Date: Mon, 4 Sep 2000 12:26:39 -0500 From: Larry Rosenman <ler@lerctr.org> To: freebsd-questions@freebsd.org Subject: PNP Id's: Anyone know what these are? Message-ID: <20000904122639.A15357@lerbsd.lerctr.org>
next in thread | raw e-mail | index | archive | help
Anyone have any idea on what these PNP id's are? Or what I need to add to
get them recognized?
Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.1-STABLE #47: Sat Sep 2 22:48:36 CDT 2000
ler@lerbsd.lerctr.org:/usr/src/sys/compile/LERBSD
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x683 Stepping = 3
Features=0x387f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,PN,MMX,FXSR,XMM>
real memory = 134152192 (131008K bytes)
avail memory = 127586304 (124596K bytes)
Preloaded elf kernel "kernel" at 0xc02f5000.
Pentium Pro MTRR support enabled
apm0: <APM BIOS> on motherboard
apm: found APM BIOS v1.2, connected at v1.2
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
pcib2: <VIA 82C598MVP (Apollo MVP3) PCI-PCI (AGP) bridge> at device 1.0 on pci0
pci1: <PCI bus> on pcib2
pci1: <ATI Rage128-RF graphics accelerator> at 0.0 irq 11
isab0: <VIA 82C596B PCI-ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
pci0: <VIA Apollo ATA controller> at 7.1
pci0: <VIA 83C572 USB controller> at 7.2 irq 10
ahc0: <Adaptec 2940 SCSI adapter> port 0xe800-0xe8ff mem 0xe3000000-0xe3000fff irq 10 at device 12.0 on pci0
ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs
pcib1: <Host to PCI bridge> on motherboard
pci2: <PCI bus> on pcib1
ep0: <3Com 3C509-Combo EtherLink III> at port 0x300-0x30f irq 15 on isa0
ep0: Ethernet address 00:20:af:9e:29:d4
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
ppbus0: IEEE1284 device found
Probing for PnP devices on ppbus0:
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sbc0: <Soundblaster 16> at port 0x220-0x22f irq 5 drq 1 flags 0x15 on isa0
sbc0: setting card to irq 5, drq 1, 5
pcm0: <SB DSP 4.12> on sbc0
unknown: <PNP0000> can't assign resources
unknown0: <PNP0200> at port 0-0xf,0x81-0x83,0x87,0x89-0x8b,0x8f-0x91,0xc0-0xdf drq 4 on isa0
unknown1: <PNP0100> at port 0x40-0x43 irq 0 on isa0
unknown2: <PNP0b00> at port 0x70-0x71 irq 8 on isa0
unknown: <PNP0303> can't assign resources
unknown3: <PNP0800> at port 0x61 on isa0
unknown4: <PNP0c04> at port 0xf0-0xff irq 13 on isa0
unknown5: <PNP0c01> at iomem 0-0x9ffff,0xfffe0000-0xffffffff,0x100000-0x7ffffff on isa0
unknown6: <PNP0c02> at iomem 0xf0000-0xf3fff,0xf4000-0xfffff,0xce800-0xcffff,0xc8000-0xc9fff on isa0
unknown7: <PNP0a03> at port 0x294-0x297,0x4d0-0x4d1,0xcf8-0xcff,0x480-0x48f,0x4000-0x407f,0x4080-0x40ff,0x5000-0x501f on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0700> can't assign resources
unknown: <PNP0401> can't assign resources
unknown: <PNP0501> can't assign resources
unknown: <PNP0f13> can't assign resources
Waiting 5 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da1 at ahc0 bus 0 target 1 lun 0
da1: <SEAGATE ST34520N 1498> Fixed Direct Access SCSI-2 device
da1: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da1: 4340MB (8888924 512 byte sectors: 64H 32S/T 4340C)
da2 at ahc0 bus 0 target 2 lun 0
da2: <SEAGATE ST31230N 0290> Fixed Direct Access SCSI-2 device
da2: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da2: 1010MB (2069860 512 byte sectors: 64H 32S/T 1010C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST31230N 0290> Fixed Direct Access SCSI-2 device
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da0: 1010MB (2069860 512 byte sectors: 64H 32S/T 1010C)
cd0 at ahc0 bus 0 target 3 lun 0
cd0: <TOSHIBA CD-ROM XM-6401TA 1009> Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da3 at ahc0 bus 0 target 6 lun 0
da3: <IBM DDRS-39130 S92A> Fixed Direct Access SCSI-2 device
da3: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing Enabled
da3: 8715MB (17850000 512 byte sectors: 64H 32S/T 8715C)
Kernel Config:
#
# LERBSD
#
machine i386
cpu I686_CPU
ident LERBSD
maxusers 64
###LER###
options NO_F00F_HACK
options NO_MEMORY_HOLE
options SOFTUPDATES
options PERFMON
makeoptions COPTFLAGS="-O -pipe -march=pentiumpro"
###LER###
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
options INET #InterNETworking
options INET6 #IPv6 communications protocols
options FFS #Berkeley Fast Filesystem
options FFS_ROOT #FFS usable as root device [keep this!]
options COMPAT_43 #Compatible with BSD 4.3 [KEEP THIS!]
options SCSI_DELAY=5000 #Delay (in ms) before probing SCSI
options UCONSOLE #Allow users to grab the console
options KTRACE #ktrace(1) support
options SYSVSHM #SYSV-style shared memory
options SYSVMSG #SYSV-style message queues
options SYSVSEM #SYSV-style semaphores
options P1003_1B #Posix P1003_1B real-time extentions
options _KPOSIX_PRIORITY_SCHEDULING
options ICMP_BANDLIM #Rate limit bad replies
options PNPBIOS
# To make an SMP kernel, the next two are needed
#options SMP # Symmetric MultiProcessor Kernel
#options APIC_IO # Symmetric (APIC) I/O
# Optionally these may need tweaked, (defaults shown):
#options NCPU=2 # number of CPUs
#options NBUS=4 # number of busses
#options NAPIC=1 # number of IO APICs
#options NINTR=24 # number of INTs
device isa
device pci
# Floppy drives
device fdc0 at isa? port IO_FD1 irq 6 drq 2
device fd0 at fdc0 drive 0
# SCSI Controllers
device ahc0 # AHA2940 and onboard AIC7xxx devices
# SCSI peripherals
device scbus0 at ahc0 # SCSI bus (required)
device da0 at scbus0 bus 0 target 0 unit 0 # Direct Access (disks)
device da1 at scbus0 bus 0 target 1 unit 0 # Direct Access (disks)
device da2 at scbus0 bus 0 target 2 unit 0 # Direct Access (disks)
device da3 at scbus0 bus 0 target 6 unit 0 # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd0 at scbus0 bus 0 target 3 unit 0 # CD
device pass # Passthrough device (direct SCSI access)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device atkbdc0 at isa? port IO_KBD
device atkbd0 at atkbdc? irq 1
device psm0 at atkbdc? irq 12
device vga0 at isa?
# splash screen/screen saver
pseudo-device splash
# syscons is the default console driver, resembling an SCO console
device sc0 at isa?
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device vt0 at isa?
#options XSERVER # support for X server on a vt console
#options FAT_CURSOR # start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options PCVT_SCANSET=2 # IBM keyboards are non-std
# Floating point support - do not disable.
device npx0 at nexus? port IO_NPX irq 13
# Power management support (see LINT for more options)
device apm0 at nexus? # flags 0x20 # Advanced Power Management
# Serial (COM) ports
device sio0 at isa? port IO_COM1 flags 0x10 irq 4
device sio1 at isa? port IO_COM2 irq 3
# Parallel port
device ppc0 at isa? irq 7
device ppbus # Parallel port bus (required)
device lpt # Printer
#device plip # TCP/IP over parallel
#device ppi # Parallel port interface device
#device vpo # Requires scbus and da
# ISA Ethernet NICs.
device ep
# Pseudo devices - the number indicates how many units to allocated.
pseudo-device loop # Network loopback
pseudo-device ether # Ethernet support
#pseudo-device sl 1 # Kernel SLIP
#pseudo-device ppp 1 # Kernel PPP
pseudo-device tun # Packet tunnel.
pseudo-device pty # Pseudo-ttys (telnet etc)
pseudo-device gif 4 # IPv6 and IPv4 tunneling
pseudo-device faith 1 # IPv6-to-IPv4 relaying (translation)
# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device bpf #Berkeley packet filter
# USB support
#device uhci # UHCI PCI->USB interface
#device ohci # OHCI PCI->USB interface
#device usb # USB Bus (required)
#device ugen # Generic
#device uhid # "Human Interface Devices"
#device ukbd # Keyboard
#device ulpt # Printer
#device umass # Disks/Mass storage - Requires scbus and da
#device ums # Mouse
# USB Ethernet, requires mii
#device aue # ADMtek USB ethernet
#device cue # CATC USB ethernet
#device kue # Kawasaki LSI USB ethernet
device sbc0 at isa? port 0x220 irq 5 drq 1 flags 0x15
device pcm0
To Unsubscribe: send mail to majordomo@FreeBSD.org
with "unsubscribe freebsd-questions" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?20000904122639.A15357>