <unknown card> (vendor=0x104d, dev=0x808a) at 13.0 irq 0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0303> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0401> can't assign resources DUMMYNET initialized (000608) IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 250 packets/entry by default IPsec: Initialized Security Association Processing. IPv6 packet filtering initialized, logging limited to 250 packets/entry ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master using UDMA33 Mounting root from ufs:/dev/ad0s2a WARNING: / was not properly dismounted Entire system suspend failure: errcode = 96 resumed from suspended mode (slept 00:00:13) ata0: resetting devices .. done pcm0: play interrupt timeout, channel dead resumed from suspended mode (slept 00:00:10) ata0: resetting devices .. done resumed from suspended mode (slept 00:00:13) ata0: resetting devices .. done pcm0: play interrupt timeout, channel dead Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Waiting (max 60 seconds) for system process `syncer' to stop...stopped syncing disks... done Uptime: 24m21s Rebooting... Copyright (c) 1992-2000 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-20000815-CURRENT #0: Thu Aug 24 16:48:16 CDT 2000 keichii@iterative.iteration.net:/usr/src/sys/compile/ITERATIVE.test Timecounter "i8254" frequency 1193182 Hz CPU: Pentium III/Pentium III Xeon/Celeron (496.31-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x683 Stepping = 3 Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM> real memory = 134152192 (131008K bytes) avail memory = 124919808 (121992K bytes) Preloaded elf kernel "kernel" at 0xc0461000. Preloaded elf module "vesa.ko" at 0xc046109c. seq0-63: Midi sequencers. Pentium Pro MTRR support enabled VESA: v2.0, 6080k memory, flags:0x0, mode table:0xc045e2c2 (1000022) VESA: MagicMedia 256XL+ 48K md0: Malloc disk apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pci0: <Intel 82443BX (440 BX) host to PCI bridge> at 0.0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NeoMagic model 0016 VGA-compatible display device> at 0.0 irq 9 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xfc90-0xfc9f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xfca0-0xfcbf irq 9 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered pci0: <Intel 82371AB Power management controller> at 7.3 pci0: <unknown card> (vendor=0x104d, dev=0x8039) at 8.0 irq 9 pcm0: <Yamaha DS-1E (YMF744)> port 0xfc8c-0xfc8f,0xfcc0-0xfcff mem 0xfedf8000-0xfedfffff irq 9 at device 9.0 on pci0 pci0: <unknown card> (vendor=0x14f1, dev=0x2443) at 10.0 irq 9 fxp0: <Intel Pro 10/100B/100+ Ethernet> port 0xfc40-0xfc7f mem 0xfec00000-0xfecfffff,0xfedf6000-0xfedf6fff irq 9 at device 11.0 on pci0 fxp0: Ethernet address 08:00:46:07:de:51 pcic-pci0: <Ricoh RL5C475 PCI-CardBus Bridge> at device 12.0 on pci0 pci0: <unknown card> (vendor=0x104d, dev=0x808a) at 13.0 irq 0 fdc0: direction bit not set fdc0: cmd 3 failed at out byte 1 of 3 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model GlidePoint, device ID 0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> pcic0: <Intel i82365> at port 0x3e0 iomem 0xd0000 on isa0 pcic0: Polling mode pccard0: <PC Card bus -- kludge version> on pcic0 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/8 bytes threshold lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port plip0: <PLIP network interface> on ppbus0 ppi0: <Parallel I/O> on ppbus0 unknown: <PNP0303> can't assign resources unknown: <PNP0501> can't assign resources unknown: <PNP0401> can't assign resources DUMMYNET initialized (000608) IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to deny, logging limited to 250 packets/entry by default IPsec: Initialized Security Association Processing. IPv6 packet filtering initialized, logging limited to 250 packets/entry ad0: 11513MB <IBM-DARA-212000> [23392/16/63] at ata0-master using UDMA33 Mounting root from ufs:/dev/ad0s2a pcm0: hwptr went backwards 132 -> 3504 pcm0: hwptr went backwards 2980 -> 2196 pcm0: hwptr went backwards 1632 -> 1240 pcm0: hwptr went backwards 2204 -> 2192 pcm0: hwptr went backwards 860 -> 420 --h31gzZEtNLTqOjlF Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dumpcis_dvdrom.txt" The kernel won't boot if I have the DVDROM in the PCMCIA slot. If I insert the card after the system boots, the following is output ===== Configuration data for card in slot 0 Tuple #1, code = 0xff (Terminator), length = 0 1 slots found --h31gzZEtNLTqOjlF Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="relevant_var_log_messages.txt" Aug 24 13:23:29 iterative /kernel: pcm0: play interrupt timeout, channel dead Aug 24 13:23:46 iterative /kernel: pcm0: play interrupt timeout, channel dead Aug 24 13:23:49 iterative /kernel: fxp0: device timeout Aug 24 13:23:49 iterative /kernel: usb0: host controller halted Aug 24 13:23:53 iterative last message repeated 4 times Aug 24 13:23:54 iterative /kernel: pcm0: play interrupt timeout, channel dead Aug 24 13:24:00 iterative /kernel: usb0: host controller halted Aug 24 13:24:47 iterative last message repeated 22 times Aug 24 13:24:51 iterative /kernel: pcm0: play interrupt timeout, channel dead Aug 24 13:24:52 iterative /kernel: usb0: host controller halted Aug 24 13:25:18 iterative last message repeated 15 times Aug 24 13:27:22 iterative last message repeated 24 times Aug 24 13:27:27 iterative /kernel: usb0: host controller halted Aug 24 13:27:27 iterative /kernel: usb0: host controller halted Aug 24 13:27:33 iterative last message repeated 2 times Aug 24 13:27:39 iterative shutdown: reboot by keichii: Aug 24 13:27:42 iterative syslogd: exiting on signal 15 Aug 24 16:09:22 iterative /kernel: usb0: host controller halted Aug 24 16:09:22 iterative last message repeated 39 times Aug 24 16:09:22 iterative /kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...usb0: host controller halted Aug 24 16:09:22 iterative /kernel: usb0: host controller halted Aug 24 16:09:22 iterative /kernel: stopped Aug 24 16:09:22 iterative /kernel: Waiting (max 60 seconds) for system process `syncer' to stop...stopped Aug 24 16:09:22 iterative /kernel: Aug 24 16:09:22 iterative /kernel: syncing disks... 3 Aug 24 16:09:22 iterative /kernel: done Aug 24 16:09:22 iterative /kernel: Uptime: 10h16m21s Aug 24 16:40:24 iterative /kernel: pcm0: play interrupt timeout, channel dead Aug 24 16:41:35 iterative /kernel: pcm0: play interrupt timeout, channel dead Aug 24 16:45:57 iterative /kernel: fxp0: device timeout Aug 24 16:45:57 iterative /kernel: usb0: host controller halted Aug 24 16:46:31 iterative last message repeated 5 times Aug 24 16:48:23 iterative last message repeated 19 times Aug 24 16:48:27 iterative shutdown: power-down by keichii: Aug 24 16:51:23 iterative /kernel: usb0: host controller halted Aug 24 16:51:23 iterative last message repeated 3 times Aug 24 16:51:23 iterative /kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...usb0: host controller halted Aug 24 16:51:23 iterative /kernel: usb0: host controller halted Aug 24 16:51:23 iterative /kernel: stopped Aug 24 16:51:23 iterative /kernel: Waiting (max 60 seconds) for system process `syncer' to stop...stopped Aug 24 16:51:23 iterative /kernel: Aug 24 16:51:23 iterative /kernel: syncing disks... 5 3 1 1 1 1 1 1 1 1 1 1 1 1 1 usb0: host controller halted Aug 24 16:51:23 iterative /kernel: 1 usb0: host controller halted Aug 24 16:51:23 iterative /kernel: 1 usb0: host controller halted Aug 24 16:51:23 iterative /kernel: usb0: host controller halted Aug 24 16:51:23 iterative /kernel: 1 usb0: host controller halted Aug 24 16:51:23 iterative /kernel: 1 usb0: host controller halted Aug 24 16:51:23 iterative /kernel: 1 Aug 24 16:51:23 iterative /kernel: giving up on 1 buffers Aug 24 16:51:23 iterative /kernel: Uptime: 39m45s Aug 24 16:51:23 iterative /kernel: Aug 24 16:51:23 iterative /kernel: The operating system has halted. Aug 24 16:51:23 iterative /kernel: Please press any key to reboot. Aug 24 16:51:23 iterative /kernel: Aug 24 16:51:23 iterative /kernel: Rebooting... Suspending Aug 24 16:53:49 iterative apmd[178]: apmevent 0003 index 1 Aug 24 16:53:50 iterative apmd: resumed at 20000824 16:53:50 Aug 24 16:53:59 iterative /kernel: pcm0: play interrupt timeout, channel dead Aug 24 16:54:23 iterative /kernel: resumed from suspended mode (slept 00:00:10) Aug 24 16:54:24 iterative /kernel: ata0: resetting devices .. done Aug 24 16:54:23 iterative apmd[178]: apmevent 0003 index 2 Aug 24 16:54:23 iterative apmd: resumed at 20000824 16:54:23 Aug 24 16:54:36 iterative apmd[318]: start Aug 24 16:54:47 iterative apmd[323]: start Aug 24 16:55:04 iterative /kernel: resumed from suspended mode (slept 00:00:13) Aug 24 16:55:05 iterative /kernel: ata0: resetting devices .. done Aug 24 16:55:04 iterative apmd[323]: apmevent 0003 index 3 Aug 24 16:55:04 iterative apmd: resumed at 20000824 16:55:04 Aug 24 16:55:13 iterative /kernel: pcm0: play interrupt timeout, channel dead Aug 24 17:14:21 iterative shutdown: reboot by keichii: Aug 24 17:14:24 iterative syslogd: exiting on signal 15 Aug 24 17:15:18 iterative /kernel: Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped Aug 24 17:15:18 iterative /kernel: Waiting (max 60 seconds) for system process `syncer' to stop...stopped Aug 24 17:15:18 iterative /kernel: Aug 24 17:15:18 iterative /kernel: syncing disks... Aug 24 17:15:18 iterative /kernel: done Aug 24 17:15:18 iterative /kernel: Uptime: 24m21s Aug 24 17:15:18 iterative /kernel: apm0: <APM BIOS> on motherboard Aug 24 17:15:18 iterative /kernel: apm0: found APM BIOS v1.2, connected at v1.2 DVDROM Aug 24 17:48:33 iterative /kernel: pccard: card inserted, slot 0 Aug 24 17:48:39 iterative pccardd[54]: No card in database for "(null)"("(null)") --h31gzZEtNLTqOjlF Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="ITERATIVE.hints" # $FreeBSD: src/sys/i386/conf/GENERIC.hints,v 1.3 2000/07/19 16:32:38 imp Exp $ hint.fdc.0.at="isa" hint.fdc.0.port="0x3F0" hint.fdc.0.irq="6" hint.fdc.0.drq="2" hint.fd.0.at="fdc0" hint.fd.0.drive="0" hint.fd.1.at="fdc0" hint.fd.1.drive="1" hint.ata.0.at="isa" hint.ata.0.port="0x1F0" hint.ata.0.irq="14" hint.ata.1.at="isa" hint.ata.1.port="0x170" hint.ata.1.irq="15" hint.adv.0.at="isa" hint.bt.0.at="isa" hint.aha.0.at="isa" hint.aic.0.at="isa" hint.atkbdc.0.at="isa" hint.atkbdc.0.port="0x060" hint.atkbd.0.at="atkbdc" hint.atkbd.0.irq="1" hint.atkbd.0.flags="0x1" hint.psm.0.at="atkbdc" hint.psm.0.irq="12" hint.vga.0.at="isa" hint.sc.0.at="isa" hint.sc.0.flags="0x100" hint.vt.0.at="isa" hint.npx.0.at="nexus" hint.npx.0.port="0x0F0" hint.npx.0.irq="13" hint.apm.0.at="nexus" #hint.apm.0.disabled="1" hint.apm.0.flags="0x20" hint.pcic.0.at="isa" # hint.pcic.0.irq="10" # Default to polling hint.pcic.0.port="0x3e0" hint.pcic.0.maddr="0xd0000" hint.pcic.1.at="isa" hint.pcic.1.irq="11" hint.pcic.1.port="0x3e2" hint.pcic.1.maddr="0xd4000" hint.pcic.1.disabled="1" hint.sio.0.at="isa" hint.sio.0.port="0x3F8" hint.sio.0.flags="0x10" hint.sio.0.irq="4" hint.sio.1.at="isa" hint.sio.1.port="0x2F8" hint.sio.1.irq="3" hint.sio.2.at="isa" hint.sio.2.disabled="1" hint.sio.2.port="0x3E8" hint.sio.2.irq="5" hint.sio.3.at="isa" hint.sio.3.disabled="1" hint.sio.3.port="0x2E8" hint.sio.3.irq="9" hint.ppc.0.at="isa" hint.ppc.0.irq="7" hint.ed.0.at="isa" hint.ed.0.port="0x280" hint.ed.0.irq="10" hint.ed.0.maddr="0xd8000" hint.cs.0.at="isa" hint.cs.0.port="0x300" hint.sn.0.at="isa" hint.sn.0.port="0x300" hint.sn.0.irq="10" hint.ie.0.at="isa" hint.ie.0.port="0x300" hint.ie.0.irq="10" hint.ie.0.maddr="0xd0000" hint.fe.0.at="isa" hint.fe.0.port="0x300" hint.le.0.at="isa" hint.le.0.port="0x300" hint.le.0.irq="5" hint.le.0.maddr="0xd0000" hint.lnc.0.at="isa" hint.lnc.0.port="0x280" hint.lnc.0.irq="10" hint.lnc.0.drq="0" --h31gzZEtNLTqOjlF Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="ITERATIVE.test" # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please read the handbook section on # Kernel Configuration Files: # # http://www.FreeBSD.org/handbook/kernelconfig-config.html # # The handbook is also available locally in /usr/share/doc/handbook # if you've installed the doc distribution, otherwise always see the # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the # latest information. # # An exhaustive list of options and more detailed explanations of the # device lines is also present in the NOTES configuration file. If you are # in doubt as to the purpose or necessity of a line, check first in NOTES. # # $FreeBSD: src/sys/i386/conf/GENERIC,v 1.269 2000/07/29 02:12:44 obrien Exp $ machine i386 #cpu I386_CPU #cpu I486_CPU #cpu I586_CPU cpu I686_CPU ident ITERATIVE maxusers 256 hints "ITERATIVE.hints" #Default places to look for devices. makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols options DDB options KTRACE #kernel tracing #options MATH_EMULATE #Support for x87 emulation options INET #InterNETworking options INET6 #IPv6 communications protocols options FFS #Berkeley Fast Filesystem options FFS_ROOT #FFS usable as root device [keep this!] options SOFTUPDATES #Enable FFS soft updates support options MFS #Memory Filesystem options MD_ROOT #MD is a potential root device options NFS #Network Filesystem options NFS_ROOT #NFS usable as root device, NFS required options MSDOSFS #MSDOS Filesystem options NTFS #NT File System options CD9660 #ISO 9660 Filesystem options CD9660_ROOT #CD-ROM usable as root, CD9660 required options PROCFS #Process filesystem options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!] options SCSI_DELAY=15000 #Delay (in ms) before probing SCSI options UCONSOLE #Allow users to grab the console options USERCONFIG #boot -c editor options VISUAL_USERCONFIG #visual boot -c editor options KTRACE #ktrace(1) support options SYSVSHM #SYSV-style shared memory options SYSVMSG #SYSV-style message queues options SYSVSEM #SYSV-style semaphores options P1003_1B #Posix P1003_1B real-time extensions options _KPOSIX_PRIORITY_SCHEDULING options KBD_INSTALL_CDEV # install a CDEV entry in /dev options RANDOMDEV #entropy device options CPU_FASTER_5X86_FPU options NO_F00F_HACK # To make an SMP kernel, the next two are needed #options SMP # Symmetric MultiProcessor Kernel #options APIC_IO # Symmetric (APIC) I/O # Optionally these may need tweaked, (defaults shown): #options NCPU=2 # number of CPUs #options NBUS=8 # number of busses #options NAPIC=1 # number of IO APICs #options NINTR=24 # number of INTs device isa device eisa device pci options COMPAT_OLDISA # compatability shims for lnc, fe, le options COMPAT_OLDPCI # compatability shims for lnc, vx # Floppy drives device fdc # ATA and ATAPI devices device ata device atadisk # ATA disk drives device atapicd # ATAPI CDROM drives device atapifd # ATAPI floppy drives device atapist # ATAPI tape drives options ATA_STATIC_ID #Static device numbering options ATA_ENABLE_ATAPI_DMA #Enable DMA on ATAPI devices # SCSI Controllers #device ahb # EISA AHA1742 family #device ahc # AHA2940 and onboard AIC7xxx devices #device amd # AMD 53C974 (Teckram DC-390(T)) #device dpt # DPT Smartcache - See NOTES for options! #device isp # Qlogic family #device ncr # NCR/Symbios Logic #device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') #device adv #device adw #device bt #device aha 1 #device aic # SCSI peripherals device scbus # SCSI bus (required) device da # Direct Access (disks) device sa # Sequential Access (tape etc) device cd # CD device pass # Passthrough device (direct SCSI access) # RAID controllers #device ida # Compaq Smart RAID #device amr # AMI MegaRAID #device mlx # Mylex DAC960 family # atkbdc0 controls both the keyboard and the PS/2 mouse device atkbdc 1 device atkbd device psm device vga # splash screen/screen saver device splash # syscons is the default console driver, resembling an SCO console device sc 1 options SC_NORM_ATTR=(FG_GREEN|BG_BLACK) options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN) options SC_KERNEL_CONS_ATTR=(FG_LIGHTRED|BG_BLACK) options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED) options SC_HISTORY_SIZE=5000 # Enable this for the pcvt (VT220 compatible) console driver #device vt #options XSERVER # support for X server on a vt console #options FAT_CURSOR # start with block cursor # If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines #options PCVT_SCANSET=2 # IBM keyboards are non-std # Floating point support - do not disable. device npx # Power management support (see NOTES for more options) device apm options PSM_RESETAFTERSUSPEND options POWERFAIL_NMI # make it beep instead of panicing # PCCARD (PCMCIA) support device card device pcic # Serial (COM) ports device sio # Parallel port device ppc device ppbus # Parallel port bus (required) device lpt # Printer device plip # TCP/IP over parallel device ppi # Parallel port interface device #device vpo # Requires scbus and da # PCI Ethernet NICs. #device de # DEC/Intel DC21x4x (``Tulip'') device fxp # Intel EtherExpress PRO/100B (82557, 82558) #device tx # SMC 9432TX (83c170 ``EPIC'') #device vx # 3Com 3c590, 3c595 (``Vortex'') #device wx # Intel Gigabit Ethernet Card (``Wiseman'') # PCI Ethernet NICs that use the common MII bus controller code. #device miibus # MII bus support #device dc # DEC/Intel 21143 and various workalikes #device rl # RealTek 8129/8139 #device sf # Adaptec AIC-6915 (``Starfire'') #device sis # Silicon Integrated Systems SiS 900/SiS 7016 #device ste # Sundance ST201 (D-Link DFE-550TX) #device tl # Texas Instruments ThunderLAN #device vr # VIA Rhine, Rhine II #device wb # Winbond W89C840F #device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') # ISA Ethernet NICs. #device ed #device ex #device ep #device cs #device sn # WaveLAN/IEEE 802.11 wireless NICs. Note: the WaveLAN/IEEE really # exists only as a PCMCIA device, so there is no ISA attatement needed # and resources will always be dynamically assigned by the pccard code. #device wi # Aironet 4500/4800 802.11 wireless NICs. Note: the declaration below will # work for PCMCIA and PCI cards, as well as ISA cards set to ISA PnP # mode (the factory default). If you set the switches on your ISA # card for a manually chosen I/O address and IRQ, you must specify # those paremeters here. #device an # BayStack 660 and others #device awi # Xircom pccard ethernet #device xe # The probe order of these is presently determined by i386/isa/isa_compat.c. #device ie #device fe #device le #device lnc # Pseudo devices - the number indicates how many units to allocated. device loop # Network loopback device ether # Ethernet support device sl # Kernel SLIP device ppp 1 # Kernel PPP device tun # Packet tunnel. device pty # Pseudo-ttys (telnet etc) device md # Memory "disks" device gif 4 # IPv6 and IPv4 tunneling device faith 1 # IPv6-to-IPv4 relaying (translation) device snp 4 # The `bpf' device enables the Berkeley Packet Filter. # Be aware of the administrative consequences of enabling this! device bpf 4 # Berkeley packet filter # USB support device uhci # UHCI PCI->USB interface device ohci # OHCI PCI->USB interface device usb # USB Bus (required) #device udbp # USB Double Bulk Pipe devices device ugen # Generic device uhid # "Human Interface Devices" device ukbd # Keyboard device ulpt # Printer device umass # Disks/Mass storage - Requires scbus and da device ums # Mouse device urio # Diamond Rio 500 MP3 player # USB Ethernet, requires mii #device aue # ADMtek USB ethernet #device cue # CATC USB ethernet #device kue # Kawasaki LSI USB ethernet options IPSEC #IP security options IPSEC_ESP #IP security (crypto; define w/ IPSEC) options IPSEC_DEBUG #debug for IP security options NETATALK #Appletalk communications protocols options IPFIREWALL #firewall options IPFIREWALL_VERBOSE #print information about # dropped packets options IPFIREWALL_FORWARD #enable transparent proxy support options IPFIREWALL_VERBOSE_LIMIT=250 #limit verbosity #options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default options IPV6FIREWALL #firewall for IPv6 options IPV6FIREWALL_VERBOSE options IPV6FIREWALL_VERBOSE_LIMIT=250 #options IPV6FIREWALL_DEFAULT_TO_ACCEPT options IPDIVERT #divert sockets options TCPDEBUG options DUMMYNET options QUOTA #enable disk quotas device pcm device sbc device midi device seq # The bridge drivers for sound cards. These can be seperately configured # for providing services to the likes of new-midi. # When used with 'device pcm' they also provide pcm sound services. # device sbc # : Creative SoundBlaster ISA PnP/non-PnP # Supports ESS and Avance ISA chips as well. # gusc: Gravis UltraSound ISA PnP/non-PnP # csa: Crystal Semiconductor CS461x/428x PCI --h31gzZEtNLTqOjlF-- To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-mobile" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000824175536.D1353>